Tags: Record cleaning brushes

Notes: Keep your vinyl collection in pristine condition with this specially designed antistatic brush. Designed to clear the fine grooves of dust & fluff without damaging the delicate playing surfaces, an essential requirement for maintaining optimum reproduction quality.

Notes: The Acc Sees velvet antistatic vinyl brush cleans away dirt & grease while reducing static build up. This helps to improve sound reproduction quality and prolong the life expectancy of vinyl discs.

Notes: Drain the static charge from your records and lift any residual dust and grime with the anti-static vinyl brush.
The conductivity of the brush's carbon fibre bristles eliminates static charges while gently and efficiently removing the dust, grit and particles that bung up your vinyl's grooves and degrade your record's sound.
The conductive carbon fibres reach deep into the grooves of your vinyl to remove even the smallest particles, leaving your records clean while prolonging the life of vinyl and stylus.

- Hand-made carbon hair brush for removing dust from vinyl records
- The brush makes the record antistatic so it does not attract dust
- For those who care for their collection of vintage or brand new vinyl records
- Can also be used for Schellack records

Notes: The Brush IT from Pro-Ject is a must have accessory to ensure your vinyl is free from dust before playing. You just simply brush around the surface of an LP after placing it on your turntable to remove any settled dust, providing a clear path for your stylus. It features 2 sets of soft carbon fibre brushes on each side for effective dust removal.

Notes: This brush is manufactured is made of ultra-fine pile very high quality velvet, specially selected for this purpose. The velvet reaches deep into the record grooves and removes even the finest dust particles. The brush itself can be easily cleaned using the two foam rubber scrapers located on both sides of the plastic brush base.

Notes: This brush contains more than one million very fine carbon fibre bristles. The cross section of these bristles is so small that they can easily get into all the nooks and crannies of the record groove. Because the carbon fiber conducts electricity it takes away all the static to earth via the metal handle and the person holding the brush. Then the dust lies loose in the groove so the next set of bristles can easily pick them up and remove them from the record groove.

Notes: This brush is manufactured from pure goat hair and is used to clean records using liquid. The shape of the bristles is such that they are perfect for entering the record grooves and cleaning them thoroughly.

Notes: This state-of-the-art DJ record cleaning brush combines the properties of the Tonar Classic brush and the Nostatic brush into one brush! The center part of the brush is made of ultra-fine pile high quality velvet. This velvet is flanked on both sides by a thick layer of very fine carbon fibers. The carbon fibers remove the static from the record so the dust lays loose and can be easily picked up by the velvet in the middle of the brush even from deep in the record grooves.

Notes: This state-of-the-art DJ record cleaning brush combines the properties of the Tonar Classic brush and the Nostatic brush into one brush! The center part of the brush is made of ultra-fine pile high quality velvet. This velvet is flanked on both sides by a thick layer of very fine carbon fibers. The carbon fibers remove the static from the record so the dust lays loose and can be easily picked up by the velvet in the middle of the brush even from deep in the record grooves.

Notes: The Audio Anatomy Vinyl-Brush made of oak wood and goat hair ensures highly efficient and easy to use dry and wet-cleaning of vinyl. The very fine goat hair enters deeply into the grooves of the vinyl and therefore removes dust very efficiently. In combination with the nylon fibres the goat hair, at the same time while cleaning the record, discharges static electricity. Thus, the two main reasons for disturbed sound reproduction, dust and electrostatics, are removed by using the Audio Anatomy Oak Wood and Goat Hair Brush.

Apart from its cleaning capabilities the brush impresses with its beautiful design and the use of natural materials coming from the EU. In order to also keep your vinyl clean from dust after the application of the Audio Anatomy Oak Wood and Goat Hair Brush, we recommend to store your vinyl in the antistatic Audio Anatomy Inner Sleeves.

Notes: The replacement Pro-Ject VC-S Vinyl Brush is made from strands of goat hair, and helps spread the Wash IT fluid across your records.

Notes: Record brush of ultra-soft velvet. Probably the most effective way to remove dust and dirt from your sheets. If your records needs a deeper round of cleaning, the velvet brush can be used with the AM record cleaner. The handle is made of Japanese Zelkova wood.

Clean sound since 1971

The vinyl record velvet brush efficiently removes the dust, grit and particles that bung up your vinyl's grooves and degrade your record's sound, leaving your records clean while prolonging the life of vinyl and stylus.

How it works

Gently hold the the brush in the grooves as the record spins. After the record makes a full rotation, angle the brush towards the outside of the record and carefully sweep the particles from the vinyl surface.

Notes: The Audio Anatomy Vinyl-Brush made of oak wood and goat hair ensures highly efficient and easy to use dry and wet-cleaning of vinyl. The very fine goat hair enters deeply into the grooves of the vinyl and therefore removes dust very efficiently. In combination with the nylon fibres the goat hair, at the same time while cleaning the record, discharges static electricity. Thus, the two main reasons for disturbed sound reproduction, dust and electrostatics, are removed by using the Audio Anatomy Oak Wood and Goat Hair Brush.

Apart from its cleaning capabilities the brush impresses with its beautiful design and the use of natural materials coming from the EU. In order to also keep your vinyl clean from dust after the application of the Audio Anatomy Oak Wood and Goat Hair Brush, we recommend to store your vinyl in the antistatic Audio Anatomy Inner Sleeves.

Notes: The ultra-fine goat hair carefully remove dust and dirt from your records. The soft, antistatic bristles reduce the build-up of static electricity and give you a crisp, clean sound. Can be used with AM record cleaner for a deeper cleaning. The handle is made of Japanese Zelkova wood.

Clean sound since 1971

Drain the static charge from your records and lift any residual dust and grime. The conductivity of the brush's ultra-fine goat hairs eliminates static charges while gently and efficiently removing the dust, grit and particles that bung up your vinyl's grooves and degrade your record's sound. The hair reach deep into the grooves of your vinyl to remove even the smallest particles, leaving your records clean while prolonging the life of vinyl and stylus.

How it works

Gently hold the the brush in the grooves as the record spins. After the record makes a full rotation, angle the brush towards the outside of the record and carefully sweep the particles from the vinyl surface.

Notes: Carbon fiber cleaning brush. Use between wet cleanings.

This revolutionary brush is made up of over 1 million .06 mm diameter carbon fibers. Removes dust, dirt and neutralizes static.

Notes: Highly efficient and easy to use dry-cleaning of vinyl // Antistatic discharge // Soft ultrafine carbon fibres for gentle and effective cleaning // Stowable handle for removing dust

Notes: The Tonar Plastigoat is a high quality record brush with two rows of ultra-soft real natural goat hair. A perfect brush to use for wet cleaning of your vinyl records. The naturally anti-static bristles prevent static build-up and the steady handle provides perfect grip while cleaning your record collection.

Notes: Vinyl Styl Premium Conductive Anti-Static Record Cleaning Brush (White)

The Vinyl Sytl Micro Fiber Conductive Anti-Static brush eliminates static from your vinyl records. Less static equals less duct to clean off the record surface.

Removes and eliminiates dust that would harm your LP sound quality and harm the record grooves and your turntable stylus.

The long brush head is designed to cover a stadard LP from the record edge to the label allowing you to clean the entire record surface in one pass. Single path cleaning eliminates the issue that smaller brushes can have of moving dust and dirt from one area to the next.

Product Features

Conductive Carbon Micro Fiber bristles.

Anti-Static.

Works on all record types and sizes. 12"/10"/7" - 33/45/78 Speed records

White

Vinyl Styl provides the highest level of sustainability for your records and accessories, while most importantly remaining affordable.

Notes: The Micro-Mu is a wet record cleaning brush that features special ultra fine bristles and a solid plastic handle. The bristles are under 50 microns thick, so incredibly thin making them reach further into the grooves than most, for a really deep clean. They bristles are very soft and perfect for use when wet, making this brush ideal for any fluid based vacuum cleaning regime you use on your LPs. The sculptured solid handle makes using it a pleasure too. Please note that some light shedding of bristles can occur especially when new, but as it's intended to be used with a vacuum record cleaner this isn't likely to ever be an issue.

Notes: The long-selling cleaner Argento is available as a WET type, featuring a special velvet.

With the LP Record Label Protector CLP01, it can be used a cleaning solution.

The WET type is made for wiping wet only, so you can't wipe dry.

How to use:
Spray Argento with cleaning solution (SPW01 / sold separately) and brush it along the groove of a record, then wipe off the dirt with the CLV30 (sold separately) or a soft cloth.
After each use, dry the cleaner well, dust it off, and then store it in a case. If the unit becomes brown and dirty, it is recommended that you replace the unit as soon as possible. The recommendation is to buy two of them, one for tap water and one for SPW01, and use them separately.