ESI

Notes: Build upon the legacy of our famous nEar05 models, the new aktiv 05 near field reference monitor take professional level 5" near field monitoring speakers for the entry level to yet another level.

The monitor boasts an ultra-flat low frequency response with its newly designed larger silk dome tweeter and the top quality kevlar 5" driver delivers unparalleled punch in the low-mid frequency - a major improvement over the paper and polypropylene drivers used in most comparable products. ESI was the first vendor using kevlar for studio monitors in this price range as material inside the low frequency driver. Other vendors have since copied our idea, however there is much more to excellent sound of aktiv 05. A new tuning of all components by our engineers in Germany and the use of the completelely new crossover design, turn aktiv 05 into yet another milestone in the ESI studio monitor legacy.

Optionally an aktiv 05 based monitoring system can be expanded with a subwoofer like our aktiv 10s. aktiv 05 is the perfect alternative to our higher end uniK 05+ reference monitor if you are on a budget.

Features
2-way powered speaker / active studio monitor speaker
5" kevlar curved cone (magnetic shielding type) as LF driver
1" silk dome tweeter as HF driver
output power 60W (HF 30W, LF 30W), 85W AC consumption power
magnetically shielded for desktop operation
input connections: XLR / TS1/4" combo connector, balanced / unbalanced input
input impedance: 23.3 kOhm balanced, 13.3 kOhm unbalanced
input sensitivity: 75mV@1Watt, 415mV@30Watt
frequency response: 50Hz - 20kHz
crossover frequency: 2.5 kHz
SPL: 88dB +/- 3dB
operating voltage: AC100-240V 50/60Hz, with 115V / 230V AC selection switch
blue power LED on the front
standby function, can be turned on and off (only models sold in certain countries)
dimensions: 250mm (H) x 176mm (W) x 200mm (D)
weight: ca. 4.5kg

Notes: The entry into the Amber series

Upgrading ESI's legendary U22 XT, this audio interface offers maximum flexibility and excellent audio quality.

Amber i1 features a new modern eye catching design with an amber coloured volume knob that stands out from the green sand main body colour. Hardware loopback, USB-C, a completely newly designed LED display area, separate line inputs, advanced signal source selection and an exceptional audio quality in this class are just a few of the special features by Amber i1.

XLR INPUT to connect a microphone via XLR cable.
INPUT GAIN CONTROL to change the input gain / input level for Microphone and Hi-Z signals.
PEAK / INPUT LEVEL METER to check the input level.
INPUT INDICATOR to show the selected input (Line/Mic/Hi-Z/Mic+Hi-Z).
INPUT SELECTOR to change the input between Line/Mic/Hi-Z/Mic+Hi-Z.
HEADPHONE VOLUME CONTROL to change the output volume for connected headphones.
+48V PHANTOM POWER SWITCH to provide phantom power for condenser microphones.
HI-Z INPUT to connect an electric guitar with 1/4" TRS cable.
+48V INDICATOR indicates +48V phantom power.
DIRECT MONITORING CONTROL to control the monitoring mix.
MASTER VOLUME CONTROL to control the master output volume.
HEADPHONE OUTPUT to connect a headphone.
USB-C SOCKET to to connect the audio interface to a PC, Mac, or tablet.
LINE OUTPUT 1/2 to connect the audio interface to speakers or an amplifier.
LINE INPUT 1/2 to provide a line input for keyboards, synthesizers, CD-Players, etc.

Everything you need to record

Amber i1 provides everything you need to record vocals and instruments in professional studio quality. The bus powered USB-C audio interface provides superb 24-bit / 192 kHz converters and works with ultra-low latency. It features a high quality microphone preamp with 48V phantom power, a Hi-Z guitar input with gain control and dedicated line level inputs for synthesizers or sound modules.

Realtime processing and best performance

Comfortable real-time input monitoring and master volume controls are directly accessible on the front, also there is a powerful headphone output with independent volume control. Studio monitors can be connected to the balanced outputs. Amber i1 is class compliant and works with any modern Mac (Intel or M1 CPU or better), PC (Windows 10 and higher) and with many portable devices (iPhone, iPad, etc. - an optional Apple Lightning to USB adapter is required for devices with Lightning port). It is compatible with virtually all common audio software thanks to the professional low latency ASIO 2.0 driver for Windows and CoreAudio compatibility on the Mac. A powerful software package incl. the Bitwig Studio 8-Track DAW, Steinberg WaveLab LE for stereo audio editing and Steinberg Cubasis LE for iPad/iPhone is included. The package also includes 3 months of 3000 minutes for JackTrip Virtual Studio.

Perfect driver support

Amber i1 is class compliant and works with Windows 10 / 11 with a high performance EWDM driver supporting ASIO 2.0 and DirectWIRE Routing and with macOS / OS X supporting the Apple CoreAudio driver. You can also use it with iPhone or iPad. Via DirectWIRE Loopback, internal signals can be recorded and processed.

Notes: This professional 24-bit/192kHz USB-C audio interface boasts 2 inputs and 2 outputs with excellent quality, making it the ideal choice for anyone seeking exceptional audio quality and versatility. Positioned right inbetween the Amber i1 and the larger Amber i4, the Amber i2 offers a balanced blend of performance and affordability without quality compromises.

Flexible Monitoring with ADM (Advanced Direct Monitoring): Tailor your monitoring experience to your needs with various configurations and enjoy real-time, zero-latency monitoring for flawless recording sessions.

Professional Mixer: Easily mix the input sources and playback signals directly on the interface.

Bidirectional MIDI Ports: Connect your MIDI devices seamlessly and use the 2 ports as either inputs or outputs.

Modern, Eye-Catching Design: Featuring a sleek look with a functional LCD display and an amber-colored volume knob that stands out against the green sand main body color.

Ultra Low Latency Drivers: Experience high-performance audio with exceptional stability.

The Amber i2 combines top-notch features with an unbeatable price, delivering above-average quality and performance. Whether you're a seasoned professional or just starting your audio journey, the Amber i2 is your go-to interface for creating stunning audio.

Notes: ESI's 4-in, 4-out audio interface offers clear sound quality, flexible connectivity and versatile monitoring. More advanced than the smaller Amber i2, the i4 includes MIDI in and out and two headphone outputs.

Supplier's Notes:
This professional 24-bit/192kHz USB-C audio interface boasts 4 inputs and 4 outputs with excellent quality, making it the ideal choice for anyone seeking exceptional audio quality and versatility. Positioned right at the pinnacle of ESI's Amber lineup and a step above Amber i2, the Amber i4 offers unparalleled performance and affordability without quality compromises.

Flexible Monitoring with ADM (Advanced Direct Monitoring): Tailor your monitoring experience to your needs with various configurations and enjoy real-time, zero-latency monitoring for flawless recording sessions.

Professional Mixer: Easily mix the input sources and playback signals directly on the interface.

Bidirectional MIDI Ports: Connect your MIDI devices seamlessly and use the 2 ports as either inputs or outputs.

Modern, Eye-Catching Design: Featuring a sleek look with a functional LCD display and an amber-colored volume knob that stands out against the green sand main body color.

Ultra Low Latency Drivers: Experience high-performance audio with exceptional stability.

More Inputs and Outputs: Equipped with 4 inputs (including 2 line inputs on the back), 4 outputs, and 2 independent headphone outputs, providing great flexibility for various recording and playback needs, as well as A/B comparison of mixes.

The Amber i4 combines top-notch features with an unbeatable price, delivering above-average quality and performance. Whether you're a seasoned professional or just starting your audio journey, the Amber i4 is your go-to interface for creating stunning audio.

Notes: GIGAPORT eX is not like any other USB audio interface ... it's simply the multichannel playback solution with the best price value ratio on the market due to its unique set of features providing 8 independent outputs (and full 7.1 surround sound support), 2 independent stereo headphone outputs and excellent audio quality supporting up to 24-bit and 192 kHz.

The upgrade of the famous GIGAPORT HD+ provides ASIO 2.0 drivers for professional audio mixing and playback under Windows 7, Windows 8.1 and Windows 10. The hardware is also CoreAudio compatible and natively works under OS X / macOS even without the installation of a special driver.

This makes GIGAPORT eX perfect for digital DJs on the road working with notebook computers. Simply use your favourite DJ software and the eight outputs as up to 4 different stereo channels, enabling you to mix, cue and add effects! Monitor and pre-listen to your signals via the two built-in headphone outputs. GIGAPORT eX of course also works on your desktop computer and is compatible with all important professional audio DAW software applications. The hardware also works with consumer programs such as DVD playback software.

Features

USB 3.1 Audio Interface with USB-C connector (different connection cables included)
USB 2.0 compatible
24-bit / 192 kHz D/A converter with 114dB dynamic range (A-weighted), available on all output channels
8 independent output channels with -10dBV RCA connectors
2 independent stereo headphone outputs: 1st output sends l out mixed signal of all playback channels, 2nd output l sends out different signal from playback channel 1/2
Compatible with Windows 7 / 8.1 / 10 / 11 and OS X / macOS
Supports ASIO 2.0, WDM, MME with EWDM drivers as well as CoreAudio
100% class compliant
Works with OS X / mac OS (10.9 and above) with native CoreAudio support (32-bit and 64-bit)
EWDM driver for Windows 7 / 8 / 8.1 / 10 / 11 with ASIO 2.0, MME, WDM and DirectSound (32-bit and 64-bit)
DirectWIRE Loopback support under OS X / mac OS / Windows
DirectWIRE Output Channels support under Windows for dynamic output routing
compact and portable design with around 12 cm x 7 cm x 2 cm

Bundled Software

In order to get you started right out of the box, GIGAPORT eX ships with a powerful software package for professional recording, creation of your own songs, mixing of any audio content and much more. The following applications are currently included:

inTone 2 ESI Edition by Audified is a powerful jamming tool to produce mixes of multiple audio signals and instruments, play files, change tracks, prepare streams for podcasts and recordings. As an effects host you can use it with the included GK Amplification 2 LE and ampLion Free as a bass and guitar amp simulator and much more - anything you need for your creativity!

Cubasis LE is the compact version of Steinberg's mobile multitouch sequencer, providing the same look and feel of its bigger brother Cubasis. Specially designed for quick and easy operation, Cubasis LE makes recording, editing and mixing a breeze, no matter where you are, right there on an iPhone or iPad when connecting GIGAPORT eX.

Notes: The stylish and very powerful M8U eX is a modern USB 3.0 MIDI interface with a total of 16 MIDI ports in one single device.

Featuring the popular MIDI auto detection technology that was pioneered by ESI, each of these 16 ports can either be used as a MIDI input or as a MIDI output, replacing not only regular MIDI interfaces like our previous popular legacy multi port MIDI interfaces with 8 inputs and 8 outputs, but providing also other possible configurations: for instance, you can use up to 16 outputs at a time or up to 16 inputs, or any other combination, like 12 outputs and 4 inputs. Each automatic input / output configuration is displayed via colored LEDs on the front panel.

If the number of ports is not enough, you can hook up multiple M8U eX to the same computer - a feature that is made easy also via the integrated fast USB 3.0 hub that allows you to connect other USB equipment like software dongles or USB keyboards and others to your computer. This literally turns M8U eX into the central hub for the MIDI and USB devices in your studio or live performance setup.

The 100% fully class compliant device can even be bus powered (or if needed for other USB devices, it is powered via the included 5V DC power supply) and it works out of the box without the installation of additional drivers on Windows 7, Windows 8.1, Windows 10, Windows 11 and macOS systems (both 32-bit and 64-bit). Yet, there is more: it also works as a standalone Thru and Merge solution for your MIDI devices. Selected via a push button on the front panel, M8U eX provides various configurations allowing you to merge multiple MIDI signals and send them out to a single port or to send out signals through multiple ports that are coming in from just one - all based on your individual needs.

All this makes our M8U eX easily the most powerful USB MIDI interface existing on the market today.

If 16 ports are more than what you need, there is also the smaller M4U eX available, with 8 ports.

Features/specifications

USB 3.0 MIDI interface
100% class compliant, works without the installation of a driver
USB bus powered
16 MIDI ports, 8 on the front and 8 on the back
Automatic input and output detection, each port works as a MIDI input or MIDI output
Standalone operation possible
Can be used as MIDI Thru box in standalone mode to send one MIDI signal to 15 outputs
Can be used as MIDI merger in standalone mode to merge 15 MIDI signals to a single output
3-port USB 3.0 hub with external 5V DC power supply to power USB devices (power supply included)
Multiple units can be used with one computer at a time
Downwards compatible to USB 2.0 with a USB 2.0 legacy mode
Optional ESI MIDI Port driver for multi device / multi client operation under Windows available
Dimensions roughly 32.5cm x 14.5cm x 4.5cm

Notes: MAYA44 USB+ is a powerful, affordable and very stylish USB audio solution for home recording - a perfect solution for mobile live and recording applications!

Beside standard recording and playback functionality, MAYA44 USB+ provides everything that is needed for professional music production. In its compact aluminium case MAYA44 USB+ provides 4 analog input and 4 analog output channels with RCA connectors and a combined optical S/PDIF digital output / stereo headphone output. The headphone output provides a separate stereo output signal, making it perfect for DJs.

With support for ASIO 2.0, CoreAudio and MME / WDM, MAYA44 USB+ is compatible to all major music and DJ applications like Cubase, Logic, Sonar, Reason, Reaktor, MixVibes, Traktor DJ Studio, BPM Studio and much more.

Features
4 input channels and 4 output channels with RCA connectors
-10dBV input / output level (unbalanced) with improved performance
optical S/PDIF digital output with Miniplug connector
headphone output (1/8" connector) with 60mW amplifier, sends out signal from channel 1 / 2 only
MME, WDM, ASIO 2.0 and CoreAudio support
EWDM driver with DirectWIRE support under Windows
standard USB connection to PC or Mac
compatible with Windows XP, Vista, 7, 8.1, 10, 11 (32-bit / 64-bit) and Mac OS X
compatible with all important DJ software applications
compatible with all important professional audio applications
compact and portable design with around 12 cm x 7 cm x 2 cm

Notes: MIDIMATE eX is a convenient USB 2.0 MIDI interface cable with up to 32 input or 32 output channels for PC and Macintosh systems. With MIDIMATE eX you can obtain perfect MIDI timing and performance at an extremly affordable price.

MIDIMATE eX is a simple, stylish and very powerful adapter cable that connects the USB port of your computer to any MIDI Input or MIDI Output labelled connector on an external MIDI device. Two MIDI connectors are provided by MIDIMATE eX and using them with your applications could not be easier. If you connect the MIDI cable to a MIDI Output of an external device, signals will appear via MIDI input in your software. If you connect it to a MIDI Input, you can send signals to the external device via the MIDI playback function of your software. All these functions are provided with perfect MIDI timing and best performance.

Features/specifications

USB MIDI interface with 2 MIDI connectors, each can work as independent input or output
high-speed connection optimized for USB 3.0 and 2.0 port of PC or Mac, downwards compatible to USB 1.1
bus powered, requires no external power supply
no driver needed for Windows XP, Windows Vista, Windows 7, Windows 8.1, Windows 10, Windows 11 and Mac OS X (32 and 64 bit)
optional ESI MIDI Port driver for multi device / multi client operation under Windows available

Notes: MoCo is a fully passive monitor controller that helps you to provide perfect control over the playback volume of your studio monitors.

"Fully passive" means that there are no active components involved, that could in any way alter the audio signal - keeping the maximum sound quality level for your studio monitors. MoCo provides two separate stereo inputs (one with balanced 1/4" TRS connectors, one with both unbalanced RCA and unbalanced 1/8" TRS connectors) and two separate stereo outputs (one with balanced XLR connectors, one with balanced / unbalanced 1/4" TRS plus unbalanced 1/8" TRS connectors). MoCo does not change your signals from unbalanced to balanced: what goes in, goes out!

Via one switch you can select the input signal and with separate buttons, each output can be enabled. Also there is a switch that changes the monitor signal to mono and you can mute the playback audio signal quickly at the touch of a button. A quick swap of the left and right audio signal channels is also possible. And of course, the stylish big knob in the center of MoCo controls the actual playback volume.

Features/specifications

2x mono balanced 1/4" TRS input (input A)
2x mono unbalanced RCA input (input B)
1x stereo unbalanced 1/8" mini jack input (input B)
2x mono balanced XLR output (output A)
2x mono balanced / unbalanced 1/4" TRS output (output B)
1x stereo unbalanced 1/8" mini jack output (output B)
Selected high quality potentiometer for passive volume control
A/B input selection switch
L/R switch to swap left & right audio channels
Independent A and B buttons to enable and disable the outputs
Mono downmix button (mixes left to right channel and right to left channel)
Mute button to mute output signal instantly
Approx. dimensions: 164 mm (length), 130 mm (width), 55 mm (height)

Notes: Great value here. ESI's compact reference monitors offer solid bass response all the way down to 44 Hz, clear mids and high frequencies, plus the versatility of digital signal processing.

Supplier's Notes:
Building on the legacy of ESI's renowned nEar studio monitors and upgrading the popular aktiv 05, the nEar i5 near field reference monitor sets a new standard for entry-level users seeking professional-level 5" near field monitoring speakers.

This DSP-based Class-D studio monitor features an ultra-flat low frequency response, a newly designed silk dome tweeter (40W powered), and a special 5" woofer (50W powered) made from selected sustainable sturdy paper fibers. These components deliver an unparalleled punch in the low-mid frequency range, offering a response unheard of in this class.

The unique Character selection switch provides a smooth Mix & Listen setting or a precise Reference sound.

The nEar i series is yet another milestone in the ESI studio monitor legacy.

Notes: Building on the legacy of ESI's renowned nEar studio monitors, the nEar i7 near field reference monitor sets a new standard for entry-level users seeking professional-level 6.5" near field monitoring speakers.

This DSP-based Class-D studio monitor features an ultra-flat low frequency response, a newly designed silk dome tweeter (40W powered), and a special 6.5" woofer (50W powered) made from selected sustainable sturdy paper fibers. These components deliver an unparalleled punch in the low-mid frequency range, offering a response unheard of in this class.

The unique Character selection switch provides a smooth Mix & Listen setting or a precise Reference sound.

The nEar i series is yet another milestone in the ESI studio monitor legacy.

Notes: Building on the legacy of ESI's renowned nEar studio monitors and upgrading the aktiv 08, the nEar i8 near field reference monitor sets a new standard for entry-level users seeking professional-level 8" near field monitoring speakers.

This DSP-based Class-D studio monitor features an ultra-flat low frequency response, a newly designed silk dome tweeter (55W powered), and a special 8" woofer (65W powered) made from selected sustainable sturdy paper fibers. These components deliver an unparalleled punch in the low-mid frequency range, offering a response unheard of in this class.

The unique Character selection switch provides a smooth Mix & Listen setting or a precise Reference sound.

The nEar i series is yet another milestone in the ESI studio monitor legacy.

Notes: Unleash your creativity!

Whether you're about to stream your story, build your beat, track, or do anything beyond that - with Neva Duo you're ready to go instantly and as easy as never before.

Coming at a super affordable price, Neva Duo offers superior audio quality, elegant design and an extensive software package while retaining a compact form. Equipped with professional pre-amplified microphone and guitar inputs as well as two line inputs, it offers everything you need to get started right away. The USB-C port makes it easy to connect to your computer or mobile device. Neva Duo comes with professional ASIO drivers including DirectWIRE loopback function and more, so you can focus on your creativity.

Features
2 input / 2 output 24-bit / 192kHz USB 3.1 audio interface with USB-C connector
2x XLR microphone preamp with +48V phantom power support
2x Hi-Z inputs with 1/4" connector
USB bus powered (no additional power adapter needed)
Line output with balanced/unbalanced 1/4" TRS connectors
Headphone output with 1/4" Stereo connector and separate volume control
ADC with 97dB(a) dynamic range
DAC with 107dB(a) dynamic range
Zero latency hardware direct input monitoring activated by switch
Master output volume control
Supports Windows 10, Windows 11 with ASIO 2.0, MME, WDM and DirectSound
Supports macOS via the native CoreAudio USB audio driver from Apple
Stereo hardware loopback channel for internal recording
Includes Bitwig Studio 8-Track DAW
Includes Steinberg WaveLab LE audio editor license
Works with Cubasis LE from Steinberg for iPhone / iPad
Includes 3 month (up to 9000 minute) subscription to JackTrip Virtual Studio
Dimensions: 13cm x 9cm x 4cm

Connectors & Functions

LINE HI-Z SWITCH 1 for input 1 to switch between Line / Microphone signals and Hi-Z guitar signals.

LINE HI-Z SWITCH 2 for input 2 to switch between Line / Microphone signals and Hi-Z guitar signals.

+48V PHANTOM POWER SWITCH to provide power for condenser microphones.

DIRECT MONITORING SWITCH to enable or disable input monitoring to listen to the input signals.

GAIN KNOB 1 to change the input gain / input level for input 1. The LED ring indicates the signal level.

GAIN KNOB 2 to change the input gain / input level for input 2. The LED ring indicates the signal level.

HEADPHONE VOLUME KNOB to change the output volume for connected headphones.

MASTER VOLUME KNOB to control the master output volume of the main line output signal.

XLR / TRS COMBO INPUT 1 to connect a microphone via XLR cable, a line signal via 1/4" TRS connector or an electric guitar with 1/4".

XLR / TRS COMBO INPUT 2 to connect a microphone via XLR cable, a line signal via 1/4" TRS connector or an electric guitar with 1/4".

HEADPHONE OUTPUT to connect headphones.

OUTPUT LINE 1/2 to connect the stereo master line level output signal via 1/4" TRS cables for left and right channels.

USB-C CONNECTOR to connect the audio interface to a PC, Mac, tablet or mobile phone.

Small, flexible and ideal for entering the world of digital audio recording

This stylish 24-bit / 192 kHz USB-C audio interface is so small, it will instantly become your new companion on the go and in your studio. Neva Duo is USB bus powered and Plug & Play, just plug it in and start working! It works with any modern Mac (Intel or M1 CPU or better), PC (Windows 10 and higher) and with many portable devices (iPhone, iPad, etc.). No additional AC adapter is needed. You can use the integrated 2 preamps with 48V phantom power for condenser or dynamic microphones with up to 50dB gain using XLR inputs or connect an electric guitars via 1/4" Hi-Z inputs. On the output side, there is an integrated headphone amplifier and there are stereo TRS outputs with master volume control allowing you to connect a mixer, amplifier or active speakers. You can monitor incoming audio signals with zero latency, just push the direct monitor button. The total of 2 inputs with 97dB(a) dynamic range and 2 outputs with 107dB(a) dynamic range can be used for line level signals as well.

Neva Duo is compatible with virtually all common audio software thanks to ESI's professional low latency ASIO 2.0 driver for Windows and CoreAudio compatibility on the Mac. There is even a DirectWIRE hardware loopback function that allows you to route and mix different sound sources internally: perfect for podcasting or live streaming applications.

All this turns Neva Duo into an ideal device to get started in the world of digital audio recording, no matter if you create your own music, if you want to mix and edit audio, if you work on your podcast or even for live streaming. And yet there is more: Bitwig Studio 8-Track and Steinberg WaveLab LE are included. On the iPhone and iPad, you can use Cubasis LE from Steinberg.

An alternative to Neva Duo is ESI's even more compact Neva Uno with one microphone preamp.

Notes: Whether you're about to become a content streamer or beat maker or anything beyond - with Neva Uno you're ready to go instantly.

Coming at a super affordable price, Neva Uno offers superior audio quality, elegant design and an extensive software package while retaining a compact form. Equipped with professional pre-amplified microphone and guitar inputs as well as two line inputs, it offers everything you need to get started right away. The USB-C port makes it easy to connect to your computer or mobile device. Neva Uno comes with professional ASIO drivers including DirectWIRE loopback function and more, so you can focus on your creativity.

Features

2 input / 2 output 24-bit / 192kHz USB 3.1 audio interface with USB-C connector
XLR combo microphone preamp with +48V phantom power support
Hi-Z instrument input with 1/4" connector
USB bus powered (no additional power adapter needed)
line output with unbalanced RCA connectors
headphone output with 1/4" connector
ADC with 97dB(a) dynamic range
DAC with 107dB(a) dynamic range
Zero latency hardware direct input monitoring activated by switch
Master output volume control
Supports Windows 10, Windows 11 with ASIO 2.0, MME, WDM and DirectSound
Supports macOS via the native CoreAudio USB audio driver from Apple
Stereo hardware loopback channel for internal recording
Includes Bitwig Studio 8-Track DAW
Includes Steinberg WaveLab LE audio editor license
Works with Cubasis LE from Steinberg for iPhone / iPad
Includes 3 month (up to 9000 minute) subscription to JackTrip Virtual Studio
Dimensions: 10.5cm x 9cm x 4cm


Connectors & Functions

+48V PHANTOM POWER SWITCH to provide power for a condenser microphone.

LINE HI-Z SWITCH for input 2 to switch between Line level and Hi-Z guitar signals.

DIRECT MONITORING SWITCH to enable or disable input monitoring to listen to the input signals.

GAIN KNOB 1 to change the input gain / input level for input 1. The LED ring indicates the signal level.

GAIN KNOB 2 to change the gain / input level for input 2. The LED ring indicates the signal level.

VOLUME KNOB to change the main output volume for connected headphones and speakers.

XLR / TRS COMBO INPUT 1 to connect a microphone via XLR cable or a line signal via 1/4" TRS connector.

TRS INPUT 2 to connect a line via 1/4" TS connector.

HEADPHONE OUTPUT to connect headphones.

LINE OUTPUT 1/2 to connect the stereo master line level output signal via RCA cables for left and right channels.

USB-C CONNECTOR to connect the audio interface to a PC, Mac, tablet or mobile phone.

Small, portable and perfect for your podcasting or live streaming applications

This stylish 24-bit / 192 kHz USB-C audio interface is so small, it will instantly become your new companion on the go and in your studio. Neva Uno is USB bus powered and Plug & Play, just plug it in and start working! It works with any modern Mac (Intel or M1 CPU or better), PC (Windows 10 and higher) and with many portable devices (iPhone, iPad, etc.). One XLR/jack combo input will take either your microphone or line signal, while the second 1/4" jack input accepts line or Hi-Z guitar signals. The inputs feature a mic preamp with up to 50dB gain and 48V phantom power support and the analog-to-digital converter provides 97db(a) dynamic range. On the output side, there is an integrated headphone amplifier and stereo line RCA outputs with a digital-to-analog converter with 107dB(a) dynamic range, allowing you to connect a mixer, amplifier or active speakers. You can monitor incoming audio signals with zero latency, just push the direct monitor button.

Neva Uno is compatible with virtually all common audio software thanks to the professional low latency ASIO 2.0 driver for Windows and CoreAudio compatibility on the Mac. There is even a DirectWIRE hardware loopback function that allows you to route and mix different sound sources internally: perfect for podcasting or live streaming applications.

All this turns Neva Uno into an ideal device to get started in the world of digital audio recording, no matter if you create your own music, if you want to mix and edit audio, if you work on your podcast or even for live streaming. And yet there is more: Bitwig Studio 8-Track and Steinberg WaveLab LE are included. On the iPhone and iPad, you can use Cubasis LE from Steinberg.

An alternative to Neva Uno is ESI's larger model Neva Duo with two microphone preamps.

Notes: ***B-STOCK: Box opened, product in perfect working order***


U24 XL continues our tradition to offer extremely small and portable audio devices with excellent high quality. With the legacy of our famous Waveterminal U24 in mind, U24 XL has been released just in time for the 10th anniversary of ESI product sales.

U24 XL is not only stylish, it is with dimensions of around 10 cm x 9 cm a device that can go with you anywhere. Offering total flexibility of an external USB device and pure digital quality, coupled with true high quality 24-bit support on the 2 analog input and 2 analog output channels provided via TRS connectors, U24 XL will easily qualify as the most useful device in your studio, wherever that may be. Even better, U24 XL also provides digital S/PDIF connections in both optical and coaxial format.

If you're looking for a really powerful USB audio device that is small and that gives you maximum performance under Mac OS X as well as under any current Windows environment including Windows Vista, 7, 8, 10, then U24 XL is for you.

Features
2 x analog input and 2 analog output channels (1/4" TRS connectors)
one output connector usable as headphone output
S/PDIF digital in and out available via optical (Toslink) and coaxial (RCA) connectors
24 Bit AD/DA converter
realtime input monitoring for incoming signals
drivers for Windows 10/8.1/8/7/Vista/XP with ASIO 2.0 support with low latency
Core Audio support under Mac OS X 10.4 and higher
dimensions: around 10 cm x 9 cm

Notes: The uniK 05+ is the result of extensive development work performed in Germany, defining a new quality level in its class. With its new 5" kevlar low frequency driver and a new custom engineered and powerful high frequency magnetostatic tweeter, the uniK 05+ offers many improvements over our successful uniK 05 and will easily become an important part of your studio setup with its clear and strong sound image.

What makes uniK 05+ unique?

The uniK 05+ studio monitor offers true full range quality with extended low end in a small case and an entirely new signal processing and amplifier unit with a perfect order low-z and low noise design. Mos-Fet Bi-amplification ensures a high slew-rate and fast setting, featuring true analog vintage sound processing with LC-like gyrator technology for a stressless and silky sound.

A completely new feature is the unique one knob sound character adjustment from smooth to bright, allowing you to change parameters for every room and preference. The additional high resolution High and Low switches add additional control. And of course the uniK 05+ studio monitor features a real precision gain attenuator, instead of a simple volume control.

The new design of the crossover ensures an excellent phase response and safe power limitation, driving the woofer and tweeter in phase for optimal step response. The tweeter features a newly upgraded magnetostatic design with extremely low moving mass for extended frequency and fast transient response and high sound resolution. The matching woofer consists of a kevlar composite cone with high stiffness ensuring better piston motion and excellent low-end sound reproduction.

Another new feature is the flexible rubber feet with discrete height adjustment. They are not only helpful to reduce unwanted vibrations, but also allow you to tilt the speaker towards the precise listening point - a great feature for typical near field applications.

Other new special features that are not standard in this class are standby to save power consumption (can be disabled) and a ground lift switch.

And with it's copper color woofer cone and the high quality matte cabinet finish, it looks quite uniK, too!

ROOM ADJUSTMENTS

SIDE - TILT UP

SIDE - TILT DOWN


Features
Biamp 2-Way Powered Speaker System
Active Studio Monitor Speaker
HF Driver: extremely low mass magnetostactic tweeter F49 x 26 mm
LF Driver: 5" kevlar curved cone (magnetic shielding type)
Output Power: 80W (HF: 40W, LF: 40W), 110W AC consumption power
Frequency Response: 49Hz - 25kHz
Input Impedance: 27.2kOhm (balanced) / 13.6kOhm (unbalanced)
Crossover Point: 3.2kHz
SPL: 101dB, Peak 104dB
Input Connectors: XLR / TRS 1/4" combo connector, balanced / unbalanced
Gain Control: -14 .. 0dB .. +14
Room Adjustments Control: Character: -6 .. 0dB .. +6; Low: -5 .. 0dB .. +5; High: -5 .. 0dB .. +5
Rear Bass-Reflex ventilation, optimized for near field application
Ground lift switch
Standby function, can be turned on and off
Indicator: multi color LED on front panel, power on orange, standby red
Feet: 4 pieces rubberized, adjustable height separately
Working Voltage: AC100-240V 50/60Hz
Dimensions (W x H x D): 190 x 265 x 210mm
Weight: 4.4 kg

Notes: Simple, solid performance is the order of the day with this MIDI controller from ESI. 16 pads, six rotary encoders and plug-and-play USB compatibility all housed in a classy aluminium unit.

Supplier's Notes:
Developed for Beat Makers, Finger Drummers and DJs

The Xjam is a small, full-fledged plug-and-play MIDI controller. Due to its solid aluminum chassis, the Xjam is wonderfully portable and ideal for use outside of the studio on mobile devices.

With a 4x4 pad matrix, the 6 endless encoders and the smooth 16 pads, it provides a pleasant and expressive playing experience. In addition, the Xjam offers 48 configurations instead of the usual 16 scenes to save.

Its smooth and ultra-sensitive pads with polyphonic aftertouch are as versatile as the Xjam is in general. The 16 RGB pads also send MIDI CC, MIDI Program Change or MMC messages. There are also 6 high-quality endless encoders on board, which can be used in a variety of ways. In addition to controlling MIDI CC messages, the encoders can be assigned to send pitch, MIDI program change messages or even aftertouch messages. The Xjam comes with a powerful editor software for perfect adaption to your needs. There is also a TRS-MIDI Out socket to send signals to external sound generators.

Connectors & Functions

CTRL BANK let you control up to 18 independent parameters
360- ENCODER knobs to send continuous controller messages to your software or external MIDI device
SCENE BANK let you access up to 48 different scenes
PAD BANK let you access up to 48 different pads
PADS polyphonic aftertouch and velocity
USB-C port connects to the computer or mobile device and used to send and receive MIDI data
MIDI OUT for connection and transmission of MIDI data to an external device
FOOT SWITCH input for sustain pedal
EDIT each pad and encoder can be edited independently
SETUP adjust the global settings and the repeat parameters
TYPE allows to choose from different types (MIDI CC, PITCH, PROGRAM, AFTERTOUCH)
REPEAT with two different modes available, temporary and static

Portable

Great for the road & any mobile applications or where space constraints are an issue. Play drums & control effects with the Xjam. Everything's right there for building any style of track, anywhere you feel the inspiration.

Great For Live Shows

The velocity & pressure-sensitive pads are great for playing virtual instruments live onstage. Plus, the pads offer aftertouch that adds a whole different level of expression & control for that extra element to live or studio performance.

Bundled Software

In order to get you started right out of the box, Xjam ships with a powerful software package for professional recording, creation of your own songs, mixing of any audio content and much more. The following applications are currently included:

Bitwig 8-Track

Bitwig Studio 8-Track - the trim and effective DAW to start producing, performing, and designing sounds like a pro for use on up to eight tracks of audio / MIDI, incl. the Bitwig Essentials Package, a versatile selection of handpicked presets and sounds. Record instruments, create your arrangements, design new sounds, or just jam - every feature has been developed by musicians, for musicians!

Steinberg Cubasis LE

Cubasis LE is the compact version of Steinberg's mobile multitouch sequencer, providing the same look and feel of its bigger brother Cubasis. Specially designed for quick and easy operation, Cubasis LE makes recording, editing and mixing a breeze, no matter where you are, right there on an iPhone or iPad when connecting Xjam.

Steinberg WaveLab LE

Whether you are a hobby musician, home studio owner, freelancer or podcaster - WaveLab LE helps you to bring your music, voice and sound recordings to a more professional level. This easy-to-use mastering and audio editing software from Steinberg turns your computer with Xjam into an audio analysing, editing and publishing studio.

Specifications

MIDI Pad controller
6 velocity-sensitive pads
3 colour pad indicators for velocity and edit/setup operation
6 MIDI encoder knobs, all programmable
Sustain pedal input
48 user-programmable scene presets, available for instant recall
Sends and receives MIDI data
Bus powered: needs no batteries or AC adapter
Size: 200mm (7.87 in) x 135mm (5,3 in) x 23mm (0.59 in)
Weight: 371g (0,8 lb)
3.5mm TRS jack to female 5-pin DIN MIDI cable available separately

Notes: The ultimate MIDI keyboard

Meet Xkey - the ultimate mobile MIDI keyboard, able to go wherever the music takes you. Featuring an ultra-slim lightweight design, Xkey is made for creation wherever inspiration strikes you. From the studio to your living room and everywhere in between, this keyboard brings professional performance anywhere. Simply plug Xkey into your device and play along with the best apps and recording software. Xkey is a fully class compliant, USB MIDI controller that works with all MIDI apps on virtually all platforms.

Connectors & Functions

The Xcable connects to the left side of Xkey 37. It provides a MIDI output with 5-pin DIN connector and two 1/4" connectors for SUSTAIN and EXPRESSION pedals.

The OCTAVE+ and OCTAVE- buttons allow you to move the octave range up or down

The pressure sensitive MODULATION button sends MIDI modulation controller data

The pressure sensitive PITCH BEND+ and PITCH BEND- buttons allow you to pitch the sound up or down via MIDI pitch bend data

The SUSTAIN button allows you to enable or disable the MIDI sustain functionality

FULL SIZE KEYS - 37 full-sized fully velocity sensitive keys with polyphonic aftertouch

USB-C port connects to the computer or mobile device and used to send MIDI data

Unlimited possibilities with all MIDI apps

Compatible with any MIDI application and featuring a professional, ultra-thin 37-key design with polyphonic aftertouch, the Xkey is the ideal tool for musicians who demand precision and portability. Whether for Mac, PC or mobile devices, the Xkey gives you everything you need to control your music software and devices. Unleash your creativity wherever you go!

Full Size Keys

Xkey comes with 37 full size, velocity sensitive keys that follow exactly the width of traditional piano keys.

Portable

The ultra-slim lightweight design of Xkey makes it easy to travel with. It fits into your luggage or backpack, so you can play on-the-go.

Aluminium Body

Robust, high quality construction: the ultra thin stylized anodized aluminium body gives Xkey a solid and stylish design.

Velocity Sensitive

The velocity sensitive keys make it possible to play Xkey with the same expression as a professional stage piano.

Xcable Adapter

The included Xcable adapter adds a 5-pin DIN MIDI output and 1/4" connectors for Expression and Sustain pedals.

USB and Standard MIDI

Xkey works with standard MIDI data making it compatible with all MIDI compatible apps on Mac, PC and mobile devices.

Polyphonic Aftertouch

Your pressure on the keys can control the sound effects individually - a professional studio standard feature.

Smart Buttons

Durable rubber smart buttons provide features like Pitch Bend, Modulation, Sustain and allow changing of the Octave range.

Studio Ready

Simply plug & play with all common operating systems: macOS, Windows, iPhoneOS, iPadOS, Linux, Android.

Bundled Software

In order to get you started right out of the box, Xkey 37 ships with a powerful software package for professional recording, creation of your own songs, mixing of any audio content and much more. The following applications are currently included:

Bitwig Studio 8-Track - the trim and effective DAW to start producing, performing, and designing sounds like a pro for use on up to eight tracks of audio / MIDI, incl. the Bitwig Essentials Package, a versatile selection of handpicked presets and sounds. Record instruments, create your arrangements, design new sounds, or just jam - every feature has been developed by musicians, for musicians!

Cubasis LE is the compact version of Steinberg's mobile multitouch sequencer, providing the same look and feel of its bigger brother Cubasis. Specially designed for quick and easy operation, Cubasis LE makes recording, editing and mixing a breeze, no matter where you are, right there on an iPhone or iPad when connecting Xkey 37.

Whether you are a hobby musician, home studio owner, freelancer or podcaster - WaveLab LE helps you to bring your music, voice and sound recordings to a more professional level. This easy-to-use mastering and audio editing software from Steinberg turns your computer with Xkey 37 into an audio analysing, editing and publishing studio.

Notes: ***B-STOCK: Box opened, product in perfect working order***


Meet Xkey Air - the ultimate mobile MIDI keyboard, able to go wherever the music takes you. Featuring an ultra-slim lightweight design, Xkey Air is made for creation wherever inspiration strikes you. From the studio to your living room and everywhere in between, this keyboard brings professional performance anywhere. Simply link Xkey Air to your device and
play along with the best apps and recording software. Xkey Air is a fully class compliant, USB and Bluetooth MIDI controller that works with all MIDI apps on virtually all platforms.

Notes: The ultimate MIDI keyboard

Meet Xkey Air - the ultimate mobile MIDI keyboard, able to go wherever the music takes you. Featuring an ultra-slim lightweight design, Xkey Air is made for creation wherever inspiration strikes you. From the studio to your living room and everywhere in between, this keyboard brings professional performance anywhere. Simply plug Xkey Air into your device and play along with the best apps and recording software - or connect it via Bluetooth to your devices for low latency fully wireless data transmission. That's true freedom!. Xkey Air is a fully class compliant, USB and Bluetooth MIDI controller that works with all MIDI apps on virtually all platforms.

Unlimited possibilities with all MIDI apps

Compatible with any MIDI application and featuring a professional, ultra-thin 37-key design with polyphonic aftertouch, the Xkey is the ideal tool for musicians who demand precision and portability. Whether for Mac, PC or mobile devices, the Xkey gives you everything you need to control your music software and devices. Unleash your creativity wherever you go!

Full Size Keys

Xkey Air comes with 37 full size, velocity sensitive keys that follow exactly the width of traditional piano keys.

Portable

The ultra-slim lightweight design of Xkey Air makes it easy to travel with. It fits into your luggage or backpack, so you can play on-the-go.

Aluminum Body

Robust, high quality construction: the ultra thin stylized anodized aluminum body gives Xkey Air a solid and stylish design.

Veloctity Sensitive

The velocity sensitive keys make it possible to play Xkey Air with the same expression as a professional stage piano.

Xcable Adapter as option

The optional Xcable adapter adds a 5-pin DIN MIDI output and 1/4" connectors for Expression and Sustain pedals.

USB, BLE and Standard MIDI

Xkey Air works with standard MIDI data making it compatible with all MIDI compatible apps on Mac, PC and mobile devices.

Polyphonic Aftertouch

Your pressure on the keys can control the sound effects individually - a professional studio standard feature.

Smart Buttons

Durable rubber smart buttons provide features like Pitch Bend, Modulation, Sustain and allow changing of the Octave range.

Studio Ready

Simply plug & play with all common operating systems: macOS, Windows, iPhoneOS, iPadOS, Linux, Android.