搜索结果

Notes: Eurorack version of 1010's superb Bluebox. Vast power in 30 HP, with the ability to mix, record and play back in mono and stereo, hook up to a computer over USB for stereo I/O and run effects, all with CV control.

Supplier's Notes:
The bluebox Eurorack edition is the new Eurorack mixer with effects and multichannel recording/playback based on the award-winning bluebox desktop mixer. With the Eurorack edition's USB-C EXT port, you can send 2 channels of audio to and from your computer. Plus, you can control up to 6 mix settings with the 6 CV inputs. Whether recording your Eurorack jams, using it to play stems as backing tracks, or a combination of both - bluebox Eurorack edition will rock your rack!

Connect your eurorack, sampler, drum machine, and synthesizer outputs to 12 mono, 3.5 mm inputs and map them to 12 mono tracks or 6 stereo tracks - all with independent control for recording and playback. Connect your computer to the USB C port to send and receive two channels of audio.

The bluebox Eurorack edition is the ultimate in compact mixing, effects, recording, and playback for Eurorack. Smack it in your rack and hit the road with a self-contained, electronic music powerhouse!

When you purchase a bluebox Eurorack edition, you will receive:

a bluebox Eurorack edition 30 HP Eurorack module
A microSD card with bluebox firmware and pre-loaded project files
two Eurorack power cables
a bluebox Eurorack edition Quick Start guide
two MIDI Adapters

Technical Specs

Dimensions & Power
30 HP
Module dimensions including knobs: 6" x 5"x 1.6"
Depth behind front panel with ribbon cable: 1.0"
Requires the +5V rail which may not be present
on some older racks.
Uses 500-850mA at +5V (depending
on screen brightness), 320 mA at +12V, and 82mA at -12V
Requires two power connections
Capabilities
12 mono tracks, 6 stereo tracks or something in between
Connect to TRS or USB C MIDI for beat syncing effects
Lots of headroom with support for Eurorack levels up to +/-5V inputs and outputs
3 effects: reverb, delay and compressor
Records and plays back 48k, 24-bit audio WAV files
4 band EQ per track
Durable aluminum faceplate
Stream 2 channels of audio in and out over USB C

Inputs and Outputs
12 mono 3.5 mm TS inputs
2 independently controlled 3.5 mm TS output pairs that can be used as 4 mono outputs
1 stereo 3.5 mm headphone output
6 CV Inputs
1 USB C MIDI Device port
1 TRS MIDI Input
1 TRS MIDI Output
1 USB C Ext jack for streaming audio
3.5" touch screen, 4 knobs, 8 navigation buttons and 3 transport buttons

Notes: The Tiptop Audio Buchla Model 296t is a 16 band spectral resonator & vocoder based on the original Buchla 296.

The 296 was first introduced in 1978 and very few were ever made. Making a module of such complexity at a time when electronic schematics were drawn with pencils, with 48 filters that were most likely hand-calculated is just incredible.

The 70's were a great era of exploration and proof of audio electronics scientific theories, but for Don Buchla it seems like it was always something beyond theory.

The 296 might at first look like an equalizer, but Don Buchla had totally different ideas for it. He managed to pack into it a 16-band analogue modular spectral processor, a cross-band vocoder, plus a massive amount of patch points to work with his synthesizer system.

Notes: A mini-modular synthesizer for real-time composing, sound processing, and having fun.

Pluto is compact and portable, with abilities that belie its small size. Five channels of modulation (named for the five moons of Pluto), two voices, two sequencers, a mini-keyboard, and onboard delay make Pluto its own complete sound environment, but it can happily play with all your other gear.

The design of Pluto draws from a legacy of portable electronic instruments, from the Buchla Music Easel to 80's Casio synthesizers. With a focused, approachable interface, Pluto invites exploration.

Features

Portable 2-voice, 2-sequencer patchable synthesizer
Easily create complex, randomized sequences
Low-aliasing digital oscillators, wavetable oscillators
Rechargeable battery
Built-in delay and reverb effects
Mini touch keyboard
Audio input for audio processing
Audio output (stereo headphone, line)
Quantize to preset scales, MIDI, or even audio input
Eurorack-compatible patch signals (5v)
Sync In & Out
MIDI In & Out (TRS, USB)
2 channels CV Out (0-5v, 1v/oct)
USB-C cable included

Notes: Meris describe the MercuryX as the most flexible studio reverb pedal ever made. A bold claim, but hear them out. Immense power with eight custom algorithms in a modular architecture. Full stereo with a wealth of programs from lush plates and twangy springs to experimental weirdness.

Supplier's Notes:
The Meris MercuryX takes the heart and soul of Mercury7 and expands it far beyond sci-fi into the highest quality and most flexible studio reverb ever created in a pedal format. Its modular reverb system format breaks the paradigm of pre-set reverb types and inspires new discoveries. MercuryX features the same easy to use UI as LVX, making it immediately intuitive to navigate.

All of Meris' passion for pro audio has made it into both the algorithms and hardware performance of this pedal. MercuryX combines 8 custom Meris reverb algorithms and incorporates those into a modular system architecture that first introduced with the award winning LVX pedal. It features discrete processing elements and control signal modifiers that can be connected as desired for infinite flexibility in crafting custom reverbs.

Here is a deep dive into the 8 different reverb structures in MercuryX. Each Reverb Structure has Gate controls that can be used to dial in a range of gated reverb effects including the classic percussive gate sound, reverse tail reverb sounds, and slow breathing textures.

Similar to the Dry Blend control of the Predelay, each Reverb Structure features a Predelay Blend control that allows you to put some or all of the predelay reflections in parallel with the reverb tank.

Ultraplate - Adapted from Mercury7, Ultraplate is an inspiring and lush plate with a fast build. Use the Ultraplate's flexible decay range to create a wide range of studio textures.

Cathedra - Adapted from Mercury7, Cathedra is a massive and ethereal algorithm with a slow build. Cathedra is perfect for scifi textures and recreating C-beams glittering in the dark near the Tannhauser gate.

Spring - A flexible algorithm that can be voiced to replicate both the amp based reverb sounds and the classic studio spring tanks featured on early recordings.

78 Room - A lively and direct sound. This algorithm is great for transforming static sounding virtual amps into the difficult to capture sound of a great amp live in the room with you. The Room algorithm features a unique infinite mode (Maxed out Decay controls) that interacts with the Tank Mod to provide deep chorused and flanged reflections.

78 Plate - Fast and dense, the 78 Plate algorithm is a good match for beefing up percussion and vocals.

78 Hall - A large hall with a medium build up of reflections. Great for building up ambient walls of sound. The Hall algorithm's extended reflections are a great base for sculpting with the Bass/Mids/Cross controls. Deep rumbling bass caverns and ethereal upper mid emphasized halos of sound are easy to create. Explore the additional sparse mode for the Hall when Diffusion is set Low.

Prism - The Prism Strucure is an dual tank that allows you to build your own geometric rooms by specificying the size and distance and reflectivity. Prism features a highly configurable modulation section which allows different modulation phases per side to further increase the stereo image.

Gravity - The Gravity Structure works by accelerating indivual windows of your signal and stretching them across the horizon.

Notes: Keyboard version of Akai's iconic MPC workstation, combining the classic MPC sampling and sequencing approach with 16 pads and a 37-note synth keybed. A superb all-rounder for any production style.

*** Introducing MPC Stems- March 2024 ***

Akai Professional now introduces the next chapter of sampling innovation and production powered by the groundbreaking MPC Stems bringing sampling into a new chapter.

With MPC Stems, you can access the raw building blocks of any sample or vinyl record, isolating the DNA of any record. Producers can now manipulate the Drums, Bass, Music, and Vocals, opening new creative possibilities.

Akai Professional introduces the ultimate creative workflow with Stems Separation seamlessly integrated into the leading MPC series, powered by MPC 2 Desktop Software.

With MPC Stems, producers and beat-makers can now unlock unmatched sampling creativity by easily isolating drums, bass, music, and vocals from any audio, vinyl recording, or sample revolutionizing the art of sampling.
Experience lightning-fast workflow with superior sound quality, keeping you inspired throughout the creative process.

Slice and isolate samples while maintaining chop regions across each of the four stem layers.

Take complete control with direct manipulation of stem layers from the pads, adjusting volume, pitch, pan, start, and end points with instant responsiveness.

MPC Stems requires MPC 2 Desktop Software running 2.14 or higher, compatible with MPC Live, MPC Live 2, MPC One, MPC One +, MPC X, MPC XSE, MPC Key 37, MPC Key 61, MPC Studio Mk 2 in Controller Mode.


Supplier's Notes:
Introducing the Akai Professional MPC Key 37; a standalone keyboard workstation that has everything you need to produce music out of the box. The iconic MPC range has been the centrepiece of beatmakers' and producers' studios for over three decades, evolving into a production platform that combines sampling, sequencing and synthesis into a lightning-fast workflow that keeps you focused on your music. MPC Key 37 brings together the familiar 16 pad grid together with a synth-styled 37 note keybed; along with legendary MPC sounds and instruments, and all the connectivity you need to integrate with your outboard gear and computer - in a compact footprint.

Sound

MPC Key 37 ships with a core collection of sounds and samples from Akai MPC's industry standard plug-ins.

There are 8 plug-in instruments out of the box: including Hype, Odyssey, Mellotron and more; and over 10GB of production ready samples and drum kits. Together these offer over 1000 production-ready presets and if you want to dive deeper each plug-in instrument features advanced synthesis, deep parameter editing, and effects for programming in the exact sound you need. With 32GB of internal storage (plus removable media via SD Card and USB) there is enough space to expand your sample and instrument library in whatever direction you need to take it.

Effects

MPC Key 37 includes over 100 powerful studio-quality effects for creative production and mixing.

Insert lush Reverb & Delay effects into your tracks, add bounce and punch to your drums and mix using modern or vintage style compressors and limiters. MPC Key 37 also ships with cutting edge vocal FX plugins which can also be used for straight vocals or creative sound design.

Control surface

The MPC Key 37 features a synth action key-bed with aftertouch, alongside separate pitch and modulation wheels. The synth-style keyboard action has been designed with players and producers in mind; whether tracking basslines into your productions or jamming out synth leads on stage. The 16-velocity sensitive RGB pads are the same award-winning pads as the MPC One+, along with the renowned Time Correct, Swing, and Quantize features of MPC that continue to inspire producers at the top of the industry. Tweaking and editing take place on the 7' multi-touch display and 5 Q-link rotary encoders, giving you fine control as well as quick access to the parameters you need at your fingertips.

Connectivity

MPC Key 37 can also act as a hub for your outboard gear: Connect MIDI devices via USB or using the MIDI DIN In/Out ports; and integrate with modular rigs with the 8 CV/Gate outs. Onboard WiFi/Bluetooth allows for wireless synchronization with Ableton Link and MPC OS Updates, and the SD Card Reader allows for volumes of expandable sounds and tracks.

DAW Integration

MPC Key 37 features a built in 2-in 2-out USB audio/MIDI interface, so you can record audio and MIDI directly in and out of your computer. The included MPC software is a standalone DAW on your Mac or PC, so you get all the tactility and control of the hardware, but with as many tracks as your computer can handle. MPC software also comes as a VST/AU plug-in so you can open it in major DAWs such as FL Studio, Logic, Ableton, Pro Tools, Studio One and more, and combine your favourite workflows.

Notes: One of the most eagerly anticipated new releases in recent years, the T-1 is a powerful 16-track sequencer with countless features aiming to streamline creativity, from melody generation to Euclidean rhythms.

Supplier's Notes:
Not your average sequencer
A 16 track algorithmic sequencer at the center of your studio. The T-1 offers a generative workflow with focus on immediacy and playful exploration. Whether on stage or in the studio, the T-1 will inspire you with fresh ideas and help you push the boundaries of your music. In short, this is a fundamental rethinking of the sequencer as a modern, fun and inspiring instrument

This machine speaks music
Enter a creative dialogue with T-1, and let its musical algorithms spark your creative process, or bring it on stage to perform your musical ideas live and spice them up with variations created on-the-fly

It's your instrument
The T-1 can be customized to suit your music. In fact, it is many instruments in one: Each of the T-1's 16 tracks can be set up in one of three modes.
Note: Compose rhythms and melodies from scratch with creative musical algorithms, and tweak them to your desire with detailed step editing.
CC: Take absolute control over sound design with 16 CC knobs and add automation via random modulation and step editing
FX: Create real-time midi fx to expand and transform your musical ideas. Connect a midi keyboard for hands on live performance

Connect to everything
The signal flow of any modern studio is a complex web of analog, digital and wireless signals and keeping your instruments connected and in sync can be a drain for your creativity. The T-1 solves this by communicating via MIDI, USB, analog CV and gates, Ableton Link and Wi-Fi connections with all of your gear.

Musical structure in a knob
Sculpt the timing, tonality and overall structure of your music in the same intuitive way you would a parameter on a synthesizer: By the twist of a knob. The T-1 lets you dial in any rhythm in a manner of seconds with euclidean rhythms.
Want to surprise your audience and even yourself? Add a bit of random modulation or change the probability of a step being played or not. Try the T-1 style looping random modulator

Tangible visuals
What you see is what you get: at every touch of a knob or push of a button, 16 RGB buttons show you the state of the instrument while offering up a quick way to jump to a new setting in real-time

Performing is composing
The T-1 is an instrument designed to be played in the here and now. Whether you are working in a studio or on stage, the path between musical inspiration and performance has never been shorter.
Make relative parameter changes on one or multiple tracks simultaneously, save the changes or return to the starting point. With the T-1, your music making process is a constantly evolving flow

Technical specifications

Sequencer
Euclidean rhythm generator (w. step editing)
Advanced note repeater / arpeggiator
Melody generator
7 musical scales + 1 user scale per track
Harmonic pitch control
Random modulation on every parameter

Tracks
16 tracks per pattern
16 MIDI channels
Polyphony on every track

Storage
Auto-save
16 patterns per bank
16 banks

User interface
18 endless rotary encoders with push
23 RGB backlit silicone keypads

Physical
Matte black aluminium casing
Dimensions: L:304, W:114, H:39mm ?(11.9", 4.5", 1.5")
Weight: 815g (1.8 lbs)

In the box
1 x T-1
1 x USB cable
1 x MIDI adapter (type A)

Connectivity
USB C (midi/power)
MIDI in / out / thru (TRS type A)
CV & gate i/o
Ableton Link (WiFi)

Notes: A unique analogue mixer from OTO, the Bebe Cherie is a six-channel design with built-in one-knob compressor and 'Bliss' enhancer. Excellent sound quality and a range of creative EQ options.

Supplier's Notes:
Bebe Cherie is a 6 stereo channels analogue mixer with a one-knob compressor and Bliss enhancer on the master bus.

- Full analogue mixer
- 4 channels with variable gain up to +34 dB, asymmetrical soft clipping and a tilt eq
- 2 channels with Baxandall 2 bands eq and a 0/+10 dB selectable input gain
- 3:1 ratio one-knob compressor on the master bus
- Bliss hi frequency enhancer on the master bus
- Unity gain Hi Fidelity phones out. Can be used as a second master output
- Alternate output
- 24 volts internal power supply for pro audio dynamic range
- Rugged Switchcraft- 3.5 mm stereo mini-jack connectors
- Audiophile film capacitors used in the eq circuitry, low noise and low distortion op amp on the audio path, THAT Corporation- VCAs, ALPS- pots

Dimensions : 290 x 145 x 62 mm
Weight : 1338 g

Notes: Oof. Frap casually serve up one of the best filters we've seen in a long time. Quad multimode circuits with saturation and feedback give you extensive routing options. Delicious.

Supplier's Notes:
cunsa /'cu?nsa/ s.f. [dialect of Modena of uncertain etymology, probably from a Latin *comptiare, derived from comptus, participle of comere 'organize,' 'decorate'] i curing, seasoning (of foods), tanning (of leathers).

Seasoning is crucial for cooking. It is a process that enhances the flavors, glues the ingredients together, and even adds some unexpected kick.

From a gentle refining touch to a shovelful of spice, CUNSA is the perfect seasoning tool for your patches. It can sweeten a sour lead or beef up an insipid bass line, and anything in between.

And, just like a good oil, you can even taste it by itself!

CUNSA is a quadruple analog pingable multimode resonant filter, saturator, mixer, and oscillator.

It is Frap Tools' sound seasoning tool: it can gently even a patch, applying a final touch, or it can set it on fire with a ridiculous amount of spice. It's up to you and your cooking style!

It consists of four multimode resonant filters with a custom saturation and feedback control that you can use independently or in various combinations and roles thanks to a series of seminormalizations.

Four Analogue Resonant Multimode Filters

CUNSA features four state-variable filters that can be used independently or linked and mixed. Each filter provides three behaviors simultaneously: lowpass, bandpass, and highpass. Each behavior has a 12 dB/oct slope, except for the lowpass, which can be either 12 or 24 dB/oct.

Unique 'Character' Circuit for Feedback and Distortion

CUNSA handles feedback and gain staging with extreme control and versatility. Besides the usual Q control that emphasizes the cutoff frequency, the Character circuit defines the amount of soft clipping when the filter overloads. High clipping guarantees a controlled behavior with fat tone and pure resonance, while low or no clipping lets the signal saturate the filter stages and make it scream.

V/oct Tracking and Quadruple Oscillator

Each filter responds to the V/oct signal with excellent tracking. It is thus possible to move the cutoff frequency along with the main melody or make CUNSA resonate with no input and transform it into a multiple oscillator. The V/oct inputs are seminormalled so you can control more filters with the same CV. Easy chords stabs!

Ping and Ring

CUNSA is ideal for percussive and organic tones. The Ping circuit offers a behavior similar to the BRENSO but AC-coupled. Instead of shooting the frequency to the moon with any trig, CUNSA gently responds to different incoming gates with a selectable decay curve. The Ping circuit can thus create natural decay sounds when fed with trigs or smoother envelopes with any other voltage, like a linear integrator with a custom decay.

Besides this, you can also feed the filter's audio input with trigs and make it ring at high Q settings.

Linked or Individual Filtering

The four filters can work independently or arranged in groups through seminormalled inputs and sum outputs. CUNSA can thus be a 4×1, 2×2, or a massive 1×4 filter. Even odd configurations are possible, like 1+2+1 or 3+1. Mono, stereo, or quadraphonic audio is at your fingertips.

Filter and Combo Behaviour

When the filter behavior is set to COMBINED, every control of the cutoff frequency also affects the input VCA, reducing the signal amplitude and saturation as it approaches the lowest range. It can make organic decays with the ping circuit or tame the low range at high Q and Character settings.

Four Seminormalizations for Group Use

Four inputs have a cascaded seminormalization: audio inputs, VCA CV, V/oct, and Ping. Every signal patched to a filter will thus feed also those at its right, making simultaneous use even simpler. To remove a seminormalization, simply patch a dummy cable to the corresponding input.

Analog Mixing Stage and Group Outputs

Every filter output can be routed to an analogue mix bus that sums the four filters and outputs them in three combinations: all, 1+2, and 3+4. These outputs allow for versatile audio processing. Just like we did with FUMANA, we added a gentle shelving EQ for the higher frequencies of the All output to provide additional timbral variety.

CV Inputs with Attenuators

Besides the seminormalled inputs, every filter features additional CV inputs for cutoff frequency, Q, and Character, each with a dedicated attenuverter.

Notes: Updated version of Korg's excellent Wavestate, drawing on the iconic Wavestation synth to create a modern take on wavetable synthesis, now with added polyphony.

Supplier's Notes:
Wavestate mkII

Extended polyphony. Extended possibilities.

Korg's legendary Wavestation introduced the world to wave sequencing, and the 37-key Wavestate mkII builds on that legacy with a reimagined, compact synth designed to satisfy today's demanding musicians and producers. MkII expands polyphony to 96 stereo voices and adds a fresh look. It's completely compatible with sounds and samples for the original Wavestate.

Overview

Korg's legendary Wavestation introduced the world to Wave Sequencing, transforming raw samples into sounds that no-one had ever heard before. The flagship OASYS, Kronos and Nautilus keyboards developed Wave Sequencing even further, expanding on its unique palette of lush, evolving pads and driving rhythms.

Now, Korg is proud to present the new Wavestate mkII, with improved polyphony (96 stereo voices) and a fresh look. It's completely compatible with sounds and samples for both the original Wavestate, Wavestate SE and Wavestate Native software, including many excellent third-party libraries. Updated sounds and software keep it fresh and the compact form-factor, with 37 full-size keys, still transports easily and fits neatly into any stage, studio, or desktop setup.

Keyboard: 37-keys, velocity sensative
Sound generation: Wave Sequencing 2.0
Polyphony: 96 stereo voices
Configuration: Performance: 4 layers, reverb, EQ
Layers: Program, Arpeggiator, Key, and Velocity Zones
Programs: Wave Sequence, Filter, Amp, Pre FX, Mod FX, Delay
Presets: 261 Performances,799 Programs, and 1042 Wave Sequences
Controllers: MOD wheel, PITCH wheel, Vector Joystick, 8 x program/Performance Mod knobs.
Effects: Pre FX x4, Mod FX x4, Delay x4, Reverb, Performance EQ

Inputs/outputs:

Audio Outputs L/MONO, R (6.3mm TRS phone jack, impedance balanced)
Headphones (6.3mm stereo phone jack)
Damper (6.3mm phone jack)
MIDI in,out
USB Type B

Power: AC adapter (DC12V, 2500mA)
Power consumption 5w
Dimensions: 565 W x 338 (D x 92 (H mm
Weight: 2.9kg

Notes: This long-awaited FM voice module from Jomox is a self-contained synth in Eurorack format, patchable and compatible with other modules but capable of creating eight-voice polyphonic patches all on its own. Vastly powerful.

Supplier's Notes:
The Mod FM is a completely self-contained 8 voice FM synth in eurorack format, which can create powerful sounds out of the box without lacking the commonly provided CV modulation possibilities.

It provides 4 Operators and 2 LFOs/VCOs per voice. Additionally it has 2 analogue filters and analogue VCAs per voice which apply analogue warmth and depth to the Mod FM, although the FM engine is digital of course.

Each voice has own CV/Gate inputs and an individual output. There is a mix output which separates even and odd voices. Here you can mix internal effects like delay and reverb to the stereo output signal.

Next to the CV/Gate control, the Mod FM has Midi in and out in TRS type A format and a USB C connector which handles Midi too.

Even without diving too much into complicated modular setups you can create extremely good sounding and metallic FM sounds, snappy bases but also soft and deep sounding analogue style sounds.

Furthermore, the Mod FM offers a variety of external cv modulations in order to e.g. modulate each operator individually or control the FM envelopes.

The Mod FM is fully multitimbral, i.e. each voice can play an own sound in Multi Mode which gets stored as a complete multi set (not only vectorized). That is, you can copy a single sound to the desired multi, but editings made on that particular multi get stored along with the multi set.

Hence, we have the biggest advantage of the hybrid approach:

Modular is great but can be very complex, and you might be trapped in a system where you never reach again the desired sound of the latest session. Storability certainly helps.

The different sections in more detail:

Matrix FM:

4 operators are arranged in a matrix, in which every operator (= sine oscillator) can be modulated by each one of the other three.

The 16 endless potentiometers of the matrix adjust the modulation amount (FM amt) and the base frequency of the operators.

For each operator you can change the base frequency by the diagonal knobs.

There are several overtone modes that determine if one operator is controlled by the keynote (or CV) = base operator, or if it's locked in as overtone (= overtone operator) to the assigned base operator. For the base operator, the number resembles xxx semitones added to the keynote.

For the overtone operator, the adjusted number is the xxx = Nth overtone or harmonics to the base operator frequency.

The locked overtone operator tracks the base operator and is still able to modulate and being modulated.

Each operator has an ADSR envelope. This envelope can also be used to frequency-modulate the operator.

Algorithm:

The algorithms from the known FM synthesis are actually special cases to the whole matrix.

Because it gets pretty quickly uncontrollable if you turn all the knobs because of the feedbacks, Jomox have decided to implement the algorithms. There are 26 algorithms, that are derived from the DX9 with its 4 operators.

At this menu it's even possible to change the frequency mode of each operator to a fixed frequency that is edited in single Hz and which does not follow the keynote, but only modulation. That makes sense for e.g. percussive sounds.

LFO/VCO:

Each voice has 2 LFOs which can modulate either the frequency (FM) or the amplitude (AM) of an operator. Every LFO addresses 64 different wave forms that are displayed in the right OLED display.

There is another feature: each LFO can be switched into a VCO that covers the whole audio range. You can even mix it into the signal chain and it tracks to the keynote. The former LFO rate parameter turns into a detune parameter. That is, you can create classic sounding rectangle/sawtooth analogue basses or string pads - and much more of course.

Filter:

Each voice contains an analogue filter which is build up with the chip SSI2140 from Sound Semiconductor, which is an improved modern version of the old SSM2040, designed by Dave Rossum, and which had been used in Oberheim synths and the early SCI Prophet-5.

The filter has a classic 24dB output and a 12dB state-variable multimode-filter. The three basic characteristic outputs LP/BP/HP can be cross-faded continuously with one parameter called shape.

Both filter outputs 24dB/12dB can be mixed independently.

The ADSR for the filter is fast and cuts in very quick and directly, the resonance is well adjustable.

The filter section contains an own LFO for the cutoff which is independent from the digital sound engine and has also 64 waveforms.

The VCA is a fast transistor-VCA which is important for snappy sounds. The same transistor-VCA is used in all Jomox drum products. Therefore the ModFM can be used as a rich source for technoid drums and percussions of any kind.

Notes: A seriously classy analogue delay here. MN3005 bucket brigade chips deliver vintage 80s-style warmth and character, with full stereo signal path and MIDI control of modulation, oscillation and tap division.

Supplier's Notes:
Cozy up and immerse yourself in true stereo analogue delay with eight MN3005 bucket brigade chips to create warm, rich repeats capable of 1200ms of delay time with parallel, ping-pong and series delay modes.

Independently control the delay times and modulation of the left and right channels to create syncopated repeats or keep them locked in to the same timing for classic delay sounds.

The Meraki stereo analogue delay uses eight MN3005 bucket brigade chips to create warm, rich repeats.

Capable of 1200ms of delay time with parallel, ping-pong and series delay modes. Independently control the delay times and modulation of the left and right channels to create syncopated repeats or keep them locked into the same timing for classic repeat sounds.

Versatile Delay Modes

Explore parallel, ping-pong, and series delay lines to craft your unique sound. Create syncopated rhythms or classic repeats with independent control over the left and right channels.

Precise Controls

Mix: Dial in the perfect blend of wet and dry signals with the Mix control, offering full wet/dry mix capability.

Feedback Left/Right: Fine-tune the amount of repeats in each channel, from subtle echoes to full oscillation.

Mod Depth/Rate: Add depth to your repeats with adjustable modulation, creating a chorus/vibrato effect in the repeats. Secondary functions allow wave shape and modulation phase adjustments as well.

Time: Tailor your delay time from 80ms to 1200ms, offering a wide range of sonic possibilities.

Tone: Shape the tone of your delay repeats with the Tilt EQ, cutting lows and boosting highs or vice versa.

MIDI Implementation

Digitally manipulate controls like time, modulation, tap tempo, tap division, and more with five-pin MIDI integration.

Tap into Creativity

Tap Division Left/Right Switch: Choose between quarter note, dotted eighth, and eighth note repeats for each channel.

Feedback Mode Switch: Select between Parallel, Ping-Pong, and Series delay lines for diverse rhythmic textures.

Sync/Left/Right Switch: Fine-tune settings independently for each side, unlocking a world of mismatched timings and creative possibilities with fully independent time, divisions, and mod depth/rate/shapes.

Bypass Options

Choose between True-Bypass or Buffered Bypass for trails, and toggle between Trails (default) or Relay (no trails) with the Bypass switch.

Tap Tempo and Expression Control

Take command of your timing with the Tap Tempo switch, or use external tap or an expression pedal for even more dynamic control over time or modulation depth.

Ready for takeoff

Hold the Tap switch to ramp up repeats and send the pedal into self-oscillation. Fun tip: Get extra creative with sound exploration with MIDI control over oscillation and tap division manipulation.

Notes: Make Noise's 208hp 7U 4 Zone CV Bus Case arrives ready to use. Just add modules, patch cables and inspiration. The powder coated metal construction offers excellent mechanical durability. The lid is removable and can be closed with the system fully patched. The sleek matte black finish was selected to match Make Noise's line of Black & Gold modules, and it looks great with just about any module installed. This finish will show the story of your modular synth's travels over the years.

The Make Noise 4 Zone Power Bus Board is a new approach to accommodating the ever-growing universe of Eurorack modules. The multi-zone solution is like having 4 independent bus boards in a convenient single bus board package. Each Zone features isolated +12 VDC and -12VDC supplies and a dedicated ground return path. The +5VDC supply is shared amongst all 4 zones.

The multiple section of the CV Bus was originally designed in 2013 for Alessandro Cortini's personal Make Noise system. It provides visual indication of level, rate and polarity for up to 4 control signals that will be shared throughout a patch. These 4 control signals are colour coded and distributed across the centre of the system allowing for quick, clean and intuitive patching. The distribution method is unlike the typical multiple since the control signals will appear beneath their possible destinations allowing for the use of shorter patch cables. The colour coding and visual indication makes navigating complex patches easier and more intuitive. Typically, the CV Bus would be used to share the most important control signals in a patch such as your Master Clock.

This new version of the CV Bus also includes useful modular utilities:

The Voltage Math is found at the left end of the CV Bus. Like the similar circuit on the 0-Coast, it is a small collection of universally useful modular utilities. The two inputs are summed at the output, one at unity and one adjusted by the input attenuverter. The attenuverted input is also normalled to a DC offset, for purposes of level shifting, voltage mirroring etc. The output strength and polarity is indicated by the Green and Red output LEDs.

A high quality Stereo Line Driver converts powerful modular synthesizer signal levels to the commonly used Line Level. There are mini-jack inputs for Left or Mono, and Right for Stereo sound, a single master volume control, as well as a stereo line output pair, and finally a TRS line/headphone out on a single jack. This output is capable of driving a long cable out to a PA System or a set of Headphones. It is AC coupled with a built-in limiting circuit (with visual indication) that prevents damage to ears and PA system when the patching gets experimental.

Includes

Two 104 hp 3U rows for Eurorack modules, One 104hp 1U row fitted w/ CV Bus
Hybrid switched/linear power solution for low noise and excellent load regulation
Multi-Zone, allowing isolation of noise-prone modules from noise-sensitive ones
Black powder coated metal w/ embossed logo on lid
Sealed to keep dust out during travel or storage
Lid offers space to close w/ your system patched
Recessed side mounted on/off switch and power inlet for safe travel
Locking power connector helps prevent on-stage power loss accidents
Solid carrying handle and rubber feet so the case travels w/ ease
Meets carry-on luggage size requirements for most airlines
Universal AC power adapter works world wide (Need IEC Cable for non-US outlets)
Blued Steel Stand sold separately

Specifications

Size: 7U
Total HP: 208 @ 3U, 104 @ 1U
Outer Dimensions:
22.25" x 14" x 7.25" w/ lid
Max Module Depth: 2.5"
Weight: 12.75 lbs. (w/ powered bus board, CV Bus installed)
Power: +12VDC @ 4A, -12VDC @ 2.4A and +5VDC @ 1A
Connectors: 32
Includes: CV Bus, Powered Bus Board, 120 Sliding M2.5 nuts w/ Black screws, AC Adapter

Notes: A revolutionary keyboard controller that puts the world's best sound library at your fingertips. Get direct, hands-on control of virtual instruments from NI and thousands more from developers like Arturia, Heavyocity, Korg, Output, Spitfire Audio, and u-he.

Browse and tweak everything from synths and drums to orchestral libraries and scoring tools - all seamlessly integrated with Kontrol's tactile controls and large, high-res screen. Then play with a new level of expression and freedom thanks to a best-in-class keybed, polyphonic aftertouch, Light Guide, and Play Assist features. And with a comprehensive package of included software, featuring the industry-leading sampling platform Kontakt 7, you'll be ready to go from day one.

Polyphonic aftertouch

Take expression one step further with the slightest pressure on individual keys. Bring new layers of nuance to your playing with cutoff, pitch, vibrato, and much more, without reaching for an extra encoder or dial. All three models come complete with polyphonic aftertouch on an industry-leading keybed developed in collaboration with Fatar.

Thousands of instruments made real

Kontrol brings the world's best virtual instruments to life in a genuinely immersive experience. Whatever you're playing, get in-depth control thanks to an unparalleled direct connection to Kontakt. Find sounds quickly with intuitive on-screen navigation, then adjust and play them with intelligent auto-mapping that understands the parameters.

Included software

Kontrol comes with a host of creative music production tools - all fully integrated with the hardware, to give you everything you need to start making music straight out of the box.

Included software
Kontakt 7
A free Kontakt instrument of your choice
Komplete 14 Select
Komplete Kontrol Software
Stradivari Cello

An internet connection and a graphics card that supports Direct 3D 11.1 (feature level 11_0) or higher are required to download and activate this product. Once installed and activated, the product can be used offline.

NKS 2 NKS (Native Kontrol Standard) is NI's technical standard for virtual instruments and effects. It's used across the industry and ensures that all compatible plugins are precisely mapped to controls. Kontrol marks the launch of NKS 2, which powers the unmatched software integration experience.

S61 MK3 Dimensions: 967.4 × 323 × 86 mm
Weight: 6kg

Hardware specifications:
1 high-resolution colour screen with glass surface (1280 × 480)
CNC machined, bead blasted and anodized aluminum, 8 × encoder caps, 1 × 4D encoder cap, 2 × wheels (pitch and mod)
RGB illuminated pitch and mod wheels
New button-islands that form a continuous dustproof control surface and are grouped by function

System requirements

MIDI 2.0 compatible
Intel Core i5, Apple M1 (and equivalent or higher)
macOS 13 (Ventura) or higher (compatible with macOS 12 in MIDI 1.0 mode)
Windows 10 (latest service pack) or higher
8 GB RAM

Notes: ENNER is a very expressive sound tool that can generate bits, pads, FX, noises, clicks, glitches, but also function as a cool vocal mic with built-in analogue FX and much more! A musician with a rich imagination and who's experienced in playing ENNER can perform an entire exciting gig using just this synth.

As an instrument, ENNER is a unique analogue synthesizer with the key principle being that all signals that make sound pass through and are managed by your body. Your hands become the central part of the circuitry. Touching different contact pads with different parts of your fingers and palms with different amounts of pressure, letting signals pass through your body defines the mixing, volume, timbre, feedback and other parameters of synthesis. Human skin has much more complex electric properties than we think. The skin provides not just resistance but also some capacitive properties and even nonlinear dependence of conductivity from current, its direction and time during which the current was applied. All of this affects the sound, making you the key part of the synthesis process.

All pots of ENNER are metallic and also function as inputs or outputs. Touching a pot can change not only the parameters but also patch the audio signals.

ENNER consists of:

The array of filters with fixed frequency properties (the triangle in the centre): the stereo high pass filter (HPF), the stereo bandpass filter (high mid - BPFH), the stereo bandpass filter (low mid - BPFL), the stereo lowpass filter (LPF). Stereo means that the filters have separate inputs for left and right channels as well as separate outputs. Sliding on the filters' pads with your fingers you can create a rich stereo image where each channel may have not only individual volume properties but also timbral ones. The outputs of the filters are mixed together and connected to the main output. Also in the triangle, you have a stereo direct input (DIR) that lets you bypass the filters.

The modulated stereo delay. The input of the delay is the two pads on the top of the triangle (DLY blue). The output of the delay is mixed with filter output and connected to the main output. Also, you have delay output connected to the pads placed on the left and right sides from the top of the triangle (DLY orange) that lets you create feedback and other interesting effects. The delay has two separate lines (left and right) with individual TIME controls (BPEMR pots), common FEEDBACK and the common pot that defines the amount of self-modulation (BIZZARE). The BPEMR pots are also touch inputs for delay time modulation.

On the right side of ENNER, there is a five-voice synthesizer with individual adjustment of frequency for each voice (TUNE knobs) with the possibility to change the pitch of all voices simultaneously (PITCH knob). TUNE knobs are also the outputs of the voices, so by touching them you can patch the voices to the filter's inputs. The synthesizer has separate output pads for each voice (pads OUT 1-5), individual modulation inputs (MOD 1-5) and ring modulation outputs (the RING 12, 23, 34 numbers indicate which voices are sources for the ring modulation). Connecting MOD and OUT pads of one voice with your fingers will pitch it up. The fifth voice has an additional modulation pad MOD 5- which can shift the pitch of the fifth voice down (connect it to +12 pad or any pad that has some positive signal including the output of the fifth voice).

On the left side of ENNER, there is the second synth that has one master generator, the output of which is divided six times by two with individual outputs for each stage of division (PULSE 1-6). This synth is aimed at creating rhythmical clicks, basses and octave tones. The frequency of the master generator is defined by the TEMPO knob. The output pads &1,2,3 are logical multiplications of different PULSE outputs giving additional and more complex rhythm combinations.

ENNER is also an electro-acoustic noise instrument. It has a piezo pickup attached to the front panel that captures sound from the casing itself. There is metallic spring and you can attach rubber bands to the panel to create various acoustic sounds. The piezo mic can capture clicks and scratches you make with your fingers, and it also allows you to create filtered feedback. Not only that, it can even capture your voice singing over the panel! To get sound from the piezo you have to connect the PIEZO OUT pad with some filters or delay inputs. Applying filters and delay on the piezo out while the panel works as a mic, catching the audio signal from the speakers connected to the ENNER output lets you create very cool acoustic feedback-based effects. PIEZO GAIN adjusts the piezo sensitivity.

The bottom of the triangle (NOISE pad) is the output of static pink noise.

External in (EXT socket and EXT pad) lets you send an external audio signal to ENNER and process it through the array of filters, delay and other ENNER stuff.

All of these features make ENNER a simple yet powerful kit of sound sources and FX that give you a rich and diverse sound palette with many possible playing techniques that you can change very fast as there is no other control over the sound other than your touches.

Specs

Array of filters

Pads DIR - direct input (no filters)
Pads HPF - highpass filter in
Pads BPFH - bandpass filter high mid in
Pads BPFL - bandpass filter low mid in
Pads LPF - lowpass filter in
(L - left channel, R - right channel)

Pink noise generator

NOISE - noise output

Delay

Pads DLY(blue) - delay in
Pads DLY(orange) - delay out
(L - left channel, R - right channel)
Pots BPEMR - delay time (L and R) also time modulation inputs
The UROBOROS pot - feedback (both channels)
Pot BIZZARE - delay self-modulation

Piezo

Pad PIEZO OUT - the output
Pot PIEZO GAIN - piezo amplification (also piezo output)

The five-voice synth

Pads OUT 1-5 - outputs of the voices
Pads MOD 1-5 - modulation inputs of the voices (try to connect them with OUT)
Pads RING 12, 23, 34 - outputs of ring modulators that multiply outputs of different voices
Pad MOD 5- - an additional modulation input for the fifth voice (try to connect it with +12)
Pots TUNE 1-5 - frequency of the voices (also voices outputs)
Pot PITCH - transposing all voices at once.

Rhythm\Bass synth

Pads PULSE 1-6 - output of binary dividers
Pads &1, 2, 3 - additional outputs that are logical AND of different PULSE outputs.
Pot TEMPO - the frequency of the source generator

External

Socket EXT - external in
Pad EXT - connected to EXT socket tip

Power

+12V center + 0.2A. ENNER requires a good stabilized and filtered PSU. We recommend contemporary switching mode PSUs with a wide input range. The PSU is included.

Grounding

In order that when playing on ENNER there would be no hum from the electricity grid interferences, the device must be properly grounded! A normal grounding connection at the electric socket, which is carried through the power cord to your audio equipment to which the ENNER is connected, is sufficient.

What's in the kit:

ENNER
12V center plus PSU
Several rubber bands

Notes: Second-generation version of Korg's superb ModWave synth, building on the legacy of the iconic Wavestation with 60-voice polyphony, Kaoss Physics and Motion Sequencing 2.0.

Supplier's Notes:
Modwave is a synthesis powerhouse with distinctive wavetable timbres, Kaoss Physics, and Motion Sequencing 2.0. The new Modwave mkII provides an astonishing 60 voices of polyphony almost double that of the original Modwave. All LFOs have been updated with options for free running, delayed start, and retriggering, and a pre/post switch for reverb sends has been added, alongside new modulation sources, and more.

Modern monster synth

In 1985, Korg introduced the DW-8000 - a synth which combined digital wavetables with rich analogue filters to give users sounds which were impossible to create with analogue oscillators.

Modwave builds on the DW legacy, transforming it into a modern monster synth, featuring incredibly deep wavetable oscillators, gorgeous filters, wildly flexible modulation, unmatched polyphony, comprehensive pattern sequencing, and immediately satisfying hands-on control to deliver unique, powerful, and easily customizable sounds and phrases.

Over 200 factory wavetables each contain up to 64 waveforms. 30+ Modifiers can be used to change their basic character, and 13 Morph Types to process them in real-time. Using the unique, realtime A/B Blend, it's possible to create new hybrids from any two wavetables.

Expanded possibilities

Modwave can be expanded by importing new wavetables using the free Editor/Librarian software. There are many free and commercial wavetable libraries in the standard Serum format, or you can create your own using the free, cross-platform WaveEdit software (available in a custom version for the Modwave). Wavetables can be layered with samples from the built-in, multi-gigabyte PCM library, or import your own 4 GB of samples using the Sample Builder software.

Each Program has two full-featured wavetable oscillators, plus a sub oscillator/noise generator and any of a dozen stereo filter types, including the aggressive MS-20, sweet Polysix, and the newly enhanced Multi Filter. Animate almost any parameter using the massively flexible modulation system, with four triggerable envelopes, five LFOs, dual mod processors and two key-track generators-plus multi-lane Motion Sequencing and Kaoss Physics.

Even with all that synthesis power, playing up to four simultaneous wavetables per voice in a single Program, the Modwave mkII achieves 60-voice polyphony, incredible for a wavetable synth. Layer two Programs together for double the possibilities.

KAOSS in motion

Modwave introduced two unique new tools for creating dynamic motion: Kaoss Physics and Motion Sequencing 2.0. KaossPhysics combines an x/y Kaoss pad with modulatable game physics to create a responsive, interactive controller that is extraordinarily powerful.

Motion Sequencing 2.0 brings the organic, continuously evolving patterns of the Wavestate Wave Sequencing 2.0 into the world of motion sequencing, including multiple lanes and real-time recording to help you create complex and evolving phrases that other step sequencers cannot.

Modwave's evolved wavetable synthesis delivers its own brand of completely unique sounds and a knob-per-function layout that makes customizing those sounds fast and easy. There are hundreds of preset sounds empowered by this new architecture, organised by front-panel category buttons, and all instantly customizable via the four Mod Knobs. Modwave'sdistinctive wavetable timbres start with aggressive basses & leads, and lush ambient pads which will add a new dimension to your tracks. But that is just the beginning.

Those who want to dig deeper will find an endless source of discovery; with the Modwave's unique synth architecture, you'll be finding new things for a long, long time. Save as many of your sounds as you like; there's room for thousands more. You can also load your own samples, import wavetables in standard formats, and create your own wavetables using the free WaveEditsoftware.

KAOSS Physics

Kaoss Physics models a ball rolling on a surface and bouncing off walls. The surface can tilt in any direction, and a bump with variable height/depth and location attracts or repels the ball. Adjustable friction slows the ball's travel, and adjustable time controls the speed of the entire model. All of these characteristics are modulatable, so you can change them in real-time!

Start the ball by flicking a finger on the x/y pad, or launch the ball automatically using another modulation source. You can even directly control the ball by holding your finger on the pad. The position of the ball produces eight modulation signals, which can be used to control any modulation destination: the X and Y locations, the distance from the centre, the angle relative to the X axis, and separate signals for +/- X and +/- Y.

Walls can slow down the ball, as if they were padded, or accelerate the ball, like bumpers in a pinball machine. The walls can also be removed entirely, so that the surface wraps around to the opposite edges like a vintage arcade game.
The modelled environment can create specific modulation effects. For instance, use a centered bump with negative height so that the modulation values always eventually return to 0. Or, position a bump with positive height on a side or a corner, to push modulation values away from that zone.

The result is an interactive controller that amplifies your physical gestures, transforming them into complex musical results.

Motion Sequencing 2.0

Motion Sequencing 2.0 is evolved from the Wavestate's Wave Sequencing 2.0. Timing, Pitch, Shape, and four sets of Step Sequence values are separated into "Lanes," each with their own loop start and loop end, adding a deeper, more customizable level of phrase and modulation recording.

Every time the sequence moves forward, the individual Lanes are combined to create the output. For instance, a step sequence value may be matched with a different duration, pitch, and shape every time that it plays. You can modulate each Lane's loop points separately for every note, using velocity, LFOs, envelopes, Mod Knobs, or other controllers. Each note in a chord can be playing something different!

Lanes can also randomize the step order every time they play. Finally, individual steps can be randomly skipped, with a modulatable probability from 0 to 100%. The result is organic, ever-changing sounds that respond to your control. The dual onboard arpeggiators can interact with Motion Sequences for even more possibilities.

Wavetables

Wavetables are sets of single-cycle digital waveforms, arranged in a specific order. The wavetable's "position" determines which waveform is played. Moving the position with an envelope, LFO, or other modulation source creates subtle or dramatic changes in timbre. Some wavetable systems switch abruptly from one waveform to another; others crossfade smoothly between them. Modwave can do either one.

Modifers

Use over 30 Modifiers to alter the character of any wavetable at load time. For instance, isolate the odd or even harmonics, add weight through anti-aliased quantization or saturation, or revisit the gritty character of old-school wavetable synths with the Vintage 8 & 12 options.

Morph

The 13 Morph Types let you stretch, squeeze, reflect, and otherwise alter the wavetables in real-time, changing their timbre andiwhen modulatedicreating additional motion in the sound. Sync creates classic swept-sync timbres, using only a single oscillator. Three special Morph TypesiFM, AM, and Ring Modimodulate Osc 2 with Osc 1, and the last two even apply to samples.

A/B Blend

Using the unique A/B mode, oscillators can blend any two wavetables with phase-synchronous precisionidifferent from simply layering voicesiopening up a dimension of intermediate waveforms. Add body to otherwise "thin" waveforms, for instance, or a touch of sizzle to a mellow timbre. Even fade between two different "modifier" versions of the same wavetable. A/B Blend can be modulated in real-time, of course.

Or, step outside the box with Korg's unique Multi Filter, which creates modulatable blends of multiple modes simultaneously - now with presets on a front panel knob, for easier exploration of its many possibilities.

An arsenal of effects

Modwave's superb effects deliver production-ready sounds. Each Layer has three dedicated effects, plus a send to the Performance's master reverb, followed by a master parametric EQ. Along with standards such as compressors, EQs, choruses, flangers, phasers, and stereo delays, you'll find distinctive processors such as the Wave Shaper, Talking Modulator, Reverse Delay, Multiband Mod Delay, and Overb (from the OASYS and Kronos), plus modeled effects including VOX guitar amps, VOX wah, multi-head tape echo, and a collection of classic guitar pedals.

Notes: Serge Tcherepnin's superb DUSG multi-function module gets redesigned and updated for Eurorack. Function generator, integrator, oscillator and much more.

Supplier's Notes:
The Serge GTS is a complete redesign of the famous Serge Dual Universal Slope Generator (DUSG) by Serge himself - with a new core, optimized for speed and tracking. Like some of the clones it can be used for CV, but also provides exceptional audio performance: transient rise times as fast as 13us and a maximum cycle speed of 27kHz.

Some functions for which one Slope Generator can be used:

Function generator for linear, logarithmic, exponential, stepped etc. curves
Integrate an incoming signal
Sawtooth / Pulse oscillator
Add, subtract up to 4 signals
Max and Min function
VC Transient Envelope Generator
VC LFO
VC Portamento device, Envelope Follower (Detector), VC Pulse Delay (Monostable), Sub-Harmonic Series Generator (Divider), Audio Oscillator with variable waveform symmetry (saw to triangle), Non-Linear Audio Processor (low-fidelity VCF).
Serge GTS for eurorack:

Designed by Serge Tcherepnin 2021-2023
Increased audio range (up to >28kHz)
Tracks >5 octaves as a Sawtooth / Pulse oscillator
Temperature stabilized
Eurorack format (3U), 26 hp
Power consumption: 90mA @ +12V, 80mA @ -12V
(NEW) Skiff-friendly: < 25mm (1")

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


Typically experimental stuff from Soma, the Enner is a five-voice synth with an array of filters, electro-acoustic noise options, analogue effects and huge creative potential.

Supplier's Notes:
ENNER is a very expressive sound tool that can generate bits, pads, FX, noises, clicks, glitches, but also function as a cool vocal mic with built-in analogue FX and much more! A musician with a rich imagination and who's experienced in playing ENNER can perform an entire exciting gig using just this synth.

As an instrument, ENNER is a unique analogue synthesizer with the key principle being that all signals that make sound pass through and are managed by your body. Your hands become the central part of the circuitry. Touching different contact pads with different parts of your fingers and palms with different amounts of pressure, letting signals pass through your body defines the mixing, volume, timbre, feedback and other parameters of synthesis. Human skin has much more complex electric properties than we think. The skin provides not just resistance but also some capacitive properties and even nonlinear dependence of conductivity from current, its direction and time during which the current was applied. All of this affects the sound, making you the key part of the synthesis process.

All pots of ENNER are metallic and also function as inputs or outputs. Touching a pot can change not only the parameters but also patch the audio signals.

ENNER consists of:

The array of filters with fixed frequency properties (the triangle in the centre): the stereo high pass filter (HPF), the stereo bandpass filter (high mid - BPFH), the stereo bandpass filter (low mid - BPFL), the stereo lowpass filter (LPF). Stereo means that the filters have separate inputs for left and right channels as well as separate outputs. Sliding on the filters' pads with your fingers you can create a rich stereo image where each channel may have not only individual volume properties but also timbral ones. The outputs of the filters are mixed together and connected to the main output. Also in the triangle, you have a stereo direct input (DIR) that lets you bypass the filters.

The modulated stereo delay. The input of the delay is the two pads on the top of the triangle (DLY blue). The output of the delay is mixed with filter output and connected to the main output. Also, you have delay output connected to the pads placed on the left and right sides from the top of the triangle (DLY orange) that lets you create feedback and other interesting effects. The delay has two separate lines (left and right) with individual TIME controls (BPEMR pots), common FEEDBACK and the common pot that defines the amount of self-modulation (BIZZARE). The BPEMR pots are also touch inputs for delay time modulation.

On the right side of ENNER, there is a five-voice synthesizer with individual adjustment of frequency for each voice (TUNE knobs) with the possibility to change the pitch of all voices simultaneously (PITCH knob). TUNE knobs are also the outputs of the voices, so by touching them you can patch the voices to the filter's inputs. The synthesizer has separate output pads for each voice (pads OUT 1-5), individual modulation inputs (MOD 1-5) and ring modulation outputs (the RING 12, 23, 34 numbers indicate which voices are sources for the ring modulation). Connecting MOD and OUT pads of one voice with your fingers will pitch it up. The fifth voice has an additional modulation pad MOD 5- which can shift the pitch of the fifth voice down (connect it to +12 pad or any pad that has some positive signal including the output of the fifth voice).

On the left side of ENNER, there is the second synth that has one master generator, the output of which is divided six times by two with individual outputs for each stage of division (PULSE 1-6). This synth is aimed at creating rhythmical clicks, basses and octave tones. The frequency of the master generator is defined by the TEMPO knob. The output pads &1,2,3 are logical multiplications of different PULSE outputs giving additional and more complex rhythm combinations.

ENNER is also an electro-acoustic noise instrument. It has a piezo pickup attached to the front panel that captures sound from the casing itself. There is metallic spring and you can attach rubber bands to the panel to create various acoustic sounds. The piezo mic can capture clicks and scratches you make with your fingers, and it also allows you to create filtered feedback. Not only that, it can even capture your voice singing over the panel! To get sound from the piezo you have to connect the PIEZO OUT pad with some filters or delay inputs. Applying filters and delay on the piezo out while the panel works as a mic, catching the audio signal from the speakers connected to the ENNER output lets you create very cool acoustic feedback-based effects. PIEZO GAIN adjusts the piezo sensitivity.

The bottom of the triangle (NOISE pad) is the output of static pink noise.

External in (EXT socket and EXT pad) lets you send an external audio signal to ENNER and process it through the array of filters, delay and other ENNER stuff.

All of these features make ENNER a simple yet powerful kit of sound sources and FX that give you a rich and diverse sound palette with many possible playing techniques that you can change very fast as there is no other control over the sound other than your touches.

Specs

Array of filters

Pads DIR - direct input (no filters)
Pads HPF - highpass filter in
Pads BPFH - bandpass filter high mid in
Pads BPFL - bandpass filter low mid in
Pads LPF - lowpass filter in
(L - left channel, R - right channel)

Pink noise generator

NOISE - noise output

Delay

Pads DLY(blue) - delay in
Pads DLY(orange) - delay out
(L - left channel, R - right channel)
Pots BPEMR - delay time (L and R) also time modulation inputs
The UROBOROS pot - feedback (both channels)
Pot BIZZARE - delay self-modulation

Piezo

Pad PIEZO OUT - the output
Pot PIEZO GAIN - piezo amplification (also piezo output)

The five-voice synth

Pads OUT 1-5 - outputs of the voices
Pads MOD 1-5 - modulation inputs of the voices (try to connect them with OUT)
Pads RING 12, 23, 34 - outputs of ring modulators that multiply outputs of different voices
Pad MOD 5- - an additional modulation input for the fifth voice (try to connect it with +12)
Pots TUNE 1-5 - frequency of the voices (also voices outputs)
Pot PITCH - transposing all voices at once.

Rhythm\Bass synth

Pads PULSE 1-6 - output of binary dividers
Pads &1, 2, 3 - additional outputs that are logical AND of different PULSE outputs.
Pot TEMPO - the frequency of the source generator

External

Socket EXT - external in
Pad EXT - connected to EXT socket tip

Power

+12V center + 0.2A. ENNER requires a good stabilized and filtered PSU. We recommend contemporary switching mode PSUs with a wide input range. The PSU is included.

Grounding

In order that when playing on ENNER there would be no hum from the electricity grid interferences, the device must be properly grounded! A normal grounding connection at the electric socket, which is carried through the power cord to your audio equipment to which the ENNER is connected, is sufficient.

What's in the kit:

ENNER
12V center plus PSU
Several rubber bands

Notes: A revolutionary keyboard controller that puts the world's best sound library at your fingertips. Get direct, hands-on control of virtual instruments from NI and thousands more from developers like Arturia, Heavyocity, Korg, Output, Spitfire Audio, and u-he.

Browse and tweak everything from synths and drums to orchestral libraries and scoring tools - all seamlessly integrated with Kontrol's tactile controls and large, high-res screen. Then play with a new level of expression and freedom thanks to a best-in-class keybed, polyphonic aftertouch, Light Guide, and Play Assist features. And with a comprehensive package of included software, featuring the industry-leading sampling platform Kontakt 7, you'll be ready to go from day one.

Polyphonic aftertouch

Take expression one step further with the slightest pressure on individual keys. Bring new layers of nuance to your playing with cutoff, pitch, vibrato, and much more, without reaching for an extra encoder or dial. All three models come complete with polyphonic aftertouch on an industry-leading keybed developed in collaboration with Fatar.

Thousands of instruments made real

Kontrol brings the world's best virtual instruments to life in a genuinely immersive experience. Whatever you're playing, get in-depth control thanks to an unparalleled direct connection to Kontakt. Find sounds quickly with intuitive on-screen navigation, then adjust and play them with intelligent auto-mapping that understands the parameters.

Included software

Kontrol comes with a host of creative music production tools - all fully integrated with the hardware, to give you everything you need to start making music straight out of the box.

Included software
Kontakt 7
A free Kontakt instrument of your choice
Komplete 14 Select
Komplete Kontrol Software
Stradivari Cello

An internet connection and a graphics card that supports Direct 3D 11.1 (feature level 11_0) or higher are required to download and activate this product. Once installed and activated, the product can be used offline.

NKS 2 NKS (Native Kontrol Standard) is NI's technical standard for virtual instruments and effects. It's used across the industry and ensures that all compatible plugins are precisely mapped to controls. Kontrol marks the launch of NKS 2, which powers the unmatched software integration experience.

S49 MK3 Dimensions: 802.2 × 323 × 86 mm
Weight: 5.5kg

Hardware specifications:
1 high-resolution colour screen with glass surface (1280 × 480)
CNC machined, bead blasted and anodized aluminum, 8 × encoder caps, 1 × 4D encoder cap, 2 × wheels (pitch and mod)
RGB illuminated pitch and mod wheels
New button-islands that form a continuous dustproof control surface and are grouped by function

System requirements

MIDI 2.0 compatible
Intel Core i5, Apple M1 (and equivalent or higher)
macOS 13 (Ventura) or higher (compatible with macOS 12 in MIDI 1.0 mode)
Windows 10 (latest service pack) or higher
8 GB RAM

Notes: Unique studio monitors from AIAIAI, featuring built-in battery power and high-resolution, low-latency Wireless+ streaming for fully wireless use in any setting. Compact, versatile and powerful.

Supplier's Notes:
Wireless and portable studio monitors with powerful performance and accurate sound representation. Connect wirelessly for a clutter-free setup and bring your creative process anywhere.

Experience unparalleled flexibility and truly liberating mobility in your creative process as a music producer. These studio monitors allow you to create and mix music with accurate sound representation and powerful performance wherever you are. Connect wirelessly to your devices and enjoy crystal clear audio without the hassle of cables. Take control of your creativity and elevate your music to the next level with these wireless portable studio monitors.

Complete wireless freedom

Battery powered with 20H+ of playback time
W+ Link ultra low latency wireless audio for music creation - only 16ms of latency, uncompressed audio and robust connection
Complete wireless freedom - both audio and power cables

Reference monitor sound

2 way active monitor featuring a 4 inch high-excursion woofer and 1 inch silk-dome tweeter
Precision tonal accuracy over a flat +/-2dB frequency response from 50Hz to 20kHz
Bass vent and boosting EQ tuned to provide a clean bass extension down to 40Hz
Precise soundstage and point-source accuracy provided by the minimal front panel design,
incorporating a directivity controlling tweeter waveguide
Stage monitor design enables you to place the speaker upright or angled horizontally, to
optimise your sound field in changing workspaces
Shape UNIT-4's sound to your environment or preference using the AIAIAI app customisable
5-band EQ

Portable, compact and rugged

Size and weight of only 3 litres / 2.5kg
Rear bass vent designed to be a comfortable carrying handle when on the move
Removable steel grille provides sturdy protection for the woofer and tweeter

Connect to everything

W+ Link - use the X02 transmitter for low latency wireless music creation
Bluetooth 5.2 - listen to music from your Bluetooth enabled devices
Cable - connect directly via 3.5mm mini-jack and 6.3mm balanced TRS inputs

Responsible design

Main components produced from 100% recycled plastics, from post-consumer sources
Designed for disassembly and engineered from the inside out
Mechanically assembled in a glue-free design
Take the whole speaker apart using two screwdrivers
Replaceable components including battery and drive units
Future-proofed for new technologies with upgradable wireless electronics

In the box:

UNIT-4 Wireless+ 2pcs

Portable and ultra-low latency wireless studio monitors. Includes protective steel grills and power supplies with regional cord.

X02 Transmitter - 1pcs

USB-C W+ Link transmitter. Transmits to 2 x W+ Link devices simultaneously. Includes a 0,2m USB-C to USB-C cable in neon.

Protective pouch 2pcs

UNIT-4 protective pouch in black. Made from compostable fabric material.

Tech Specs

Freq. range: 40Hz to 40kHz (-10dB)
Freq. response: 50Hz to 20kHz (+/-2dB)
Peak SPL: 105 dBSPL
Woofer: 4-inch high excursion paper cone woofer
Tweeter: 1-inch silk dome tweeter
Amplifier power: 2 x 30W continuous, 2 x 80W peak
W+ Link latency: 16 ms
Bluetooth version: 5.2
Analogue inputs: 3.5mm mini-jack + 6.3mm TRS balanced
Playback time on battery: 20 hours
Charging time: 2 hours
Battery capacity: 77 Wh

Notes: Studio-grade control for your mixing process, the Console 1 Channel is arguably the best way to get hands-on with all major DAWs. Includes Softube's new Core Mixing Suite software, billed as 'the perfect channel strip'.

Supplier's Notes:
Mixing. The way it should be.

Console 1 Channel lets you use your hands to mix and your ears to sculpt your sound. Each knob corresponds to a specific parameter and no mapping is necessary. Gain is always gain. Ratio is always ratio. The dual high-resolution smart screens keep you focused on the sound of your mix. Intuitive and efficient, Channel lets you go deeper into your creative process. And enjoy it!

World-class console sound

Console 1 Channel gives you world-renowned console sounds because that's what Softube do: give you exacting models of professional-grade, standard-setting gear - from Solid State Logic and Tube-Tech to Chandler Limited. You can load Summit Audio Grand Channel, Weiss Gambit Series, or extremely punchy Empirical Labs strip. Channel comes with Softube's take on the perfect channel strip: the new Core Mixing Suite software.

World-class console feel

Console 1 Channel will be the sexiest gear your desk has seen in a while. The premium materials, stunning Nordic Night Sky finish, and robust build mean that it outshines all others in its class. But Channel is more than just studio bling. Every rotation of Channel's touch-sensitive Analog Feel™ potentiometers - and an increase of more than ten times the resolution over the previous generation - gives you the sensation of the priciest outboard gear. They feel analogue because they are.

Core Mixing Suite: the perfect channel strip

Console 1 Channel comes with the new Core Mixing Suite software. It gives you the award-winning sounds of Tape, FET Compressor Mk II, and Bus Processor in the versatile preamp, shape, equalization, and compression sections. Also included is an innovative drive section befitting Softube's reputation for saturation. Core Mixing Suite combines Softube's deep DSP knowledge with processors that will take you through your entire process, from the broad strokes to the surgical corrections.

A perfect fit for your DAW

Just plug it in and Console 1 Channel works with all major DAWs. Without mapping. Click below to learn more about Console 1 compatibility with Logic, Pro Tools, Ableton Live, Cubase, Studio One, LUNA, Reaper, FL Studio, Nuendo, and Cakewalk.

A perfect fit for your studio

A studio is as individual as the music makers who call it home. Console 1 Channel is built to fit your studio - no matter the setup.

Technical specs & setups

Included Software

Console 1 Core Mixing Suite, including:
Tape/Preamp: tape drive model
Filters: 6, 12, 18, 24, 48 dB included (default is 18 in bass and 12 on top
Shape: Dynamic Shaper, Panner, Dual Dynamics
2 EQs: Modern precise and vintage passive parallel
3 Compressors: FET Mk II, Opto and Bus Compressor

Connectivity: Dual USB-C ports
Daisy Chain Units: Yes
Power: Console 1 bus powered (USB-C), or powered by included power supply
Sections: Tape/Preamp, Filters, Shape (Dual), EQ (Dual), Compressor (Dual), Drive/Character
DAW Control: Volume, Pan, Solo/Mute, 6 Sends, Track Select
High Resolution Screens: 2 high resolution screens showing EQ and compressor curves, VU meter, and track information
LED colour: 51 RGB LEDs for track selection. White LEDs for knob read-out
Knobs: 27 touch sensitive high-resolution Analog Feel potentiometers
Mounting options: 100 mm M4 VESA on the bottom. M4 threads on the sides
Construction: Anodized aluminium top, injection moulded smooth sides and back with integrated connectivity points
Dimensions (W x H x D): 435 mm x 45 mm x 219 mm / 17.1" x 1.77" x 8.66"
Weight: 1,80 kg / 3.96 lbs

Notes: ***B-STOCK: Box opened, product in perfect working order***


One of the most impressive granular synthesis approaches in Eurorack, combining looping and granular effects with buffer sizes up to five minutes. Hugely creative and powerful dual-module setup.

Supplier's Notes:
There's a long history behind the granular concept and many reinterpretations of it's core principles, this is ADDAC's take on it.

In a loose description digital Granular refer to pieces of sound files being played at the same time with slight or completely different parameters originating what is commonly referred to as granular clouds. Normally there's a buffer size from which the granular engine snips it's pieces from and plays them according to the parameters set. This buffer size is normally small in size where grains are so small that can reach the hearing spectrum and be heard as a sort of ever changing complex wavetable, this is the principle behind granular synthesis.

ADDAC have added the possibility of long buffer sizes up to 5 minutes, allowing "softer" approaches to the granular principle using it as an effect that can generate from "accidental" effects like slight "stutters" to extreme processing and transformation of any incoming audio signal.

This module is conceptually deep but easy to grasp and operate as all controls are in its dedicated panel, all jack inputs and outputs have its own separate panel to allow no compromise when playing it's controls.

There are three main sections in this module:
Looper Engine: The Looper is where all the Real-Time recording happens. The audio input feeds the recording buffer, multiple controls allow to record and play loops into a list so that any sample in the list can be accessed at ay time and more acting as a standard looper
Granular Engine: The Granular acts upon the buffer of whatever LOOP is selected.
Output Mix The output mix allow individual control for the Dry Input, Looper Volume and Grains Volume.
Besides these main sections there's also a simple strip down MENU mainly used to LOAD and SAVE Banks, no Menu diving guaranteed.

For more detailed info, please refer to the User's Guide.

Audio Specs:
Audio input: Stereo, 16bit 44.1Khz
Audio output: Stereo, 16bit 44.1Khz

Tech Specs:
32HP + 13HP
4.5cm deep
240mA +12V
70mA -12V

Notes: One of many performance mixers released in 2023, NANO's offering treads its own path with knob recording, allowing you to automate and play back movements. A clever approach which opens up some interesting performance techniques.

Supplier's Notes:
Performance Mixer serves as a central control and mixing hub for your modular system, allowing you to combine and shape multiple audio signals from various sound sources.

But what really makes it stand out is its Knob recording feature. Just hit REC, twist the knob, and let the module record your moves.

4 different areas

MONO

Channels 1 . 2

Volume, Panning and Auxiliary send controls with CV for each function.

Knob recording (REC), CUE bus and MUTE function are operated through the switches.

STEREO

Channels 3 . 4

Same as MONO Channel, but the CV for the AUX function is replaced by the right (R) audio input.

AUXILIAR

2 Mono Sends (X & Y) with pre-fader / post-fader selector for each channel.

2 Stereo Returns with volume adjust.

MASTER

Master volume adjust for the main outputs with vu-meter for checking the signal levels.

Headphone output with volume and cue/mix blending knob.

Knob Recording.

Easily record and loop the movements of AUX, PAN and VOLUME controls on each channel, adding depth and dynamism to your sound.

Just press the REC button and then move the desired knobs to start recording.

MUTE LED

The light on the MUTE button not only shows whether each channel is muted or not, but also gives information about the status of its Knob Recording function.

Specifications

Dimensions 28HP - 142,2×128,5mm
Current 200 mA +12V / 125 mA -12V / 0 mA +5V
Input & Output Signals +/-10V
Impedance Input 10k - Output 10k
Materials PCB and Panel - FR4 1,6mm
Depth 40mm including connectors (Skiff friendly)

Notes: Built with durability and sound quality in mind, the TS12S is Alto's most powerful subwoofer, packing a huge 2500W for professional performance from a manageable 25.9 kg package.

Supplier's Notes:
Rock-Solid Sound from the Bottom, Up

The best performances need the best in sound reinforcement at all ends of the sonic spectrum. For tight, punchy low-end look no further than the Alto Professional TS12S powered subwoofer. When added to your full-range speaker setup, the TS12S subwoofer delivers powerful but controlled low-end presence to your PA configuration for a full and complete listening experience for the modern public music space. With a powered subwoofer, any musical performance will take a giant leap into the realm of tonal balance with the perfect blend of hi, mid, and extended low-end frequencies.

The Most Powerful Subwoofer Yet

Sound reinforcement needs can change from night to night but the best in the business count on reliable power at their disposal whenever it's needed. The TS12S is Alto Professional's most powerful subwoofer yet, packing an incredible 2500 watts of power to make concert halls come alive, night clubs punch and pump, houses of worship lift-up instrumental performances, and more. Thanks to its high-efficiency Class D amplifier, TS12S adds the necessary heft and weight to any public performance for a balanced representation of musical artistry in any environment.

Carefully Built for Quality Performance

A structure is only as good as its foundation and your sound is no different. The TS12S subwoofer is built with reliable durability in mind to be the anchor of your setup and the anchor of your sound. Built with superior materials, the TS12S is engineered with a premium internally braced composite cabinet enclosure for tight, controlled sound. Enjoy all the thump and bump without the unnecessary rumbles and rattles. The key to low-end is clear definition for impactful sonic transmission and a carefully crafted enclosure ensures a truly unbiased sound delivery. With a premium 12-inch driver featuring a 3-inch, voice coil transducer, rest assured, the TS12S subwoofer is built to handle the rigors of live performance whether permanently installed or as part of a traveling setup, night after night.

A Subwoofer for Any Setting

What good is a sub if it doesn't play along nicely with the rest of your speaker setup? The TS12S is designed and engineered to fit into any system thanks to the versatile onboard electronics switches. Quickly bounce through the User-selectable EQ tunings to enable, boost, or bypass low end accentuation appropriately as different shows require. Use the intuitive Phase Alignment function as needed to make sure your tops and subs perform well no matter the setting or setup. With dedicated input and output paths, seamlessly connect your companion Alto Professional full-range loudspeakers or any other standard loudspeaker units.

Technical Specifications

Output Power: 2500W peak @ 4 O
Transducer: Low 12" (305 mm) woofer; 3" (76.2 mm) high-temperature voice coil
Frequency Response: 44 Hz - 140 Hz (- 3 dB)
Frequency Range: 38Hz-152Hz(-10dB)
Maximum SPL: 130dB(@1m)
Connections: (2) XLR+1/4" (6.35 mm) inputs; (2) XLR outputs; (1) IEC power cable input
External Controls: Volume control, signal/clip limiter with LED, speaker use button, proximity button, power switch with LED
Electronic Protections: Electronic clip, thermal and transducer overdrive protection
Enclosure: Internally braced MDF cabinet; 36 mm mounting pole socket on top panel

Power

Connection: Standard IEC cable
Input Voltage: 100-120, 50/60 Hz; 220-240 VAC 50/60 Hz
Consumption: 1600W
Fuse: 100-120V, T15AL AC250V; 220-240V, T8AL AC250V
Dimensions (height x width x depth): 17.9" x 18.1" x 19.9" / 454.7 x 459.7 x 505.5 mm
Weight 57.1 lbs. / 25.9 kg

Notes: One of the most trustworthy brands in the industry delivers another winner. Proper high-end business, with 12 analogue inputs and 12 outputs, plus an extensive array of digital connections. Great value at this price point.

Supplier's Notes:
Next-gen 28 x 32 USB3 audio interface - Builds on 22 years of proven success as an industry-leading audio interface brand.

New 3.9-inch TFT display - The bright, 24-bit RGB LCD provides 480 x 128 pixel high-resolution metering for all analogue and digital I/O, plus detailed status info and access to hardware settings from a simple and convenient menu.

Superb analogue audio quality and high-end converters - Renowned ESS Sabre32 DAC technology delivers 125 dB dynamic range. Support for all standard sample rates up to 192 kHz.

Ultra-low latency and proven, high-performance MOTU drivers - Round-trip latency (RTL) performance as low as 2 ms at 96kHz with high-performance DAW hosts.

Universal connectivity - Connects to your computer with 5 Gbps USB3 (compatible with USB2) for up to 60 audio channels. Class-compliant firmware and industry standard drivers work with any audio apps. Connects to an iPad™ with USB-C or a Lightning adapter kit (sold separately).

60 simultaneous audio channels - 28 inputs and 32 outputs, including two combo XLR/TRS mic/line/hi-Z guitar inputs with send/return inserts, 8 TRS analogue (line-level) in/out, separate main outs on XLR jacks, two banks of 8-channel optical I/O, stereo RCA S/PDIF digital I/O, and two front-panel headphone outputs.

Advanced mic channels - Cutting-edge components deliver ultra-transparent sound with -114 dB THD+N, 118 dB dynamic range and -129 dBu EIN. Each mic channel provides individual controls for +74 dB of preamp gain, -20 dB pad, 48V phantom power, and phase invert. All settings can be controlled remotely from a computer or iOS device. Each mic channel includes a dedicated send/return insert for outboard gear processing.

Flexible insert returns - When nothing is connected to the front-panel mic inputs, the two rear-panel returns function as additional line inputs with identical signal path characteristics as the other eight line inputs.

DSP mixing and effects processing - Flexible 24-input digital mixer with 8 stereo busses and DSP effects, including reverb, 4-band EQ, gate and compression.

Wi-Fi control - If the 828 is connected to a computer on your Wi-Fi network, you can control everything wirelessly from the CueMix 5 app running on mobile devices or other computers on the same network - even multiple devices at the same time. Manage access to the 828 with network discovery and password protection.

Precision boost/trim for analogue I/O - Calibrate analogue input and output signals in precise 1 dB increments. Apply phase invert individually to analogue inputs.

Control room features - Control your sessions with front-panel "talk" button and "A/B" speaker select buttons to quickly compare your mixes on two sets of studio monitors.

Two flexible headphone outputs - With independent volume control, each headphone output can mirror each other, the Main Outs, any other analogue output pair, any CueMix bus, or any USB output channels. Or you can create a completely customized mix for each headphone that includes live 828 inputs and built-in reverb.

Two banks of optical I/O - Connect outboard digital processors, digital mixers or other gear with 16 channels of ADAT at 44.1/48 kHz or 8 channels of SMUX at 88.2/96 kHz. Bank A can optionally provide stereo TOSLink (optical S/PDIF) I/O up to 96 kHz.

Foot switch input - Connect a standard foot pedal switch (sold separately) for hands-free punch-in and punch-out while recording. Or map the pedal to any keystroke function in your host software.

MIDI in/out/thru - connect MIDI gear without the need for a separate MIDI interface.

Word clock in/out/thru - Supports all sample rates up to 192 kHz.

DC-coupled TRS outputs - Use the 828 to manipulate and sequence voltage-controlled modular synthesizers from a host DAW.

Loopback for live streaming and podcasting - Easily route computer output back to the computer, where you can mix it with live mics and/or guitar inputs from the 828 in your host software for live streaming or podcasting.

Guitar re-amping - Connect your guitar to the front-panel input, use CueMix's near-zero latency to loop to any output (with a re-amp adapter, if needed), and record both the dry signal and your mic'd up amp simultaneously. Then re-amp the dry signal later with different amps and cabs - or amp modelling plug-ins - to experiment with different tones.

CueMix 5 app - Control mixing and settings from your Mac, PC or iOS device.

Performer Lite - Workstation software with over 100 included instruments, dozens of effects and 6 GB of included loops to make music right away. Also includes Ableton Live Lite.

Next-gen 28 x 32 USB3 audio interface with DSP, mixing and effects
New 3.9-inch 24-bit RGB LCD with precision metering for all I/O
Superb analogue audio performance driven by ESS Sabre32 Ultra™ DAC Technology
Ultra-low latency and proven, high-performance MOTU drivers (~2 ms RTL with a 32 sample buffer @ 96 kHz)
Universal connectivity with 5 Gbps USB

Technical Specifications
Sample rates: 44.1, 48, 88.2, 96, 176.4, 192 kHz

Mic/line/instr inputs
2 x XLR/TRS "combo" jacks
Individual -20 dB pad and 48V phantom power
Preamp gain: +74 dB in 1 dB increments
1 MO impedance on the line/instr inputs
Independent balanced send/return inserts

Analogue inputs
8 x 1/4-inch TRS line in (balanced/unbalanced)
2 x 1/4-inch insert returns function as balanced TRS line inputs (with no mic inputs connected)
Max level: +21 dBu
+20 dB digital gain on each input

Analogue outputs
8 x 1/4-inch TRS line out (balanced, DC coupled)
2 x male XLR out
Max level: +21 dBu
2 x 1/4-inch TRS stereo headphone
2 x 1/4-inch TRS sends (balanced, pre-converter)

Digital I/O
2 banks (16 ch) of ADAT optical I/O at 1x sample rates
2 banks (8 ch) of S/MUX optical I/O at 2x sample rates
Bank A switchable to stereo TOSLink I/O (optical S/PDIF)
1 x stereo S/PDIF I/O on RCA (up to 96 kHz)

Computer I/O
1 x USB-C 3.2 Gen 1 (5 Gbps) Type C - USB2 compatible USB audio class compliant (no driver needed)
1 x IF-certified USB 3.2 Gen 1 Type C-to-C cable included
Compatible with USB Type A (with a C-to-A cable, sold separately)
Total USB audio channels: see "Total Audio I/O" below
Round Trip Latency (RTL): ~2 ms (32 sample buffer at 96K)

Total audio I/O
28 in / 32 out (60 total channels) at 1x sample rates
20 in / 24 out (44 total channels) at 2x sample rates
10 in / 14 out (24 total channels) at 4x sample rates

MIDI I/O
1 x MIDI In
1 x MIDI Out/Thru
16 MIDI channels to/from computer host

Headphone
2 x 1/4-inch TRS stereo headphones
Output impedance: <1O
Max output: 14.4 dBu

Phantom power: 2 x individual +48V

Foot Switch
1 x 1/4-inch foot switch input
Mapping: pedal up/down to any host keystrokes

Sync I/O
1 x BNC Word Clock In
1 x BNC Word Clock Out/Thru
Sample rates: all (from 44.1 to 192 kHz)

Front panel
2 x XLR/TRS combo inputs
2 x 1/4" TRS headphone outputs
2 x potentiometer - headphone volume
2 x potentiometer - mic/instr input gain
1 x potentiometer - menu navigation
1 x large potentiometer - main volume
12 x switches - (2) 48V, (2) pad, (6) control room, (2) nav
1 x 3.9-inch 480 x 128 pixel 24-bit RGB TFT display
1 x latching power button

Power
Internal 100-240V autoswitching supply
50-60 Hz - 0.5A max

Dimensions and weight
(width x depth x height, enclosure only)
19 x 12.25 x 1.75 inches / 48.26 x 31.1 x 4.44 cm
11 lbs / 5 kgs

Notes: The S1 is a promotional bundle that Tiptop Audio is offering to users, providing a 33% savings to get you started with ART. With these bundles, this incredible voice is included: the big, beefy 3 VCO stack. The bundles come in two options: Bundle S1, which uses the ART V/OCT Quantizer as a controller, and Bundle S2, which uses Octopus as a controller. In addition to the controllers, there are three ATX1 analogue oscillators, MIX7 for mixing them with plenty of headroom, and followed by the beloved 4-pole Z2040 filter that has been with TipTop since day one; it just sounds so good. Finally, we end up with Control Path dual envelope plus VCA dynamics modules. This special price is time limited and while supplies last.

ART QUAD QUANTIZER is a four channel CV to ART Quantizer to play ART oscillators from CV sequencers, LFOs and anything that outputs CV. This is Tiptop's second ART controller option and is designed for those of us playing ART without a computer or MIDI source. The inputs take in positive, negative, bipolar CV voltages. Scales include Major Minor and the five other modes (Dorian, Lydian, etc). The module is simple to set up with a simple menu and one knob with switch for navigation. The 4th channel can be set to generate Chords and polyphonic note streams for ART Polyphonic oscillators.

Size: 8HP - Depth: 40mm / 1.5"
Power: +12V 38mA / -12V 4mA

ATX1: a classic all analogue saw VCO core with 3 switchable modes, ART, 1V/Oct, LFO and is recommended as the basic building block for ART systems. It is designed for patching analogue polyphonic synths from discrete modules or multi-mono patches in ART mode. When using ART the ATX1 takes care of the tuning including accounting for temperature changes. In 1V/Oct mode the ATX1 runs as a standard old school modular VCO. LFO mode drops the frequency range and is great for patching vibrato to other ATX1s among other things. The ATX1 outputs variable waveshapes with manual or CV control. Classic FM, PWM and hard sync are provided. A dedicated Gate Out in ART mode manages the voice envelopes or any modulation synced to that voice. TipTop consider the ATX1 the best sounding analogue VCO they have ever created.

Size: 8HP - Depth: 40mm / 1.5"
Power: +12V 105mA / -12V 33mA

MIX7 is a seven channel analogue summing mixer module for Eurorack. It is designed for summing any of the different types of signals you'll find in a modular system: Audio, CV, Triggers, or Gate.

MIX7 gives ability to sweeten your mix with more headroom using the power of low noise analogue summing. A compact 3HP Eurorack utility module, MIX7 is an attractive mixing addition to any rig, especially with the ability to also combine rhythms, note patterns or CV automations from different control sources. The main output of one section can be connected to the input of another MIX7 to create larger mixing groups and complex signal routes inside your modular.

The MIX7 summing mixing circuit is built with low-noise operational amplifiers, giving it an excellent sound quality for mixing audio, the beautiful texture of classic analogue mixing with plenty of headroom to handle hot modular signals, and the versatility to sum non-audio signals in your system to open up new creative possibilities.

Each input is labelled with a number of dots, 1-7, yellow for input and green for output. The module matches Tiptop's system look with clean white faceplate styling.

At the back of the module is a user-configurable jumper allowing users to configure the MIX7 for either unity gain (OUT = IN) or give increased headroom (OUT = 0.4IN) for use with hot audio signals, which makes it a great pairing for Tiptop Audio percussive modules. A peak indicator light on the front panel warns the user of even the slightest audio clipping in the mix, helping to keep all the incoming sound sources at their full original quality.

Size: 3HP - Depth: 43mm - Power: +12V 25ma / -12V 20ma

CONTROL PATH is an all in one voice dynamics module that helps build full voices quickly. It contains two analogue envelopes with velocity cv, and one VCA. In a typical voice patch the left envelope will control a filter and the right envelope will be the voice VCA. Velocity control is provided for each envelope and delay front panel trimmers are used to compensate for any miss match between incoming gate signal and velocity CV timings. Envelope cv outs are 0-5V, Velocity cv ins are 0-5V.

Size: 8HP - Depth: 40mm / 1.5"
Power: +12V 50mA / -12V 55mA

The Z2040 is TipTop's redesign of the most famous analogue filter from the polysynths of the 80's and features Tiptop Audio's signature lush, big, and creamy sound. Its frequency sweeps make thick bass lines and leads with great dynamics. When modulated with audio frequencies through its various inputs, the Z2040 gets quite colourful and is capable of creating many new sounds and textures as the forces of the incoming waves and their harmonics blend through the filter's non-linear circuit. When set with Resonance feedback fully up, the Z2040 transforms into a pure sine-core VC-Oscillator, great for making snappy percussive elements and whistling sounds.

A look under the hood will find that the heart of the Z2040 is a discrete design 4-pole low pass filter with a core similar to that of the SSM2040 filter chip, used in the 80's Prophet 5 Rev 2 synthesizer, and its brother the SSM2044, used in the famous early EMU samplers and PPG synthesizers of the 80's. Both filters are considered by many to be, "the best sounding filter ever".

The Z2040's four modulation inputs are built to handle CV and audio signals, enabling deep modulation of the filter core and passing signals. A VC resonance input is provided to modulate and even clip the sine wave produced by the filter feedback loop. A Frequency Modulation input (FM) provides dynamic filter sweeps and the unique VC-FM index allows modulation of the incoming FM signals. On top of that, the Z2040 comes with an audio VCA that can be configured to act upon the input or the output of the filter.

Size: 8HP - Depth: 42mm - Power: +12V 20ma / -12V 20ma

Notes: A serious bargain for anyone putting together a modular system, TipTop bundle three VCOs and the Octopus controller with their mixer, filter, dual envelopes and VCA. Great value.

Supplier's Notes:
The S2 is a promotional bundle that TipTop is offering to users, providing a 33% savings to get you started with ART. With these bundles, TipTop have included an incredible voice: the big, beefy 3 VCO stack. The bundles come in two options: Bundle S1, which uses the ART V/OCT Quantizer as a controller, and Bundle S2, which uses Octopus as a controller. In addition to the controllers, there are three ATX1 analogue oscillators, MIX7 for mixing them with plenty of headroom, and followed by TipTop's beloved 4-pole Z2040 filter that has been with them since day one; it just sounds so good. Finally, we end up with Control Path dual envelope plus VCA dynamics modules. This special price is time limited and while supplies last.

OCTOPUS is a powerhouse ART controller that takes MIDI in via the USB or DIN connector and outputs 8 ART channels with 8 velocity CV plus 8 drum triggers. Together with the ART oscillators the OCTOPUS provide unprecedented simplicity connecting the modular to your computer sequencers, hardware midi sequencers and keyboards. Each ART channel can play polyphonic notes, monophonic notes or create multi-channel polyphony using an internal voice manager. All together OCTOPUS can play more voices and notes from a single controller than ever was possible in modular. Using ART high speed control signals OCTOPUS can maintain low jitter for tight timing. OCTOPUS is TipTop's first ART controller with more to follow, please select between Octopus or ART V/Oct Quantizer to get started with ART. Please note, OCTOPUS is not a 1V/Oct midi to CV and should not be confused as one.

Size: 18HP - Depth: 40mm / 1.5"
Power: +12V 140mA / -12V 100mA

ATX1: a classic all analogue saw VCO core with 3 switchable modes, ART, 1V/Oct, LFO and is recommended as the basic building block for ART systems. It is designed for patching analogue polyphonic synths from discrete modules or multi-mono patches in ART mode. When using ART the ATX1 takes care of the tuning including accounting for temperature changes. In 1V/Oct mode the ATX1 runs as a standard old school modular VCO. LFO mode drops the frequency range and is great for patching vibrato to other ATX1s among other things. The ATX1 outputs variable waveshapes with manual or CV control. Classic FM, PWM and hard sync are provided. A dedicated Gate Out in ART mode manages the voice envelopes or any modulation synced to that voice. TipTop consider the ATX1 the best sounding analogue VCO they have ever created.

Size: 8HP - Depth: 40mm / 1.5"
Power: +12V 105mA / -12V 33mA

MIX7 is a seven channel analogue summing mixer module for Eurorack. It is designed for summing any of the different types of signals you'll find in a modular system: Audio, CV, Triggers, or Gate.

MIX7 gives ability to sweeten your mix with more headroom using the power of low noise analogue summing. A compact 3HP Eurorack utility module, MIX7 is an attractive mixing addition to any rig, especially with the ability to also combine rhythms, note patterns or CV automations from different control sources. The main output of one section can be connected to the input of another MIX7 to create larger mixing groups and complex signal routes inside your modular.

The MIX7 summing mixing circuit is built with low-noise operational amplifiers, giving it an excellent sound quality for mixing audio, the beautiful texture of classic analogue mixing with plenty of headroom to handle hot modular signals, and the versatility to sum non-audio signals in your system to open up new creative possibilities.
Each input is labelled with a number of dots, 1-7, yellow for input and green for output. The module matches Tiptop's system look with clean white faceplate styling.

At the back of the module is a user-configurable jumper allowing users to configure the MIX7 for either unity gain (OUT = IN) or give increased headroom (OUT = 0.4IN) for use with hot audio signals, which makes it a great pairing for Tiptop Audio percussive modules. A peak indicator light on the front panel warns the user of even the slightest audio clipping in the mix, helping to keep all the incoming sound sources at their full original quality.

Size: 3HP - Depth: 43mm - Power: +12V 25ma / -12V 20ma

CONTROL PATH is an all in one voice dynamics module that helps build full voices quickly. It contains two analogue envelopes with velocity cv, and one VCA. In a typical voice patch the left envelope will control a filter and the right envelope will be the voice VCA. Velocity control is provided for each envelope and delay front panel trimmers are used to compensate for any miss match between incoming gate signal and velocity CV timings. Envelope cv outs are 0-5V, Velocity cv ins are 0-5V.
Size: 8HP - Depth: 40mm / 1.5"

Power: +12V 50mA / -12V 55mA

The Z2040 is TipTop#s redesign of the most famous analog filter from the polysynths of the 80's and features Tiptop Audio's signature lush, big, and creamy sound. Its frequency sweeps make thick bass lines and leads with great dynamics. When modulated with audio frequencies through its various inputs, the Z2040 gets quite colorful and is capable of creating many new sounds and textures as the forces of the incoming waves and their harmonics blend through the filter's non-linear circuit. When set with Resonance feedback fully up, the Z2040 transforms into a pure sine-core VC-Oscillator, great for making snappy percussive elements and whistling sounds.

A look under the hood will find that the heart of the Z2040 is a discrete design 4-pole low pass filter with a core similar to that of the SSM2040 filter chip, used in the 80's Prophet 5 Rev 2 synthesizer, and its brother the SSM2044, used in the famous early EMU samplers and PPG synthesizers of the 80's. Both filters are considered by many to be, "the best sounding filter ever".

The Z2040's four modulation inputs are built to handle CV and audio signals, enabling deep modulation of the filter core and passing signals. A VC resonance input is provided to modulate and even clip the sine wave produced by the filter feedback loop. A Frequency Modulation input (FM) provides dynamic filter sweeps and the unique VC-FM index allows modulation of the incoming FM signals. On top of that, the Z2040 comes with an audio VCA that can be configured to act upon the input or the output of the filter.

Size: 8HP - Depth: 42mm - Power: +12V 20ma / -12V 20ma

Notes: Long-awaited update of Jomox's unique take on filtering, step sequencing and effects. Touchpad programming, CV control and deep MIDI integration make the MoonWind a powerful all-rounder.

Supplier's Notes:
Almost 12 years ago, Jomox brought out the first Moonwind. Now it's about time for an improved successor with OLED display, touch pad and more buttons for instant access.

Moonwind MkII is a true analogue stereo filter with built-in step sequencer, a fantastic sounding digital FX chip, two LFOs, VCA, two ADSR envelopes and envelope follower modulation.
Fixed CV in- and outputs and 6 assignable CVs make the Moonwind Mk II a versatile choice even in eurorack environment.

Everything is storable and controllable via Midi.

You can play the Moonwind Mk II like a synth by Midi notes and play melodies on the filters if they whistle in self-resonant mode.

The sequencer is able to control cutoff, Q and resonance per step and filter and thus turns the stereo filter with analogue fed back effects into a creative instrument of its own.

The editing of sequences can also be made via touchpad:

This makes the Moonwind Mk II an easy-to-use and awesome analogue sounding engine that is playable like a synth and can be seamlessly integrated into a DAW recording system

Specifications

Two real analogue low noise multimode filters
OTA technology *
Per filter Q (narrowness) and Resonance are separately adjustable **
Per filter the shapes lowpass, highpass, bandpass and notch are assignable
The filters are connectable among each other***
Per filter there is one LFO with 64 waveforms which controls the cutoff
Per filter there is envelope amount, the envelope is created from the audio with an analogue envelope follower
2 ADSR envelopes for filter and VCA that are triggered via Midi
Inputs are Hi-Z and can amplify guitar or bass signals directly
Touchpad for intuitive editing

2 CV outputs
3 fixed CV inputs
6 programmable CV inputs with amounts
Digital effects chip with 15 algorithms
Analog FX Feedback in order to create tape delays and wave guides
Three parameters per FX algorithm
The effects programs include chorus, flanger, tremolo, reverb, delay and some more exiting programs
Eight effects programs can be reloaded by OS update later on
Built-in noise generator with metallic noise and volume control
Sequencer can record Cutoff, Q and Res separately per step and filter
Maximum 64 steps per pattern
Maximum 32 steps per bar (then max. 2 bars), bars can be dynamically set according to the number of steps per bar
Clock divider can resolve max. 32th per bar
Record/undo function to record filter trails by the rotary knobs or touchpad
Direct Touchmode can record sequences with your fingertip
Sequencer and LFOs are midi clock synchronizeable
Midi notes control the cutoff of the filters, CCs the rest of parameters
Cutoff, Q and Resonance are made as classical potentiometers
Stable metal axis potentiometers and encoders with axle bearings
256x64 px LCD display
OS is updateable via Midi

Dimensions:

Width: 318mm
Depth: 180mm
Height front: 44mm
Height back: 72mm

Weight: 1.8kg

Notes: A powerful MIDI 2.0 controller keyboard, Keystage offers unparalleled control, Polyphonic Aftertouch, MPE compatibility, and exceptional touch response. Enjoy instant OLED visual feedback, a powerful arpeggiator, chord modes, integrated audio outputs, and seamless Ableton Live & Korg Gadget integration. Lightweight & portable, Keystage integrates effortlessly with most modern DAWs and includes a powerful software bundle to amplify your musical journey.

Connect. Create. Perform.

Keystage is a groundbreaking MIDI 2.0 keyboard designed for both producers and stage performers. Pioneering the adoption of MIDI 2.0 Property Exchange, it combines aftertouch with powerful integration and control capabilities.

When inspiration strikes

Eliminate the hassles of lengthy MIDI mapping and missed moments of inspiration. With Keystage, when inspiration hits, your musical visions are captured swiftly and accurately.

As a pioneer in keyboard advancement, Keystage is the first to fully harness the capabilities of MIDI 2.0. Just connect it to compatible software, and watch as Keystage automatically maps parameters, displaying them on its sharp OLED displays. Every display is paired with its unique knob, ensuring you're always informed of the mapped parameters and their precise values.

Expressive creativity

A newly developed semi-weighted keybed provides an immersive playing experience. With polyphonic and channel aftertouch, alongside MPE (MIDI Polyphonic Expression), you can add depth and feel to your performances without your fingers leaving the keys.

An extraordinarily powerful arpeggiator offers features that go well beyond what any other MIDI Keyboard offers. A vast selection of patterns is complemented with unparalleled customisation options, including aftertouch-triggered ratchets, randomization, gating, and more.

In addition, chord mode benefits from a suite of 32 chord sets that can be used out-of-the-box, or customized and saved into any of the extra 32 user set slots. Each set can have one chord assigned to each note of an octave, and chords can even be replayed in different ways, including a strumming mode for realistic guitar-like playing.

Deep integration

Keystage offers immediate, seamless plug-and-play compatibility with most popular DAWs, giving hands-on control on your most important playback/transport controls.

From launch, Keystage supports: Ableton Live (Official Integration), Korg Gadget (Official Integration), Cakewalk, Cubase, Digital Performer, FL Studio, GarageBand, Logic, Pro Tools and Studio One.

On the road and in the studio

Keystage is not just an incredibly powerful MIDI controller. Equipped with direct stereo output, simply connect Keystage to your computer and directly link to the sound system without the need for additional gear that takes up valuable space.

Keystage also offers flexible customization options. You can modify settings directly through the menu or conveniently adjust them using the Korg Kontrol software on your computer.

Keystage includes an expansion plate that can be attached at two different angles, making it ideal for tablets and other devices.

Keystage x Ableton Live

Ableton Live is the industry-standard tool for live performance, thanks to its innovative dual Session/Arrangement view, smooth clip triggering, looping, and powerful production tools.

Keystage offers official integration with Live, putting both transport and device control at your fingertips.

Keystage detects the device currently active in Ableton Live, and automatically maps to the first 8 parameters. When switching devices, Keystage dynamically reconfigures itself for an uninterrupted experience, keeping you in the zone.

Both Ableton Live and Keystage are MPE-compatible, enabling enhanced flexibility and creative possibilities in your music. Live's powerful Drift synthesizer (available with version 11.3) leverages MPE to offer even more expressive capabilities.

Keystage comes bundled with Ableton Live 11 Lite as part of its software suite. Ableton Live 11 Lite is a beginner-friendly version of Live, providing many of the core features to help you kickstart your journey in music creation and performance.

MIDI 2.0

The future of music

MIDI 2.0 is one of the most exciting developments in electronic music production in decades and allows two-way MIDI conversations. Previously, MIDI 1.0 messages went in one direction: from a transmitter to a receiver. MIDI 2.0 is bi-directional and changes MIDI from a monologue to a dialogue.

Thanks to new MIDI-CI (Capability Inquiry) messages, MIDI 2.0 devices can talk to each other, and auto-configure themselves to work together.

Keystage retrieves information such as which Control Change (CC) parameters should be linked and the appropriate names to display for each parameter. This means that Keystage can talk with a wide range of MIDI 2.0 compatible devices and exchange information in both directions. This exciting feature extends not only to software plugins, but also to hardware devices.

MIDI 2.0 Property Exchange is compatible with traditional MIDI DIN cables, allowing Keystage to seamlessly integrate with existing devices. Furthermore, backwards compatibility is not an issue with Keystage: it can still communicate using MIDI 1.0 with devices that do not support MIDI 2.0.

Powerful software suite

Keystage comes bundled with an incredible software set that provides all the tools needed to take your music production to the next level:

Specifications

Keyboard

Polytouch* keyboard
Features velocity sensitivity, aftertouch, and polyphonic aftertouch
Velocity curves: 21 (-10 to +10)
Octave range: 7 (-3 to +3)

Controllers

Pitch bend wheel, modulation wheel, parameter control knobs × 8
VOLUME knob, SETTINGS button, WRITE button, EXIT button, SHIFT button, ARP button, CHORD button, VALUE ^/ buttons, VALUE dial, PAGE i/+ buttons, transport buttons, TEMPO button, OCTAVE i/+ buttons

Display
Main display: Organic EL (electro-luminescence) display
Sub display: Organic EL displays x 8

Scenes: 16

Arpeggiator: Arpeggio rhythm patterns: 20

Chord mode
Preset chord sets: 32
User chord sets: 32

I/O: USB port, MIDI (IN, OUT connectors), EXPRESSION jack, DAMPER jack

Audio output
AUDIO OUT (L/MONO, R): 6.3 mm TS phone jack (unbalanced)
Headphones: 6.3 mm stereo phone jack

Control inputs
Damper (half-damper supported)
Expression

USB: Type B, MIDI/audio interface
MIDI: 1 in/1 out
Audio: 2 ch out
Audio format: 44.1 kHz, 16-bit

Power
USB bus power or AC adapter (9 V DC, : Korg KA350, sold separately)
Power consumption: 5 V/500 mA or less (when powered via USB), 4w (when using an AC adapter)

Dimensions
Keystage-49: 814 × 234 × 82 mm

Included items: USB cable (Type A-Type B), expansion plate, Quick Start Guide

Notes: A new generation of creative KAOSS

KAOSS Replay rewrites the rules of live performance and music creation. Immerse yourself in the fusion of Korg's iconic KAOSS XY pad with unparalleled effects, advanced sampling, playback and powerful controls.

Whether setting the stage alight, weaving sonic magic in the studio, or captivating global audiences via live-stream, KAOSS Replay is your passport to a realm where creativity knows no bounds.

Standalone KAOSS

KAOSS Replay is a self-contained performance tool - an all-in-one solution for musicians, performers, and producers. It features unparalleled KAOSS Pad effects, immersive sample playback and sampling capabilities, and intuitive DJ controls. Powered by USB-C and equipped with broad connectivity, KAOSS Replay offers an effortless and swift setup for stress-free performances without the hassle of intricate rigs.

Building on the iconic legacy of its predecessors, KAOSS Replay introduces an advanced sample playback and sampling system, boasting 128 sample slots (16 pads x 8 banks) for each of up to 100 projects, ensuring uninterrupted hours of KAOSS-fuelled live sets. Housed in a robust aluminium body, its sleek and minimalist design strikes the perfect balance between performance-ready size and backpack-friendly portability.

Unique KAOSS FX

KAOSS Replay has a rich palette of 128 new KAOSS FX; from filters, delays, and reverbs to imaginative and exhilarating modulation effects, loopers, vocoders, and synth effects. Replay offers top-tier vocal effects that effortlessly complement any genre and performance, ranging from subtle vocal correction to precise pitch tuning, marking a ground-breaking first in the KAOSS series.

Automating your effects is effortless with the PAD MOTION function, or by holding the desired position using TOUCH HOLD mode. The FX Release function ensures smooth transitions, seamlessly integrating your effects into your musical composition.

With a dedicated MIC Input, KAOSS Replay simplifies the process of playing and performing tracks and allows for engaging improvisation with exhilarating effects like never before.

Beyond effects

KAOSS Replay simplifies and streamlines the process of playing, sampling, or re-sampling. 16 high quality velocity-sensitive pads accommodate 128 slots divided across 8 banks per project. Replay supports up to 100 projects, which can be stored on a microSD card for effortless data management.

Enhanced by a dual group assign system and dedicated faders, along with BPM detection, sync, and quantization capabilities, KAOSS Replay provides a comprehensive toolkit for a seamless performance experience. What's more, the onboard sample trimming functionality, coupled with the 12-point Hot Cue triggering system, enables samples to be truly "played" during live performances, opening up a world of dynamic possibilities.

Creativity at your fingertips

At the heart of KAOSS Replay sits a stunning 5-inch full-colour OLED touchscreen. Whether manipulating effects, editing samples, or navigating menus, its tactile display offers a seamless and satisfying experience.

Combined with its function-dedicated buttons, knobs, faders, and sample pads, KAOSS Replay is an immersive and engaging performance tool for all musicians.

Live performance creativity

Sampling and resampling have always been core features of the KAOSS Pad series, and KAOSS Replay takes this capability to new heights. Choose a target pad, set the desired number of measures, and start capturing your samples effortlessly. Whether you're connecting external instruments via the AUDIO IN or recording your voice through the dedicated MIC Input, Replay provides a versatile canvas for your creativity.

Edit your samples, apply effects, assign hot cues, resample... the options are limited only by your imagination. Moreover, KAOSS Replay supports real-time recording of your performances, ensuring that those moments of real-time magic are captured.

The ultimate portable performance rig

KAOSS Replay simplifies the art of performance. Ultra-portable and ready to go within seconds, Replay eliminates the need for external gear. Precise beat-matching, playback quantization, hot cues, monitoring, and dual faders, are all complemented by the formidable KAOSS FX, making KAOSS Replay a performance powerhouse.

Controller and interface

KAOSS Replay excels both inside and outside the studio. Its remarkably flexible MIDI Surface mode offers complete customisation, transforming it into a highly adaptable MIDI controller. It can even serve as a USB plug-and-play audio interface, seamlessly integrating into your production studio setup.

Specifications

KAOSS Pad effects: 128 types. Tone, delay, reverb exclusive for microphone.
Trigger pads: 16 velocity sensitive x 8 banks
Projects: 100
Hot cue: Max 12 (per trigger pad)
Simultaneous plays: 16 Audio Linear PCM (48 kHz/16 bits)
Recording Sampling, resampling (30 mins); Live rec (100 min)

Audio input
LINE/PHONO IN jack: RCA pin jack (Select LINE or PHONO.)
PHONO GAIN switch (LO/HI)
MIC IN jack: Standard phone jack (6.3 mm, monaural TS)
AUX IN jack: Stereo mini jack (? 3.5 mm)

Audio output
LINE OUT jack: RCA pin jack
HEADPHONES jack: Standard stereo phone jack (6.3 mm)
Controller input: Standard phone jack 6.3 mm, TS)
USB / MIDI USB microB (MIDI, Audio (IN x 2ch, OUT x 34ch (48 kHz/16 bits)); MIDI IN/OUT (DIN 5pin)

External storage: microSD card, microSDHC card (32GB Max)
* Class10 or higher, UHS-I (U1) recommended
Dimensions: 185 (W) x 284 (D) x 56 (H) mm
Weight: 2kg
Power supply: DC 5V/3A
Included accessories: AC adapter, USB cable (Type A to microB, 1m) microSDHC card

Notes: ***B-STOCK: Box opened, product in perfect working order***


USTA is a 4×4 tracks sequencer for voltages and gates with variable stage duration, designed to quickly see and edit multiple voltage relationships in real time.

Variable stage duration means that every single stage duration can be individually set in relation to the clock, instead of being constrained to a one-to-one ratio (i.e. one stage per every clock impulse).

4×4 tracks means that every stage can store and generate up to four separate voltages (two CVs and two gates), and that up to four independent stage sequences can be arranged into as many different tracks.

Its architecture is based on an array of 16 'Stages' which form a 'Pattern'; 16 patterns form a 'Track', and four tracks form a 'Project'. Within each track, each stage can provide two gates and two CVs, and a wide set of options is available to define and modify the value of each output ('Layers') and the way it is played ('Colours').

Every Stage is related to a dedicated stepped encoder for quick and intuitive editing, and all the 16 encoders are arranged in an oval layout with a circular playhead. Every encoder is surrounded by a ring of 16 LEDs and a RGB led, to provide a visual feedback of the current setting of that step basing on the layer you are working on (like raw CV, quantized CV, length, gate...) and the way it should play depending on the RGB colour.

Notes: ***B-STOCK: Box damaged, product in perfect working order***


The Heart and Soul of Modular Synthesis:
The Pittsburgh Modular Synthesizers Lifeforms SV-1 is a complete dual oscillator synthesizer, designed to be the core of your eurorack modular system. Building on the sound and legacy of our celebrated Waveforms oscillator, the SV-1 module features two full-range independent analog oscillators; sound sources that are perfect for dynamic and inspired performances. In addition to these two high-performance oscillators, we stuffed the SV-1 with a perfectly curated set of modular synthesis tools including dual, chained mixers, a plucky, four stage envelope generator, and of course, our legendary analog state-variable filter.

The Lifeforms SV-1 is a synthesizer powerhouse, providing absolutely everything you need to create gigantic and iconic synth sounds: roaring bass, shimmering leads, lush pads and warm drones are only a few knob turns away. Instantly, out of the box, a rich feature set with a fluid, easy to understand interface empowers you to create vibrant, thick tones. Modulation and Tools sections fill out the analog SV-1 modulation capabilities with a triangle and square LFO, two sub-octave oscillators chained to the main oscillator, and noise with sample & hold.

Your Sound, Your Way:
Pre-patched under the hood, patch cables are not necessary to get started. But as soon as you begin patching, you will feel the power provided by the 53 patch points and 21 knobs. By breaking each feature of the synthesizer out with patch cables, a tremendous amount of flexibility and control emerges to patch up any sound your imagination can dream up. All the tried and true analog classics are there at your disposal: sine, sawtooth, triangle and square. In addition, our exclusive and powerful blade wave on Oscillator 1 adds a unique weapon to your sonic arsenal. Deep modulation options award you complex control of nearly every function of the SV-1.

A Team Player:
We've designed the Lifeforms SV-1 to be the perfect centerpiece of any eurorack synthesizer regardless of size. In a smaller system, the SV-1 provides a wide variety of synthesis options through a hefty set of synthesis tools. Combined with a larger collection of modules, you can unlock never-before-heard expressiveness and unparalleled control over the rich feature set of the SV-1. The ability to patch and integrate the SV-1 with other existing eurorack compatible gear gives you truly infinite modulation and expansion options.

Feature Set/Comparison:
Audio Source:
Lifeforms SV-1 - 2 Oscillators: 5 waveforms + 2 sub octaves and 4 waveforms, respectively
Moog Mother-32 - 1 Oscillator: 2 waveforms
Make Noise 0-Coast - 1 Oscillator: 2 waveforms

Patchability:
Lifeforms SV-1 - 53 patch points (20 in, 32 out, 1 dual purpose). Fully modular (all section in/out points accessible separately)
Moog Mother-32 - 32 patch points (18 in, 14 out). Semi-modular (some section in/out points inaccessible)
Make Noise 0-Coast - 27 patch points (14 in, 13 out). Fully modular (all section in/out points accessible separately)

Mixing:
Lifeforms SV-1 - 4 channel mixer, splittable into 2x2 channel mixers
Moog Mother-32 - 2 channel mixer
Make Noise 0-Coast - Ext. audio input

Sound Shaping:
Lifeforms SV-1 - 3-state variable filter (Low/High/Bandpass)
Moog Mother-32 - 2-state variable filter (Low/High)
Make Noise 0-Coast - Additive synthesis (wavefolding, overtones), no filter

Modulation:
Lifeforms SV-1 - 4 stage ADSR, 2 multi-waveform LFOs, 2 noise sources + smooth and stepped S&H
Moog Mother-32 - 2 stage AD + Sus. switch, 1 multi-waveform LFO, 1 noise source
Make Noise 0-Coast - 3 stage ASD, 1 dual-purpose AD/LFO, S&H + offset

*For audio demos, please visit - http://www.lifeformsmodular.com/sv-1/

Notes: ***B-STOCK: Box damaged, product in perfect working order***


***Now featuring Assimil8or Software Version 2.0! Available to download here: http://www.rossum-electro.com/products/assimil8or/

The ASSIMIL8OR is a CV/Gate-controllable sampler with eight independent channels. Each channel is not only its own voice, but also has a separate audio output and a gate/trigger and three CV inputs. Given ever get two sample inputs and main outputs. Thus, Stereo Sampling and playback is possible. Mixed operation of stereo or mono is possible and is limited only by the maximum number of eight channels or parts.

The ASSIMIL8OR works with high-quality 24-bit AD and DA converters. Internally, however, sample and bit rate for lo-fi sound can be lowered, the latter is even CV-controllable. The samples can also be otherwise manipulated in many ways. Thus, the phase of a sample via CV or a different sample can be modulated. Likewise, the loop points can be controlled and the sample can be traversed with CV control (scrubbing), whereby wavetable similar effects could be achieved. The following parameters can be addressed via the gate / trigger and CV inputs:

- Pitch
- Level
- Bit Depth
- Phase Modulation
- Pan
- Scrub
- Sample Start
- Sample Length
- Loop Start
- Loop Length
- Release Decay

Samples and presets are stored on an SD card, which is easily accessible plugged into the module front.

Notes: ***B-STOCK: Box opened, slight surface marks, manual and software missing, otherwise in perfect working condition ***


Renowned ESS Sabre32 Ultra DAC technology:
New in the 828es, renowned ESS Sabre32 DAC technology delivers 123dB dynamic range and the same proven, award-winning audio quality as MOTU's flagship 1248.

Ultra-low latency and renowned rock-solid performance:
Round-trip latency (RTL) performance as low as 1.6 ms at 96kHz over Thunderbolt with high-performance DAW hosts.

USB and Thunderbolt for Mac, PC and iOS:
Connects to your Mac or PC with Thunderbolt, hi-speed USB 2.0 or AVB/TSN Ethernet for up to 256 audio channels (128 in and 128 out). Class-compliant firmware and industry standard drivers work with any audio apps. Connects to iPad with a standard camera connection kit (adapter).

Cutting-edge components deliver ultra-transparent sound:
Capture your recorded material in its truest, most natural form with -108 dB THD+N, 118dB dynamic range and -128dBu EIN performance. Each mic channel has individual preamp gain, pad, 48V phantom power and digital remote control. Do you work with outboard EQs and compressors? Each 828es mic input offers a pre-converter, hard-wired send for mono or stereo mic channel outboard processing.

Control room features:
Take control of your recording sessions with the built-in talkback mic and front-panel talk button. Connect two sets of speakers and check your mixes instantly with front-panel A/B speaker select buttons.

Console-style mixing with 48 channels and 12 busses:
A full-fledged 48-input digital mixer delivers 7 stereo aux busses, 3 groups, access to 64 network inputs, and DSP effects including reverb, 4-band EQ, gate and compression. If you know your way around a large-format mixing console, you'll feel right at home. If you've ever wished to mix on a large console, the driver's seat is now yours.

Vintage processing with 32-bit float precision:
Classic reverb. Compression modelled after the legendary LA-2A compressor. EQ modelled after British analog console EQs. The 828es DSP engine delivers virtually unlimited headroom and the utmost in sound quality.

Route your audio anywhere with one-click ease:
Send any input to any output, or multiple outputs. Includes routing to and from the computer, plus any devices on the audio network.

Control everything from your laptop, tablet and smartphone:
The software that you use to control the 828es doesn't reside on your hard drive. It's a web app served from the hardware itself. This means you can control the 828es on-board DSP, mixing, device settings, and network audio routing from your favourite web browser on a laptop, tablet or smartphone connected by wire or Wi-Fi to your local area network. Use any web client on any platform - Mac, Windows, Linux, iOS, Android - as long as it shares the same network.

No computer or laptop needed:
Connect an Apple Airport or other Wi-Fi router with a standard Ethernet cable for wireless control of device settings, powerful 48-channel mixing and DSP effects.

MOTU interfaces are built to last:
Like all MOTU interfaces, the 828es aluminium alloy chassis is lightweight, yet incredibly sturdy and durable, and designed to withstand the rigors of the studio, stage, and tour bus. In a world awash with cheap plastic, the solid feeling of the 828es metal exterior in your hands is a reassuring reminder that you are holding quality engineering and construction.

Notes: ***B-STOCK: Box opened, light surface marks, product in perfect working condition ***


Seaboard RISE is the world's first truly accessible expressive MIDI controller. It establishes a new standard in music-making devices by combining the intimacy of acoustic instruments with the versatility of electronic music. Paired with Equator, our powerful software synthesiser, the Seaboard RISE unlocks unprecedented creative possibilities for contemporary musicians in a joyfully-crafted evolution of the keyboard.

The Seaboard RISE marks a turning point in the accessibility of Expressive MIDI products to a broad consumer market. It is the first Expressive MIDI device to offer an easy-to-use multi-platform synth, the first with an integrated user control panel, and the first to perform wirelessly with an integrated battery and Bluetooth over MIDI.

Accessible:
Start in piano mode and then explore new dimensions of touch interaction
Begin with even the most basic keyboard technique and grow from there
Customise sensitivity to match your own playing style

Versatile:
Use with a variety of software and hardware synthesisers as well as the Equator bundle included with RISE
Simulate the authentic dynamic range of any instrument to breathe new life into your favourite sounds
Personalise patches using the touch- sensitive trackpad and faders

Expressive:
Create new sonic possibilities by mapping sound parameters to unique gestures
Perform and record tracks with subtle and sensual details that previously required post-production
Push the boundaries of music with an instrument that marries tradition with innovation

Intimate:
Free yourself from cables using built-in MIDI over Bluetooth with up to 8 hours of continuous play
Enjoy the craftsmanship of a world-class instrument made of the best materials and built to last
Touch and shape sound timbres in an astonishingly direct and intuitive way

***Now comes with powerful, approachable new Tracktion Waveform software, providing excellent integration with multidimensional polyphonic instruments:

Waveform offers a plug-and-play experience for ROLI's Seaboard and BLOCKS instruments. Setting it apart from other DAWs, it seamlessly receives complex MPE data and has a user interface that helps musicians visualize and edit all of the expression parameters of MPE on multiple tracks all at once. Waveform builds on the legacy of previous Tracktion DAWs in providing production tools that are approachable to untrained musicians but also valuable to the workflows of professionals.

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


Updated version of Korg's excellent Wavestate, drawing on the iconic Wavestation synth to create a modern take on wavetable synthesis, now with added polyphony.

Supplier's Notes:
Wavestate mkII

Extended polyphony. Extended possibilities.

Korg's legendary Wavestation introduced the world to wave sequencing, and the 37-key Wavestate mkII builds on that legacy with a reimagined, compact synth designed to satisfy today's demanding musicians and producers. MkII expands polyphony to 96 stereo voices and adds a fresh look. It's completely compatible with sounds and samples for the original Wavestate.

Overview

Korg's legendary Wavestation introduced the world to Wave Sequencing, transforming raw samples into sounds that no-one had ever heard before. The flagship OASYS, Kronos and Nautilus keyboards developed Wave Sequencing even further, expanding on its unique palette of lush, evolving pads and driving rhythms.

Now, Korg is proud to present the new Wavestate mkII, with improved polyphony (96 stereo voices) and a fresh look. It's completely compatible with sounds and samples for both the original Wavestate, Wavestate SE and Wavestate Native software, including many excellent third-party libraries. Updated sounds and software keep it fresh and the compact form-factor, with 37 full-size keys, still transports easily and fits neatly into any stage, studio, or desktop setup.

Keyboard: 37-keys, velocity sensative
Sound generation: Wave Sequencing 2.0
Polyphony: 96 stereo voices
Configuration: Performance: 4 layers, reverb, EQ
Layers: Program, Arpeggiator, Key, and Velocity Zones
Programs: Wave Sequence, Filter, Amp, Pre FX, Mod FX, Delay
Presets: 261 Performances,799 Programs, and 1042 Wave Sequences
Controllers: MOD wheel, PITCH wheel, Vector Joystick, 8 x program/Performance Mod knobs.
Effects: Pre FX x4, Mod FX x4, Delay x4, Reverb, Performance EQ

Inputs/outputs:

Audio Outputs L/MONO, R (6.3mm TRS phone jack, impedance balanced)
Headphones (6.3mm stereo phone jack)
Damper (6.3mm phone jack)
MIDI in,out
USB Type B

Power: AC adapter (DC12V, 2500mA)
Power consumption 5w
Dimensions: 565 W x 338 (D x 92 (H mm
Weight: 2.9kg

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


A smaller, more affordable version of the excellent Hydrasynth Keyboard. Advanced wavetable synthesis with 8-voice polyphony, hands-on control and an excellent keybed with polyphonic aftertouch.

*** New 2.0 Firmware update for all Hydrasynth models - March 2023 ***

This is a free of charge update for all current and new users of Hydrasynth. The biggest news in this update includes:
Expanded memory to 8 banks (Keyboard, Desktop, and Explorer only)
NEW modulation source: VOICE MODULATOR
OSC Bit reducer
LFO quantizer
ENV quantizer
LFO Step Advance
Global FX bypass
Increased Vibrato resolution
New Sustain pedal options including Sostenuto
More LED options
Glissando in glide options
Arp Range goes to 6 octaves
Arp Step Offset parameter
More Rand/Init shortcuts (all STEP LFO steps, Wavescan waves, Voice mod offsets)
Local On/Off saved
......And more!
This is the first major update to the Hydrasynth family in a little, which adds a tonne of new features.


Supplier's Notes:
The ASM Hydrasynth Explorer takes the now legendary Hydrasynth into new territories. The Hydrasynth Explorer offers the same 8-voice sound engine as the Hydrasynth Keyboard and Desktop, but in a compact and portable battery powered form factor. The 37-note mid-sized PolyTouchr keybed features polyphonic aftertouch, offering great playability and expression but in a reduced footprint. The extremely deep yet easy to use sound engine features the famous WaveScan oscillators, Mutator waveshaping, flexible dual Filter section, 32-slot modulation matrix, and dual Insert and dual Master effects allowing a lifetime of sonic explorations. The CV/GATE outputs provides for easy integration with equipment such as modular synthesizers and the USB MIDI and full-sized MIDI DIN connectors takes care of standard connectivity without the need for special cables. The ASM Hydrasynth Explorer can also be powered by 8xAA batteries for true on-the-go mobile operation. Simply put, this is one very powerful compact-sized synthesizer and controller all-in-one for the modern musician.

Tech Specs

Type: Polyphonic Wave Morphing Synthesizer
Sound Engine Type(s): Wavescan
Analog/Digital: Digital
Number of Keys: 37 mid-sized keys
Type of Keys:ASM POLYTOUCH Polyphonic Aftertouch Keyboard, On/Off Velocity-sensitive
Other Controllers: Pitch Bend, Mod Wheel
Polyphony: 8 voices
Number of Presets: 640
Oscillators: 3 x Wavescan oscillators (219 Waveforms), 4 x Mutator wave shapers (8 Types), Noise (7 Types)
Mutators: 8 Types (FM-Lin, WaveStack, PW-Orig, PW-Squeeze, PW-ASM, Harmonic Sweep, Hard Sync, PhazDiff)
Noise: 7 Types (White, Pink, Brown, Red, Blue, Violet, Grey)
LFO: 5 per Voice (Sine, Triangle, Saw Up, Saw Down, Square, Pulse27%, Pulse13%, S&H, Noise, Random, Step), Tempo syncable, Semitone Lock
Envelopes: 5 per voice, Tempo syncable, Variable trigger sources
Filter Types: 1 Multimode Filter (16 types) and 1 Variable LP-BP/Notch-HP filter, series or parallel routing
Filters: Filter 1 (LP Ldr12, LP Ldr24, LP Fat12, LP Fat24, LP Gate, LP MS20, HP MS20, LP 3-Ler, BP 3-Ler, HP 3-Ler, LP Stn12, BP Stn12, HP Stn12, LP 1 Pole, LP 8 Pole, Vowel), Filter 2 (LP-BP-HP, LP-Notch-HP)
Effects: 9 Insert Effects, 5 Delays, 4 Reverbs.
Effects Types: Chorus, Flanger, Rotary, Phaser, Lo-Fi, Tremolo, EQ, Compressor, Distortion, Delay, Reverb
Arpeggiator: 8 types (Up, Down, Up&Down, Up/Down, Order, Random, Chord, Phrase)
Other: Mod Matrix (32 slots), Macro Controllers (8), Favorites (32), Randomizer (Patch and Module), MPE Compatibility, Warm Mode, Microtuning
Audio Outputs: 2 x 1/4" Balanced (L/Mono, R)
Headphones: 1 x 1/4"
USB: 1 x Type B
MIDI I/O: In/Out
Pedal Inputs: 1 x 1/4" (sustain)
Other Outputs: 5 x 1/8" Outputs (CV, Gate, Mod1, Mod2, Clock)
Power Supply: 12V DC switchable power supply
Height: 2.28" / 5.8cm
Width: 21.81" / 55.4cm
Depth: 9.72" / 24.7cm
Weight: 7.63lbs / 3.46kg
MPN: HSMK

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


Eurorack version of 1010's superb Bluebox. Vast power in 30 HP, with the ability to mix, record and play back in mono and stereo, hook up to a computer over USB for stereo I/O and run effects, all with CV control.

Supplier's Notes:
The bluebox Eurorack edition is the new Eurorack mixer with effects and multichannel recording/playback based on the award-winning bluebox desktop mixer. With the Eurorack edition's USB-C EXT port, you can send 2 channels of audio to and from your computer. Plus, you can control up to 6 mix settings with the 6 CV inputs. Whether recording your Eurorack jams, using it to play stems as backing tracks, or a combination of both - bluebox Eurorack edition will rock your rack!

Connect your eurorack, sampler, drum machine, and synthesizer outputs to 12 mono, 3.5 mm inputs and map them to 12 mono tracks or 6 stereo tracks - all with independent control for recording and playback. Connect your computer to the USB C port to send and receive two channels of audio.

The bluebox Eurorack edition is the ultimate in compact mixing, effects, recording, and playback for Eurorack. Smack it in your rack and hit the road with a self-contained, electronic music powerhouse!

When you purchase a bluebox Eurorack edition, you will receive:

a bluebox Eurorack edition 30 HP Eurorack module
A microSD card with bluebox firmware and pre-loaded project files
two Eurorack power cables
a bluebox Eurorack edition Quick Start guide
two MIDI Adapters

Technical Specs

Dimensions & Power
30 HP
Module dimensions including knobs: 6" x 5"x 1.6"
Depth behind front panel with ribbon cable: 1.0"
Requires the +5V rail which may not be present
on some older racks.
Uses 500-850mA at +5V (depending
on screen brightness), 320 mA at +12V, and 82mA at -12V
Requires two power connections
Capabilities
12 mono tracks, 6 stereo tracks or something in between
Connect to TRS or USB C MIDI for beat syncing effects
Lots of headroom with support for Eurorack levels up to +/-5V inputs and outputs
3 effects: reverb, delay and compressor
Records and plays back 48k, 24-bit audio WAV files
4 band EQ per track
Durable aluminum faceplate
Stream 2 channels of audio in and out over USB C

Inputs and Outputs
12 mono 3.5 mm TS inputs
2 independently controlled 3.5 mm TS output pairs that can be used as 4 mono outputs
1 stereo 3.5 mm headphone output
6 CV Inputs
1 USB C MIDI Device port
1 TRS MIDI Input
1 TRS MIDI Output
1 USB C Ext jack for streaming audio
3.5" touch screen, 4 knobs, 8 navigation buttons and 3 transport buttons

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


This long-awaited FM voice module from Jomox is a self-contained synth in Eurorack format, patchable and compatible with other modules but capable of creating eight-voice polyphonic patches all on its own. Vastly powerful.

Supplier's Notes:
The Mod FM is a completely self-contained 8 voice FM synth in eurorack format, which can create powerful sounds out of the box without lacking the commonly provided CV modulation possibilities.

It provides 4 Operators and 2 LFOs/VCOs per voice. Additionally it has 2 analogue filters and analogue VCAs per voice which apply analogue warmth and depth to the Mod FM, although the FM engine is digital of course.

Each voice has own CV/Gate inputs and an individual output. There is a mix output which separates even and odd voices. Here you can mix internal effects like delay and reverb to the stereo output signal.

Next to the CV/Gate control, the Mod FM has Midi in and out in TRS type A format and a USB C connector which handles Midi too.

Even without diving too much into complicated modular setups you can create extremely good sounding and metallic FM sounds, snappy bases but also soft and deep sounding analogue style sounds.

Furthermore, the Mod FM offers a variety of external cv modulations in order to e.g. modulate each operator individually or control the FM envelopes.

The Mod FM is fully multitimbral, i.e. each voice can play an own sound in Multi Mode which gets stored as a complete multi set (not only vectorized). That is, you can copy a single sound to the desired multi, but editings made on that particular multi get stored along with the multi set.

Hence, we have the biggest advantage of the hybrid approach:

Modular is great but can be very complex, and you might be trapped in a system where you never reach again the desired sound of the latest session. Storability certainly helps.

The different sections in more detail:

Matrix FM:

4 operators are arranged in a matrix, in which every operator (= sine oscillator) can be modulated by each one of the other three.

The 16 endless potentiometers of the matrix adjust the modulation amount (FM amt) and the base frequency of the operators.

For each operator you can change the base frequency by the diagonal knobs.

There are several overtone modes that determine if one operator is controlled by the keynote (or CV) = base operator, or if it's locked in as overtone (= overtone operator) to the assigned base operator. For the base operator, the number resembles xxx semitones added to the keynote.

For the overtone operator, the adjusted number is the xxx = Nth overtone or harmonics to the base operator frequency.

The locked overtone operator tracks the base operator and is still able to modulate and being modulated.

Each operator has an ADSR envelope. This envelope can also be used to frequency-modulate the operator.

Algorithm:

The algorithms from the known FM synthesis are actually special cases to the whole matrix.

Because it gets pretty quickly uncontrollable if you turn all the knobs because of the feedbacks, Jomox have decided to implement the algorithms. There are 26 algorithms, that are derived from the DX9 with its 4 operators.

At this menu it's even possible to change the frequency mode of each operator to a fixed frequency that is edited in single Hz and which does not follow the keynote, but only modulation. That makes sense for e.g. percussive sounds.

LFO/VCO:

Each voice has 2 LFOs which can modulate either the frequency (FM) or the amplitude (AM) of an operator. Every LFO addresses 64 different wave forms that are displayed in the right OLED display.

There is another feature: each LFO can be switched into a VCO that covers the whole audio range. You can even mix it into the signal chain and it tracks to the keynote. The former LFO rate parameter turns into a detune parameter. That is, you can create classic sounding rectangle/sawtooth analogue basses or string pads - and much more of course.

Filter:

Each voice contains an analogue filter which is build up with the chip SSI2140 from Sound Semiconductor, which is an improved modern version of the old SSM2040, designed by Dave Rossum, and which had been used in Oberheim synths and the early SCI Prophet-5.

The filter has a classic 24dB output and a 12dB state-variable multimode-filter. The three basic characteristic outputs LP/BP/HP can be cross-faded continuously with one parameter called shape.

Both filter outputs 24dB/12dB can be mixed independently.

The ADSR for the filter is fast and cuts in very quick and directly, the resonance is well adjustable.

The filter section contains an own LFO for the cutoff which is independent from the digital sound engine and has also 64 waveforms.

The VCA is a fast transistor-VCA which is important for snappy sounds. The same transistor-VCA is used in all Jomox drum products. Therefore the ModFM can be used as a rich source for technoid drums and percussions of any kind.

Notes: ***B-STOCK: Box damaged, product in perfect working order***


Updated version of Korg's excellent Wavestate, drawing on the iconic Wavestation synth to create a modern take on wavetable synthesis, now with added polyphony.

Supplier's Notes:
Wavestate mkII

Extended polyphony. Extended possibilities.

Korg's legendary Wavestation introduced the world to wave sequencing, and the 37-key Wavestate mkII builds on that legacy with a reimagined, compact synth designed to satisfy today's demanding musicians and producers. MkII expands polyphony to 96 stereo voices and adds a fresh look. It's completely compatible with sounds and samples for the original Wavestate.

Overview

Korg's legendary Wavestation introduced the world to Wave Sequencing, transforming raw samples into sounds that no-one had ever heard before. The flagship OASYS, Kronos and Nautilus keyboards developed Wave Sequencing even further, expanding on its unique palette of lush, evolving pads and driving rhythms.

Now, Korg is proud to present the new Wavestate mkII, with improved polyphony (96 stereo voices) and a fresh look. It's completely compatible with sounds and samples for both the original Wavestate, Wavestate SE and Wavestate Native software, including many excellent third-party libraries. Updated sounds and software keep it fresh and the compact form-factor, with 37 full-size keys, still transports easily and fits neatly into any stage, studio, or desktop setup.

Keyboard: 37-keys, velocity sensative
Sound generation: Wave Sequencing 2.0
Polyphony: 96 stereo voices
Configuration: Performance: 4 layers, reverb, EQ
Layers: Program, Arpeggiator, Key, and Velocity Zones
Programs: Wave Sequence, Filter, Amp, Pre FX, Mod FX, Delay
Presets: 261 Performances,799 Programs, and 1042 Wave Sequences
Controllers: MOD wheel, PITCH wheel, Vector Joystick, 8 x program/Performance Mod knobs.
Effects: Pre FX x4, Mod FX x4, Delay x4, Reverb, Performance EQ

Inputs/outputs:

Audio Outputs L/MONO, R (6.3mm TRS phone jack, impedance balanced)
Headphones (6.3mm stereo phone jack)
Damper (6.3mm phone jack)
MIDI in,out
USB Type B

Power: AC adapter (DC12V, 2500mA)
Power consumption 5w
Dimensions: 565 W x 338 (D x 92 (H mm
Weight: 2.9kg

Notes: ***B-STOCK: Box opened, product in perfect working order***


Two-deck version of Denon's standalone controller, based on the Engine DJ OS, featuring WiFi streaming and Serato support. Built-in speakers allow quick and easy monitoring for live streaming or practice sessions.

*** Engine DJ 3.1 Performance Software for Hardware (OS) - Update June 2023 ***

New Features

Touch FX - Use the touchscreen to control and interact with FX in a whole new way. Touch FX bring powerful effect combinations to your fingertips. Swipe in any direction to instantly create build-ups, drops, and transitions. The added ability to latch Touch FX allows you to focus on other aspects of your mix while the effect remains active. Touch FX are available for all Engine DJ devices, including Media Players, however, the selection of available Touch FX will vary by the device.

New Touch FX include: Filter Echo, Filter Reverb, Filter Roll, LFO Echo, Filter Dub Echo, Filter Gate, Noise Gate, Flanger, LFO Filter, Filter

New Main FX - Denon DJ devices receive 26 new and updated Main FX. This suite of new dynamic effects provides DJs with easy-to-use tools to build energy, create drama, aid with transitions, and individualize their performances.

New Main FX include: Echo Out, Swell Verb, Hold Echo, Recycler, Stutter Out, Riser, Pitch Down, Scale Down, Reverb, LFO Verb, Reverb Drop, Reverse Reverb, Reverb Rise, Flanger (-), Beat Break, Backspin, Brake, Roll

All effects now offer a Frequency parameter, allowing you to apply the effect to a focused frequency range.

Sampler Updates

Sampler audio can be routed to any available channel or the Main output. To change the Sampler routing, open Settings and choose the Mixer tab.
The Sampler pad mode can now also be accessed by pressing the ROLL pad mode button twice without holding the Shift button. (Denon DJ hardware)
The sampler volume setting is now remembered between power cycles.
Added the ability to read Smartlists created in Engine DJ (Desktop).

Improvements and Fixes

Track Preview can now be routed directly to the headphones for instant track previews without setting the cue source in advance. (PRIME 4)
Reworded Effect parameter reset behavior setting to make it clearer.
Fixed an issue where the Date Added field was incorrectly setting newly added tracks as the day before.
Fixed an issue where the internal SATA drive would not show up as a source immediately after updating.
Fixed an issue where a track remained in the Prepare list when loading to a deck in certain situations.
Improved peak hold behavior on all products that have peak hold VU meters.
Other various stability enhancements & improvements

Engine DJ Preparation Software (Desktop)

New Features

Smartlists - Automatically organize songs from all connected drives into playlists based on the criteria or rules that you specify. To create a Smartlist, click the Smartlist icon on the Collection folder or right-click on an existing Playlist and select 'Create Smartlist'. You can easily turn a Smartlist into a regular playlist by right-clicking the Smartlist and choosing 'Convert to Playlist'. This creates a Playlist with the same name & content as the Smartlist.

Improvements and Fixes

Fixed an issue that prevented the highlighted track from updating when bulk editing metadata.
Fixed an issue where the Date Added field was incorrectly setting newly added tracks as the day before.
Fixed an issue where Serato beat grids were not imported correctly.
Other various stability enhancements & improvements

Supplier's Notes:
Denon DJ, the leader in standalone DJ products and innovation, introduces the SC LIVE 2, a 2-Deck Standalone DJ Controller with 7" touchscreen, built-in speakers, and Wi-Fi connectivity. This club-style, all-in-one device gives DJs ultimate creative freedom and offers the world's first DJ hardware integration with Amazon Music Unlimited.

World's First Amazon Music and Denon DJ Partnership

The Denon DJ SC LIVE DJ controllers were designed using an exclusive secure chipset to meet Amazon Music's streaming requirements, making them the world's first DJ hardware to support Amazon Music Unlimited. This integration with Amazon Music and other popular streaming services gives DJs instant access to over 90 million CD quality (aka "lossless") songs across all musical genres. With the SC LIVE 2's built-in Wi-Fi and lightning-fast onboard song analysis, DJs can now perform a full set without owning or preparing any music ahead of time.

Laptop-Free Performances with Engine DJ OS

The SC LIVE 2 is powered by Engine DJ, the same leading standalone DJ operating system that fuels laptop-free performances on the biggest stages and DJ booths across the globe. This seamless hardware and software integration intuitively places performance essentials in the perfect place for inspirational mixes and live shows.

Ultimate DJ Controller for Serato DJ and Virtual DJ

With "Computer Mode" enabled, the SC LIVE 2 can be used as a dedicated DJ software controller for Serato DJ Lite, Serato DJ Pro, and Virtual DJ. This 1:1 hardware to software integration displays moving waveforms and music library information on the HD touchscreen and provides full access to FX and other top features. This versatility gives DJs multiple options to perform however they prefer.

Designed for Creative Mixing

The SC LIVE 2 gives DJs the power to perform anywhere with 2-deck standalone freedom and wireless access to Amazon Music Unlimited. This combination of performance features and unprecedented musical access opens an exciting new realm of creative mixing possibilities for laptop-free DJ performances. Inheriting the professional club-standard layout, features, and intuitive workflows from Denon DJ's flagship SC6000 PRIME media players and club-style mixers, the SC LIVE 2 fuses the power of the club-ready modular setup into a compact & intuitive 2-deck standalone DJ controller. With its built-in Wi-Fi, 7" multi-gesture touchscreen, and 3 media slots, the SC LIVE 2 unleashes creative live performances using a combination of stored media and music streaming sources.

For on-the-fly creative mixing, the 4 Performance Pads on each deck can be used to control Hot Cue, Roll, Auto Loop, and Manual Loop modes. When the Bank button is pressed, the 4 Performance Pads access pad slots 5-8, allowing a total of 8 Performance Pads on each deck for each Pad Mode option. The onboard effects include 4 Sweep FX which utilize a dedicated knob on each channel to expressively control FX and Filter combinations. The 13 BPM FX options can be customized for extra sonic satisfaction using the FX control section that includes a Channel Assignment switch, Time/Parameter control, FX level encoder, and illuminated engagement button.

Immersive All-In-One Audio Experience

The powerful, built-in speakers offer the perfect sound solution for livestreaming, practicing, content creation, and personal monitoring during live shows. The dedicated volume knob and on/off switch offers full control to meet the needs of any gig, making it easy for DJs to bring the booth with them wherever their career takes them.

Dynamic Lighting Integration

For enhanced performance visuals, the onboard Engine DJ operating system is fully integrated with Engine Lighting. A quick button press allows DJs instant access to automatically beat-synced light shows for songs stored on saved media as well as for streaming tracks. Full parameter controls over color, intensity, strobe, and more can be adjusted on the fly for jaw-dropping light shows using Phillips Hue, Nanoleaf, and DMX lighting.

The fully loaded, fully capable SC LIVE 2 represents the next generation of standalone DJ controllers and is sure to inspire a new era of musical freedom and creativity.


Technical Specs

Audio
Frequency Range: 20-20,000 Hz
Sampling Rate: 44.1 kHz
D/A Converter: 24 bit

Physical Unit
Dimensions (W x D x H): 26.7 x 15.4 x 3.9 Inches
Weight: 10.14 lb

Compatibility

Software
Engine DJ OS
SoundSwitch
Virtual DJ
Serato DJ

Hardware
SoundSwitch Micro USB to DMX Interface
SoundSwitch Control One Professional Lighting Controller

Onboard Internet Services
Amazon Music Unlimited
Beatport
Beatsource
Dropbox
SoundCloud GO+
TIDAL

Included Contents
Quick Start Guide
DC Power Supply
USB Cable
Display Cleaning Cloth
Safety & Warranty Manual

FAQ's

Do other Engine DJ products work with Amazon Music Unlimited?

No. A hardware change was needed in order to support this technology.

Does the SC LIVE 2/4 work with an Amazon Music Free or Amazon Music Prime account?

No. The SC LIVE 2/4 only supports Amazon Music Unlimited.

Amazon Music Unlimited offers 75 million tracks in lossless High Definition (HD) and millions more in Ultra High Definition (Ultra HD). HD tracks are 16-bit audio, with a minimum sample rate of 44.1 kHz (16/44.1 is also referred to as CD-quality), and an average bitrate of 850 kbps. Ultra HD tracks have a bit depth of 24 bits, with sample rates ranging from 44.1 kHz up to 192 kHz, and an average bitrate of 3730 kbps.

How many Amazon Unlimited tracks can I stream simultaneously?

Amazon Unlimited allows for up to two tracks to be streamed simultaneously. That includes tracks loaded to decks or previewed from the library.

Notes: ***B-STOCK: Box damaged, product unused & in perfect condition***


Akai's mid-range MPC features full-size pads plus a built-in rechargeable battery and speakers. Integrated phono stage makes it easy to sample from vinyl. A hugely capable studio centrepiece.

Supplier's Notes:
Meet MPC Live II, the full MPC experience in its most portable configuration yet. Everything you need to make music, anywhere, right at your fingertips.

There's no need to compromise for portability. MPC Live II is the complete MPC experience without missing a step. A rechargeable lithium-ion battery means you can work anywhere for hours. Full-size MPC pads give you the ultimate in drum performance and the expanded function buttons allow for quick editing on-the-fly so you never miss a beat.

For the first time ever, you now have studio-grade monitors built-in directly to your MPC. No need to waste precious time looking for your headphones, untangling cables or powering up external monitors. These full range stereo monitors deliver low end thump along with tight top end to make portable beat-making the sonic experience you need to feel your music.

MPC Live II integrates into your creative space with all the ports, jacks and connectivity you need. USB 3.0, 2x2 MIDI, CV/Gate, 3 stereo outs and more. WiFi and Bluetooth connectivity make for a completely wireless workflow. No matter the device, MPC Live II is ready to get connected!

MPC Live II will super charge your production. With MIDI performance to tap in to as many devices as you need, an intuitive and streamlined layout not to mention the MPC workflow features you need; 16 Levels, Note Repeat, Auto Sample, Chords & Notes More and so much more. Get ready to level up to the MPC Live II.

KEY SPECS:

Pads:
(16) velocity and pressure-sensitive pads, RGB-backlit
(8) banks accessible via Pad Bank buttons

Knobs:
(4) 360- touch-sensitive Q-Link Knobs
(4) Q-Link Knob columns accessible via Q-Link button
(1) 360- encoder for display navigation and selection via push

Buttons:
(27) dedicated function buttons; red, amber, or green backlit

Display:
6.9" / 176 mm (diagonal)
5.9" x 3.7" / 150 x 93 mm (width x height)
Full-color LED-backlit display with touch interface

CPU: Quad-core ARMr processor
RAM: 2 GB
Storage: 16 GB, expandable via SATA connections

Connections
(2) 1/4" (6.35 mm) TRS inputs (1 stereo pair)
(6) 1/4" (6.35 mm) TRS outputs (3 stereo pairs)
(1) 1/4" (6.35 mm) stereo headphone output
(2) RCA inputs (1 stereo pair)
(2) 5-pin MIDI inputs
(2) 5-pin MIDI outputs
(4) TRS CV/Gate jacks, 8 outputs total
(1) Ethernet link port
(2) USB Type-A ports
(1) USB Type-B port
(1) SD Card slot
(1) Power Adapter input

Power:
Via power adapter: 19 V, 3.42 A, center-positive, included
Via battery: Up to 5 hours of battery life

Dimensions (width x depth x height):
16.2" x 9.6" x 1.8"
411.5 x 243.8 x 45.7 mm

Weight:7.45 lbs/3.38 kg

Notes: Looping and sampling combine in a fun new way with this beautifully designed digital 'tape music instrument' from Chompi Club. Record, perform, loop and overdub with built-in effects. Cute but powerful.

Supplier's Notes:
CHOMPI is a quirky, chromatic sampler and tape music instrument, inviting you into the magical world of sound design. With its unique stereo sampling engine, expressive multi-effects and varispeed "tape" style looper; CHOMPI is ready for immediate fun.

Special care was taken with sourcing quality materials for CHOMPI's hardware, but many aspects of the platform have also been designed with user customization in mind. The modular panel enclosure, MX mechanical key switches & keycaps, and DJ style encoder knobs can all be customized and retrofitted by the user to match their own unique style.

CHOMPI's workflow is designed to be user-friendly and accessible to individuals of all experience levels... So whether you've been playing music for years, or are just starting your sonic journey, CHOMPI just might become your new favourite buddy!

Features

Unique screenless workflow utilizes rgb LED indicators
Endless push button encoders for multi-page parameter controls
Two octave chromatic keyboard utilizes MX Cherry switches
3 selectable sampling sources
Built-in microphone
Stereo Aux input
Resample master output signal
Minimal, yet capable sound design engine:
Sample playback speed & direction control
Sample start & end point control
Sample attack & release/decay envelope
Single knob multi-FX section
Pg 1 Magic Wand: combo delay + reverb
Pg 2 Tape Saturation: w/ wow & flutter
Pg 3 Multi-Mode Filter:
Varispeed tape-style looper
Transport knob provides control over loop playback speed & direction, as well as manual tape scrubbing when loop is paused
Overdub decay controls allow for "frippertronics" loop composition techniques
Real time audio thru mode for live FX and loop recording
Two types of sample playback engines: chromatic & 1-shot
7 Voice Polyphony
84 Slots to Save/Recall Presets (3 banks of 14 slots per engine)
~6hrs of sample storage capacity on Micro SD card
16-bit, 48kHz stereo audio I/O
USB-C and rechargeable battery power
Built-In Microphone
3.5mm Stereo Aux Input
3.5mm Stereo Line Output
3.5mm Headphone Output
3.5mm and/or USB-C Midi In & Out

Specs

Dimensions: 13" Wide x 4.5" Deep (without Handle) 5.75" Deep (with Handle) x 2.5" Tall (table/surface to top of encoders)
Weight = 2lb 3oz
Recommended USB power brick spec: 5V / 2A (or higher)
Manufactured in California, USA

Included In The Box

1x CHOMPI Sampler (Classic Black & Gold Colorway)
1x USB-C Cable
1x Quickstart Guide
1x CHOMPI Sticker

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


The Tiptop Audio Buchla Model 296t is a 16 band spectral resonator & vocoder based on the original Buchla 296.

The 296 was first introduced in 1978 and very few were ever made. Making a module of such complexity at a time when electronic schematics were drawn with pencils, with 48 filters that were most likely hand-calculated is just incredible.

The 70's were a great era of exploration and proof of audio electronics scientific theories, but for Don Buchla it seems like it was always something beyond theory.

The 296 might at first look like an equalizer, but Don Buchla had totally different ideas for it. He managed to pack into it a 16-band analogue modular spectral processor, a cross-band vocoder, plus a massive amount of patch points to work with his synthesizer system.

Notes: Second-gen version of the excellent Opsix features major updates including 64-voice polyphony and an improved interface. Same powerful six-operator FM synth engine.

Supplier's Notes:
A Full-Spectrum Sound Experience

Opsix mk II is a digital synth like no other. Based on the sound engine of the original Opsix, the number of simultaneous voices and voicings has been expanded to an astounding 64 voices. The result is superior performance and precise control.

The Opsix Operator Mixer simplified FM synthesis for the first time, making it not just comprehensible but also controllable. With the addition of extra synthesis capabilities and programming, it offered a more efficient workflow and an even richer sound.

And, it is fully compatible with the sounds and samples from both the original opsix and the opsix Native software, including numerous high-quality libraries.

Evolved to an astounding 64 voices

The Opsix mk II has 64 voices, twice as many as the original 32 voices, allowing users to enjoy tone editing without having to worry about the number of simultaneous voices. In addition, the operator-mixer section, the most distinctive feature of this product, has been accented with a new image colour, green.

Get Illuminated with the Operator Mixer

At the heart of every sound is Opsix mk II's Operator Mixer - a simple set of six faders and knobs that invite exploration. Each part lights up red to indicate carriers or blue for modulators. Manipulating them opens up new sound-shaping possibilities to breathe fresh life into your musical ideas. This straightforward, hands-on workflow is part of what makes Opsix mk II so unique, just like the sounds it offers.

Direct Hands-On Control

Whether you're tweaking a preset or building a patch from the ground up, the six data entry knobs on the right give you quick access to the parameters you need and seamlessly sync with the large OLED display, giving you a clear, focused direction to your workflow. Coupled with the mixer, it makes creating fresh sounds super easy and, most importantly, fun!

Select from a full range of analogue-style filters, from the radical Korg MS-20 low-pass/high-pass filter to the powerful yet smooth KORG Polysix low-pass filter that gives your sound a vintage feel. There are also two or four-pole low-pass, high-pass, band-pass, and band-reject filters with resonance.

There's even a built-in spectrum analyser and oscilloscope that gives you visual feedback via the screen on the music you're making.

Six in One Synthesis

The core of Opsix mk II is nothing short of exponential. Since waveforms can be arranged and modulated in nearly infinite ways, Opsix mk II can easily do the sonic work that is similar to numerous types of synthesis:

Subtractive

Removing parts of the sound to get the sound you want; the most widely-used synthesis. Opsix mk II uses up to six envelopes and multi-modelled filters to achieve many cutting-edge and classical analogue synthesis tones.

Semi-Modular

Rerouting signal paths to change the sound. A spin through the Algorithm section will dramatically reshape the sound by changing how the signal routing between the operators work together, and no patch cables are needed. Analog-style controls and plenty of stackable waveforms take you from digital to analogue-sounding in no time. Enjoy deep basses, crisp leads, thick pad sounds, fuzzy brass tones, and so much more.

Analogue (Modeling)

Analogue-style controls and plenty of stackable waveforms take you from digital to analogue-sounding in no time. Enjoy deep basses, crisp leads, thick pad sounds, fuzzy brass tones, and so much more.

Waveshaping

Adding intentional distortion to the waveforms to achieve aggressive overtones that are either harmonic or inharmonic. This will help you achieve gritty, bitey tones dripping with character.

Additive

Stacking waveforms and blending their harmonics is key to an expansive range of harmonious, dissonant, and tension-driven sounds. With six operators available, the complete FM experience is possible, including the ability to go back in time for classic sounds you have heard throughout recording history.

Classic FM

Last but certainly not least, Opsix's highly flexible and powerful architecture starts with true six-Operator FM. As a result, it easily delivers signature sounds you have surely heard on thousands of hits from the '80s on through today, and with far more polyphony than other standalone FM synths available today.

With all of these ways to realize and explore sounds, Opsix mk II is uniquely suited as a "future-modern-classic" synth!

Altered Reality

What started as a legacy synthesis has evolved into something completely different. Opsix mk II is FM-based, but the similarities to the classic synthesis end there. The Altered FM architecture delivers sounds across a vast spectrum, far wider than any single synthesis has been able to cover before, thanks to new sound components; new waveforms, filters, shaping, effects, LFOs, envelopes, modulations, and more, all translating to its broad assortment of sounds.

Powerful Effects Processing

Opsix mk II provides three blocks of 30 types of high-definition effects that you can use together to enhance your sounds even further. There's everything from a great mix of usable standard effects like chorus, phaser, delay, and compressor to some world-class shimmering reverbs that will elevate your sound to the next level.

Specifications

Keyboard: 37 keys (velocity and release-velocity sensitive)
Sound generating system: Altered FM sound generator
Maximum Polyphony: 64 voices (varies depending on the setting)
Structure: 6 operators, 1 filter, 3 EGs, 3 LFOs, 3 effects, step sequencer, arpeggiator
Algorithm: 40 presets + user algorithm (unique to each program)
Operator: 6 modes (FM, Ring Mod., Filter, Filter FM, Wave Folder, Effect)
Oscillator waveform: 23 waveforms (Sine, Sine 12bit, Sine 8bit, Triangle, Saw, Saw HD, Square, Square HD, Additive Saw3, Additive Sqr3, Additive Tri3, Additive 12345, Additive 1+2, Additive 1+3, Additive 1+4, Additive 1+5, Additive 1+6, Additive 1+7, Additive 1+8, Noise S/H, Noise White, Noise Pink, Noise Blue)
Filter: 11 types (LPF 12, LPF 24, LPF MS-20, LPF POLY6, HPF 12, HPF 24, HPF MS-20, BPF 6, BPF 12, BRF 6, BRF 12)
EG: ADSR
LFO: 23 waveforms (Triangle, Saw Down, Saw Up, Square, Sine, Sample&Hold, Guitar, Exp. Triangle, Exp. Saw Down, Exp. Saw Up, Step4 Triangle, Step6 Triangle, Step4 Saw Down, Step6 Saw Down, StepRnd:Time, StepRnd:Lvl&Time, StepRnd:Level, Random:Time, Random:Lvl&Time, Triangle + , Saw Down + , Saw Up + , Square +)
V.Patch: 12 routings
Effect: 30 types (Chorus, Unison Ensemble, Phaser, Phaser (BPM) , Auto Pan, Auto Pan (BPM), Flanger, Flanger (BPM) , Rotary Speaker, Auto Wah, Exciter, Enhancer, LFO Filter, 3-Band EQ, Distortion, Guitar Amp, Decimator, Grain Shifter, Master Limiter, Compressor, Delay, Delay (BPM) , Autopan Dly, Autopan Dly (BPM), Tape Echo, Tape Echo (BPM) , Early Reflection, Reverb, Shimmer Reverb, Spring Reverb)
Sequencer: Step Sequencer (up to 16 steps, up to 6 notes per step), Motion Sequencer (up to 6 lanes)
Arpeggiator: 7 patterns (MANUAL, UP, DOWN, ALT1, ALT2, RANDOM, TRIGGER)
Number of programs: 500 (350 preset programs and 150 user programs as the factory-set default)
Favourite: 64 (16 Slots × 4 Banks)
Controllers: MODULATION wheel, PITCH wheel, RATIO OP 1-6 knobs, LEVEL OP 1-6 sliders, DATA ENTRY A-F knobs
Inputs/outputs: Headphone (6.3 mm stereo phone jack), OUTPUT L/MONO and R (impedance-balanced 6.3 mm TRS phone jacks), DAMPER (6.3 mm phone jack, half-damper not supported), MIDI IN and OUT connectors, USB B port
Power supply: AC adapter (DC12V)
Power consumption: 5 W
Dimensions (W × D × H): 565 × 338 × 90 mm / 22.24" × 13.31" × 3.54"
Weight: 2.9 kg / 6.93 lbs.
Included items: AC adapter
Accessories (sold separately): DS-1H damper pedal, PS-1 pedal switch, PS-3 pedal switch

Notes: Debut release from Pioneer parent company AlphaTheta, the Wave-Eight offers ultra-low-latency hi-fi sound over wireless SonicLink connection. Up to eight hours operation with built-in battery, waterproof design, and impressive portability thanks to 12.7 kg total weight per unit.

Supplier's Notes:
SonicLink ultra-low-latency wireless technology

Cable-free DJing is possible with the WAVE-EIGHT, thanks to SonicLink. This ultra-low-latency technology wirelessly transmits audio much faster than a Bluetooth connection so only a fraction of a second passes between pressing play on the decks and hearing the track through the speaker.

Switchable sound modes

The WAVE-EIGHT features several modes you can change between with a single switch to create the type of sound you need, including Mono, Stereo, and Subwoofer mode.

Combinable with the OMNIS-DUO

If you combine the WAVE-EIGHT with the OMNIS-DUO portable all-in-one DJ system, which also features battery power, you can play cable-free for total freedom.

Battery power and waterproof design

A full battery charge gives you 8 hours of music on the WAVE-EIGHT. The unit is also waterproof, with an IPX4 rating, so it's ideal for using outdoors.
And there's a USB Type-C port for
charging a phone or other device.

Professional sound quality
With a highly efficient Class D amplifier, a newly developed 8-inch driver, and a Vortex Bass Accelerator which delivers clear and powerful bass, the WAVE-EIGHT will bring the vibes and the punch to your party's sound, even in outdoor settings. To cover larger events and spaces, you can easily add more units to your setup with the SonicLink connection.

Easy portability

The extendable handle, casters, and additional grab handles make it easy to carry the WAVE-EIGHT to any location on your own. There's a pole socket built-in too, so you can mount the speaker on a stand for extra height.

SonicLink ultra-low-latency wireless technology
Combinable with the OMNIS-DUO
Professional sound quality
Switchable sound modes
Battery power
Waterproof design
Easy portability

Dimensions: (W × H × D) 300 × 554 × 337 mm / 11.8" × 21.8" × 13.3?"
Weight: 12.7 kg / 28.0 lbs.
Frequency range: 2.4 GHz (2.4000 GHz - 2.4835 GHz)
EQ modes: Music / Music (Low Cut) / Flat / Flat (Low Cut) / Vocal / Subwoofer (Low Cut mode is intended for use on units that are combined with a WAVE-EIGHT set to Subwoofer mode.)
Battery life / Battery spec: Approximately 8 hours
Internal battery charging time: Approx. 4 hours with power off / Approx. 6 hours with power on
Terminal
Input: XLR/TRS combo jack × 2, 1/4" TRS jack × 1, 3.5 mm stereo mini jack × 1
Output: XLR × 1

Notes: ***B-STOCK: Box opened, product in perfect working order***


Akai's mid-range MPC features full-size pads plus a built-in rechargeable battery and speakers. Integrated phono stage makes it easy to sample from vinyl. A hugely capable studio centrepiece.

Supplier's Notes:
Meet MPC Live II, the full MPC experience in its most portable configuration yet. Everything you need to make music, anywhere, right at your fingertips.

There's no need to compromise for portability. MPC Live II is the complete MPC experience without missing a step. A rechargeable lithium-ion battery means you can work anywhere for hours. Full-size MPC pads give you the ultimate in drum performance and the expanded function buttons allow for quick editing on-the-fly so you never miss a beat.

For the first time ever, you now have studio-grade monitors built-in directly to your MPC. No need to waste precious time looking for your headphones, untangling cables or powering up external monitors. These full range stereo monitors deliver low end thump along with tight top end to make portable beat-making the sonic experience you need to feel your music.

MPC Live II integrates into your creative space with all the ports, jacks and connectivity you need. USB 3.0, 2x2 MIDI, CV/Gate, 3 stereo outs and more. WiFi and Bluetooth connectivity make for a completely wireless workflow. No matter the device, MPC Live II is ready to get connected!

MPC Live II will super charge your production. With MIDI performance to tap in to as many devices as you need, an intuitive and streamlined layout not to mention the MPC workflow features you need; 16 Levels, Note Repeat, Auto Sample, Chords & Notes More and so much more. Get ready to level up to the MPC Live II.

KEY SPECS:

Pads:
(16) velocity and pressure-sensitive pads, RGB-backlit
(8) banks accessible via Pad Bank buttons

Knobs:
(4) 360- touch-sensitive Q-Link Knobs
(4) Q-Link Knob columns accessible via Q-Link button
(1) 360- encoder for display navigation and selection via push

Buttons:
(27) dedicated function buttons; red, amber, or green backlit

Display:
6.9" / 176 mm (diagonal)
5.9" x 3.7" / 150 x 93 mm (width x height)
Full-color LED-backlit display with touch interface

CPU: Quad-core ARMr processor
RAM: 2 GB
Storage: 16 GB, expandable via SATA connections

Connections
(2) 1/4" (6.35 mm) TRS inputs (1 stereo pair)
(6) 1/4" (6.35 mm) TRS outputs (3 stereo pairs)
(1) 1/4" (6.35 mm) stereo headphone output
(2) RCA inputs (1 stereo pair)
(2) 5-pin MIDI inputs
(2) 5-pin MIDI outputs
(4) TRS CV/Gate jacks, 8 outputs total
(1) Ethernet link port
(2) USB Type-A ports
(1) USB Type-B port
(1) SD Card slot
(1) Power Adapter input

Power:
Via power adapter: 19 V, 3.42 A, center-positive, included
Via battery: Up to 5 hours of battery life

Dimensions (width x depth x height):
16.2" x 9.6" x 1.8"
411.5 x 243.8 x 45.7 mm

Weight:7.45 lbs/3.38 kg

Notes: ***B-STOCK: Box opened, product in perfect working order***


Brilliantly unusual synth based on eight analogue tone generators, functioning more like an electric organ or FM synth than a conventional subtractive architecture. Unique sound.

Supplier notes:
Welcome to the world of sound of LYRA-8, the unique organismic analogue synthesizer designed by Vlad Kreimer. "Organismic" means that LYRA uses some principles that lie in the base of living organisms. The way how LYRA's modules interacting between each other and the behaviour of the instrument resembles a live conversation.

LYRA-8 is based on eight generators, which will be referred to as voices. Their design is not like a traditional subtractive synthesis VCO. Instead of having a linear or logarithmic dependency on control voltage, they resemble the tone generators in old electric organs. Hence the use of the term "voices" instead of VCOs. Lyra uses non-linearity a lot, and the voices are constructed in such a way that allows for non-linearity to express itself.

The voices are divided into four pairs (12, 34, 56, 78). All the pairs are divided in two groups, with two pairs in each (1234, 5678), creating tree-like structure.

The voices can function either in an electric organ mode or in an FM synthesis mode with each of the voices and its envelope acting as a separate FM operator. The voice's impact on FM synthesis will decrease along with the decay of its envelope.

LYRA-8 also has the next blocks:

The HYPER LFO is a complex low-frequency generator, whose waveform is synthesized from two simple LFOs by summation or multiplication of their frequencies. It also has a sync mode. The LFO can modulate the selected pairs of voices and the MOD DELAY.

The MOD DELAY consists of two lines of delay with cross-feedback and a special architecture that enables resonance between the two lines. Each line's delay time can be individually modulated from various sources, including external ones. The delay has a unique possibility of self-modulation where the output signal modulates the delay sample rate, creating cool effects.

The DISTORTION is last in the chain, after the delay. It enables the delay to also influence the distortion.

For all its experimental character, LYRA is a professional instrument. Its output dynamics and frequency response are balanced and ready for a live performance or studio recording without any additional processing.

Notes: ***B-STOCK: Box opened, product in perfect working order***


Desktop version of the mega Hydrasynth. The same amazing synth engine, paired with polyphonic, pressure-sensitive touchpads, making it an interesting creative alternative to the keyboard version.

*** New 2.0 Firmware update for all Hydrasynth models - March 2023 ***

This is a free of charge update for all current and new users of Hydrasynth. The biggest news in this update includes:
Expanded memory to 8 banks (Keyboard, Desktop, and Explorer only)
NEW modulation source: VOICE MODULATOR
OSC Bit reducer
LFO quantizer
ENV quantizer
LFO Step Advance
Global FX bypass
Increased Vibrato resolution
New Sustain pedal options including Sostenuto
More LED options
Glissando in glide options
Arp Range goes to 6 octaves
Arp Step Offset parameter
More Rand/Init shortcuts (all STEP LFO steps, Wavescan waves, Voice mod offsets)
Local On/Off saved
......And more!
This is the first major update to the Hydrasynth family in a little, which adds a tonne of new features.


Supplier's notes:
The HYDRASYNTH Desktop / Rack has the same great sound engine as the HYDRASYNTH Keyboard. The sound engine is a sound designers dream synth as well as a performing musicians ideal. The sound engine is designed for maximum flexibility. At the same time, we designed the user interface in a way to allow you to edit the patch quickly with a minimal amount of paging and many workflow shortcuts.

Utilizing an advanced wavetable synthesis engine, 3 Oscillators, dual Wave Mutators and 2 filters that can be configured in series or parallel, the tone generating capabilities are unmatched.

As for the performance capabilities, The Hydrasynth Desktop / Rack has 24 polyphonic pressure touch pads so that you can play the unit without needing to connect a keyboard or other controller. Using multiple pad layout modes as well as quick to access scale modes, the Hydrasynth Desktop / Rack is easy to make music on.

The Hydrasynth Desktop / Rack comes with rack ears so that you can mount it in a standard 19" rack.

Notes: ***B-STOCK: Box damaged, product unused & in perfect condition***


Updated version of Korg's excellent Wavestate, drawing on the iconic Wavestation synth to create a modern take on wavetable synthesis, now with added polyphony.

Supplier's Notes:
Wavestate mkII

Extended polyphony. Extended possibilities.

Korg's legendary Wavestation introduced the world to wave sequencing, and the 37-key Wavestate mkII builds on that legacy with a reimagined, compact synth designed to satisfy today's demanding musicians and producers. MkII expands polyphony to 96 stereo voices and adds a fresh look. It's completely compatible with sounds and samples for the original Wavestate.

Overview

Korg's legendary Wavestation introduced the world to Wave Sequencing, transforming raw samples into sounds that no-one had ever heard before. The flagship OASYS, Kronos and Nautilus keyboards developed Wave Sequencing even further, expanding on its unique palette of lush, evolving pads and driving rhythms.

Now, Korg is proud to present the new Wavestate mkII, with improved polyphony (96 stereo voices) and a fresh look. It's completely compatible with sounds and samples for both the original Wavestate, Wavestate SE and Wavestate Native software, including many excellent third-party libraries. Updated sounds and software keep it fresh and the compact form-factor, with 37 full-size keys, still transports easily and fits neatly into any stage, studio, or desktop setup.

Keyboard: 37-keys, velocity sensative
Sound generation: Wave Sequencing 2.0
Polyphony: 96 stereo voices
Configuration: Performance: 4 layers, reverb, EQ
Layers: Program, Arpeggiator, Key, and Velocity Zones
Programs: Wave Sequence, Filter, Amp, Pre FX, Mod FX, Delay
Presets: 261 Performances,799 Programs, and 1042 Wave Sequences
Controllers: MOD wheel, PITCH wheel, Vector Joystick, 8 x program/Performance Mod knobs.
Effects: Pre FX x4, Mod FX x4, Delay x4, Reverb, Performance EQ

Inputs/outputs:

Audio Outputs L/MONO, R (6.3mm TRS phone jack, impedance balanced)
Headphones (6.3mm stereo phone jack)
Damper (6.3mm phone jack)
MIDI in,out
USB Type B

Power: AC adapter (DC12V, 2500mA)
Power consumption 5w
Dimensions: 565 W x 338 (D x 92 (H mm
Weight: 2.9kg

Notes: Rossum Electro-Music Software Architect Bob Bliss (who also, as it happens, fathered E-mu's famed "EOS" Emulator Operating System) has created Panharmonium, a unique music and sound design tool that lets you analyse the spectral content of any audio signal and use that analysis to drive a bank of from 1 to 33 oscillators. Depending on various control settings, Panharmonium can accurately reproduce the input spectrum in real time or modify it in a multitude of wildly creative ways. All with an interface whose immediacy encourages performance and interaction.

Panharmonium input can be anything from a single oscillator to an entire mix (including vocals). From dense, swirling pads and drones that evolve with the input's changing spectrum, to clock-syncable spectral arpeggiation, to as-yet unnamed harmonic effects, Panharmonium opens up an entirely new world of sonic possibilities.

Additionally, Panharmonium can take a snapshot of an instantaneous spectrum and use that as a complex harmonic oscillator, which can then be modified and modulated by all of Panharmonium's other controls.

Panharmonium accomplishes its magic though a combination of functional submodules:

Spectral Analyzer

The Spectral Analyzer provides tools for defining the analysis process.

- The Slice parameter sets the rate at which the incoming audio is transformed to spectral data. It can be set by the Slice and Multiplier controls, the Tap button, or by an external clock signal. Very short slice times result in real-time spectral data, while longer times can create rhythmic spectral patterns.

- The Center Freq and Bandwidth controls (and associated CV inputs and attenuverters) control the range of frequencies to be analysed. The Bandwidth control allows the selection of narrow to wide pass bands on the left side of the pot and narrow to wide notches on the right side of the pot. The ability to sweep the frequency and modify the bandwidth under CV control opens up a wide range of sonic effects.

- The Freeze button lets you freeze the spectral integrator, sustaining the currently analysed spectrum.

Spectral Modifiers

These controls allow you to creatively modify the analysed spectra.

- The Voice parameter lets you select from 1 to 33 oscillators to resynthesize the spectrum.

- The Blur parameter (and associated CV input) is a spectral lag processor that controls how quickly the spectrum can change.

- The Feedback control lets you route the resynthesized audio back into the entire processing chain for subtle or dramatic feedback effects. At its max, the output becomes self-sustaining, even if the input is removed.

Oscillator Bank

The Oscillator Bank resynthesizes the analysed spectra.

- The Waveform parameter selects the oscillators' waveform. In addition to the usual sine, triangle, sawtooth and pulse waveforms, two special crossfading sine and sawtooth waveforms are included.

- The Freq control lets you tune the oscillators over a +/-7 semitone range. The frequency is further controlled by the 1V/Oct input and the FM input and attenuverter.

- The Octave control, not surprisingly, shifts the pitch of the output by octaves.

- The Glide parameter sets the amount of polyphonic glide (i.e., each oscillator has its own glide circuit).

- The Mix control (and associated CV input) sets the balance between the original input audio and the resynthesized audio.

Optional Functions

A number of optional functions can be selected by using the Output Mode and Tap buttons.

- Holding the Output Mode button and adjusting the Slice control enables Drums Mode, which optimizes the spectral analysis for drums and other percussive inputs.

- Holding the Output Mode button and adjusting the Freq control enables Spectral Warping. In contrast to conventional frequency adjustment, where the harmonic relationships between the spectral elements are preserved, Spectral Warping shifts the harmonic elements individually, producing a variety of clangorous, swarming textures.

- Holding the Tap button and adjusting the Freq control quantizes the resulting frequency adjustments to semitones.

Spectra Memories and Presets

Panharmonium provides 12 user Spectra memories and 12 user Presets.

- The Spectra memories let you store up to 12 frozen slices. When selected, a spectrum (up to 33 oscillators wide!) replaces any live input and can have its pitch controlled by the 1V/Oct input and FM controls.

- A Preset is a snapshot of all of the module settings, along with the value of any CVs present at the moment the preset is saved.

Panharmonium is 26HP wide and 25mm deep.

Power requirements (max): 140mA +12V, 30mA -12V. Reverse polarity protected.