搜索结果

Notes: Great value from this compact filter module. The Pip Filter is a 12dB/oct resonant design with built-in normalled VCA and a trigger input for pinging. Lots of functionality and creative potential packed into 4 HP.

Supplier's Notes:
Compact Low Pass Filter and VCA

The 'Pip Filter' is a compact 4HP voltage controlled 2 pole low-pass filter with resonance, a 'pingable' trigger input and built in VCA.

Filter cutoff is controlled via both knob control and dual CV inputs with a built in attenuverter.

Resonance is manually controlled and will reach into self oscillation with rough V/Oct tracking.

A trigger input allows the filter to be pinged for percussive plucked type sounds. Finally, a built in VCA (normalled open) allows for additional independent amplitude control of the filtered signal.


Technical Specifications

Size: 4HP
Power: +12V 25mA / -12V 25mA
Depth: 32mm (approx)

Notes: Compact Analogue LFO & VCO

The 'Pip LFO' is a compact 4HP all analogue low frequency oscillator with a wide frequency range, voltage control, numerous outputs, reset input and a VCO mode.

LFO speed is set via a manual control and voltage control input. There is a unipolar square wave output along with both bipolar and uni-polar triangle, saw and sine waveform outputs.

When VCO mode is activated, the frequency jumps to audio range and will track V/Oct for approx 5 octaves. A reset input allows the LFO waveform cycle to be reset and produces hard sync functionality in VCO mode.


Technical Specifications

Size: 4HP
Power: +12V 40mA / -12V 20mA
Depth: 32mm (approx)

Notes: Four voice paraphonic

Ripsaw contains 4 voices that can each be individually controlled with 1 volt per octave pitch CV.

Seven oscillator spread

Each of Ripsaw's 4 voices contain 7 waveforms that can be detuned from eachother in pitch to create a lush swarm oscillator sound.

Wave morph

Ripsaw's oscillator waveforms morph smoothly from classic sawtooth to square for a hollow, haunting tone when spread detune is introduced.

Super sync

Ripsaw's shift parameter offsets the pitch of a hard sync oscillator for every one of the 28 waveforms to open up a whole new timbral dimension

Hex platform

Ripsaw is only the first firmware to be released on our new 6hp eurorack hardware platform called HEX. Other firmware options that generate and process sound will be available to download and try out free of charge.

Specifications:

6hp
25mm deep
42mA on +12V, 5mA on -12V, 0mA on +5V

Notes: ***B-STOCK: Box opened, product in perfect working order***


Unlock Limitless Creativity.

Experience the power and versatility of the ultimate MIDI Controller & Looper. Take control of your music like never before.

Redefined sensitivity.

ERAE II reacts from the lightest touch to the fastest strokes, pushing the dynamics to the extreme possible range of musical articulation. Embedding 16.000 force sensors, ERAE II benefits from our patented Force Multi-Touch technology, which offers ultra-responsiveness, down to a very low threshold force.

The most playable surface yet.

ERAE II benefits from 3 years of R&D with our patented Force Multi-Touch technology sensing just a few grams of pressure on a very large playable surface.

A sub-millimetre XY precision both in relative and absolute mode with enhanced sensor linearity for ultra-stable and continuous finger slides.

Complete musical articulation.

Add polyphonic portamentos, slides and after-touch to your musical creative process.

Control multiple sound parameters with a single touch and explore new possibilities on your favourite synthesizers.

Expressive looping.

Record segments of music and play them back with ERAE II's 8-track looper. You can define duration, quantization and BPM, overwrite and overdub expressive features.

Every gesture recorded on the fly is replayed visually, creating a show for the eyes.

Here it is in action: quickly recording a base line then adding a drum sequence. Stop the recording and jam on top of your loops.

Modular mastermind

Multi-dimensional connectivity.

ERAE II features 24 (12 dual) configurable analogue outputs, to be used as CV/Gate, drum triggers, and bipolar modulation CV controls. Bring life to your modular patches, and record intricate loops to be played back on any CV!

Different skins.

ERAE II features a unique skin that connects the sensors to your fingers. This material is designed to provide the perfect gliding sensation, with just the right amount of softness and the organic feel of fabric.

This skin can be replaced in just a few minutes. Our Kickstarter backers will receive a second skin made of black silicone.

Expressive Controller Looper

Erae Touch is a polyphonic MIDI Controller & Looper.

Designed for immersive live performances it will enrich your musical composition and become the master device to control all your hardware synthesizer, modular gear and software instruments.

Built with unrivalled sensitivity and offering infinite configurability.

User-friendly configuration

No more back & forth menu diving.

Setup the tempo, set your scales and launch loops from the settings section with ease thanks to the backlit buttons, the LCD screen and the selection click wheel embedded in the top right hand corner.

The ERAE Lab

Create your own layouts with the free companion software ERAE Lab. It's a simple yet powerful creation software: elements, MIDI settings and styles can be defined and tested in just a few clicks.

ERAE Lab now enables seamless layouts and project management. Drag existing layouts from a project to the compose panel. Browse your project library and pick layouts to create new ones in a few clicks.

Customize your interface with musical elements such as isomorphic keygrids, keyboards, or control elements with fader and buttons.

An open canvas.

This is an open canvas for the most daring. The API is a custom sysex library with messages enabling you to take full control of the ERAE II detection points and LEDs states. (You can already download the full API Documentation here).

A new kind of arpeggiator.

Explore the arpeggio's parameters in 3D. All the arpeggiator parameters (rate, octave range, note length, pattern, steps, velocity) can be mapped to expressive gestures (after touch, slide, portamentos).

Use the aftertouch control to modulate the rate while sliding the same finger to bend the note. Push it even more with MPE!

What's in the box:

Erae Il MIDI Controller & Looper
A Set of 2 skin with fabric and silicon material
60W USB power supply
2x USB cables (Power and MIDI data)
1x MIDI-TRS cable

Notes: ***B-STOCK: Box opened, light surface marks, product in perfect working condition ***


Developed in conjunction with Dutch software dons 112dB, the Echolocator brings precise, ultra-controllable delay to the hardware realm. Full stereo design with filter and shimmer modes, freeze function and foot switch input.

Supplier's Notes:
The Echolocator is a hands-on precision tool that lets you take manual and very musical control over small nuances. Like a bat navigating its environment in the dark, you can feel your way through your live performances and shape the delay response and character on the fly. Featuring 12 parameters for detailed sound design, save/recall functions for all parameters, MIDI control over all parameters and a sleek aluminium case to match our lineup of compact desktop units, the Echolocator will let your setup take flight in any live show, studio or sonic experiment.

Notes: The TMA-2 Studio Wireless headphones provide a seamless wireless functionality for music creators seeking freedom of movement, cable free recording, and a light, comfortable build with exceptional performance for versatile use. Free yourself from cables with ultra-low latency wireless audio.

Connect wirelessly to all of your gear: Cable-like performance with under 10ms of latency via W+ Link technology, featuring 20+ hours of playback time.

Hear all the details: Detailed and balanced sound representation with strong frequency separation reveals the subtle details in your music.

Control your sound profile: Use the AIAIAI app EQ to shape the sound to your preference, whether that be flat and accurate for mixing or dialing up the bass for creative sessions.

Stay in the zone for hours: Over-ear cushions and padded headband using high grade memory foam covered in soft PU leather, for enhanced comfort during creative sessions or live performances.

Go beyond the studio: Use W+ Link for live performance or switch to Bluetooth mode for everyday listening and making calls, or plug directly in with the detachable cable.

Customise, replace and upgrade: The modular nature of TMA-2 Studio Wireless allows for endless customisation and easy upgrades or replacements of individual parts.

Notes: ***B-STOCK: Box opened, product in perfect working order***


*** Update February 2025- NKS Integration available with this product ***

Native Kontrol Standard (NKS) is a technical standard that connects plugins to hardware controllers with no setup required. The NKS ecosystem includes over 2,000 virtual instruments and plugin effects by over 250 acclaimed developers.

NKS enables users to load instruments and effects, tweak parameters, browse and manage presets with tangible controls, keeping creators' minds and hands on the music. No time is wasted creating, saving, and resetting controller parameter mappings.

Key features include:
Unified Control: NKS maps plugin parameters directly to hardware controls, allowing for hands-on adjustments without navigating computer menus.
Efficient Workflow: It streamlines browsing, loading, and editing presets, enabling producers to stay focused on creativity.
Broad Compatibility: Many third-party developers support NKS, offering a wide range of compatible sounds and effects.
For Our Products: This integration allows Akai and M-Audio compatible devices to fully utilize all NKS workflow features.

Here are some key points to take note of:

Current users will receive the software bundle once they register their device.

Both existing and new owners will receive the software bundle once their hardware is registered.


NKS Software Partnerships

For years, Native Instruments has partnered with world-class software manufacturers, including Arturia, Heavyocity, Korg, Output, Spitfire Audio, and many more, to bring thousands of instruments and effects plugins into the NKS ecosystem. Together with Native Instruments' own instruments and effects, this creates the most extensive database of any auto-mapped hardware controller ecosystem.

Until now, NKS hardware controllers were only available from Native Instruments, such as the Kontrol S-Series and Komplete Kontrol A-Series keyboard controllers.

NKS Hardware Partner Program [New]

At NAMM 2025, NI announced opening up NKS compatibility for third-party, non-NI hardware, allowing millions of performers and producers worldwide to enter the NKS ecosystem.


***

Compact but powerful all-rounder for control over software, plugins and hardware. Typical high-quality Akai build, with a combination of keys, pads, rotary controllers and transport controls for versatility.

Supplier's Notes:
37-key MPK Mini keyboard with advanced connections and controls

The MPK Mini keyboard line revolutionized portable music-making for producers and beat makers all over the world. The new MPK Mini Plus builds on that innovation by empowering musicians with full creative control that delivers ultimate feel and expression, along with next generation performance tools. Advanced connectivity easily and fully unites all your favourite studio devices for complete and expanded hardware integration in a compact 3-octave design.

Full Portable Creative Control

While maintaining its compact footprint, MPK Mini Plus offers extensive controls providing deep command over a wide range of features. 8 velocity-sensitive RGB-backlit MPC drum pads are the backbone for not only playing dynamic beats and programming drums, but for also assigning pro-gram changes and triggering additional CC parameters. Dial in effects with the 8 assignable 360-rotary knobs for every function including filters, automation, pan controls, and more. For the first time on any MPK Mini, enjoy dedicated Transport controls for total integration into your DAW. Eliminate needless back-and-forth from your QWERTY keyboard or mouse and stay engaged in the creative workflow with dedicated Play, Stop, Record, Loop, and Locator buttons.

Ultimate Feel and Expression

As with all MPK Mini controllers, performance starts with the keys. MPK Mini Plus features 37 keys with the Gen 2 Dynamic Keybed for expanded melodic and harmonic creation. 3 full octaves mean more room for two-handed chords, arpeggiation, and laying down solos or soundscapes. The Gen 2 Dynamic Keybed features incredibly playable keys with a wider velocity range, delivering a world-class level of note dynamics and response. With more keys, your music will need new ways to add feel and expression, so the MPK Mini Plus adds dedicated Pitch Bend and Modulation Wheel controllers to help all keyboard performances truly come alive. Alongside the iconic Joystick Controller, there's no shortage of tactile interaction for near limitless expression.

Advanced Connectivity and Standalone Operation

For those spontaneous creative moments or quick jams sessions, MPK Mini Plus can operate with standalone functionality. The new polyphonic Step Sequencer is convenient for capturing new ideas on the fly. Record notes and drum patterns simultaneously for some serious standalone music creation. Connect to any Class-Compliant USB or 5-pin MIDI device and use the CV/Gate connectors to plug into your rack and other modular synths. The MPK Mini Plus is versatile enough for the serious beginner looking to grow their creative space, and also for those seasoned pros who want to get the most out of their studio gear.

Includes MPC Beats DAW for Mac and PC

The bundled MPC Beats software DAW for Mac and PC offers the iconic MPC workflow right on a desktop or laptop computer, and also includes thousands of sounds, drum samples, loops, and plugin instruments to create your next hit song. With more keys on the 37-note Gen 2 Keybed, MPC plugin instruments like Electric and Tubesynth will come alive with extended sonic range. Set the MPK Mini Plus on a desktop and connect with standalone MPC devices to control Mellotron and Hype plugins.

Even with 3 octaves, MPK Mini Plus will fit in your gig bag to easily transport alongside everyday music production items. It's simple math; adding MPK Mini Plus to any workflow equals expressive creativity and intuitive control for modern music creation and beat making.

Connectors
USB Type-B port
(5) 1/4" (3.5mm) CV Outputs
(2) MIDI DIN In/Out Ports
(1) Sustain input
Power Via USB type-B (bus powered or connected to wall adapter).

Dimensions (width x depth x height)
17.76" x 7.08" x 2.04"
45.11 cm x 18.0 cm x 5.2 cm

Weight
2.78 lbs.
1.26 kg

Notes: ***B-STOCK: Slight surface marks ***


Part of Sonicware's brilliant Liven series of affordable, creative groove boxes, the Ambient O packs in layers of drone, textures and noise sources to create engrossing soundscapes. Creative, experimental fun.

*** Firmware version 1.5 update- March 2025 ***

Temperament Settings for Each Track

In addition to the standard 12-tone equal temperament, you can now set 7 different temperaments per pattern, including Pure intonation, Pythagorean tuning, and Solfeggio frequencies.

64 Sound Pattern Palettes

Featuring 32 newly added sounds & patterns, along with 16 Sound Healing Vibes sounds.

Relaxation Playback Mode

Arrange your favourite patterns, set repeats and fade-outs, then let it gently fill your space with ambient sound. (Seamless pattern changes improved: if sound settings remain the same, transitions will now be smooth without audio interruptions.)

Master Tune Now Adjustable in Hz?Master tuning, previously adjustable in cents, can now also be set in Hz increments (410 - 470 Hz).

Line In Selectable on NOISE Layer

The NOISE layer can now be selected to Line In, allowing the application of Filter, LFOs, and other track-level controls to the input signal.

New LFO Waveforms & Assignment

Added three slow LFO waveforms (L.SIN, L.TRI, L.S.RN). Additionally, oscillator level can now be assigned as an LFO destination.

Pitch Bend Range Setting

You can now configure the pitch bend range in the system settings.

Changes in Oscillator Usage

Due to specification changes, the NOISE layer now consumes only one oscillator, while the ATMO 2 structure now consumes three oscillators.

Bug Fixes & Improvements

Fixed MIDI CC issues and addressed other minor bugs.


Supplier's Notes:
Your Personal Soundscape:

Conversations between Oscillating Tones and Your Mind

Immersive Ambient Generator

4 layers of tone and texture-Drone, Pad, Atmos, and Noise-merge to generate deep resonance and continuous transformation.

Ambient O (zero) is incredibly easy to use. Start by playing a tone from one layer using the note hold function. While listening closely, simply tweak the knobs to modify the tone and add other layers to shape a pleasing sound.

Blendwave Modulation Synthesis

Sonicware conducted extensive research into creating undulating and fluctuating tones for Ambient O, resulting in the development of a new wavetable-based synthesis.

Blendwave Modulation Synthesis combines 6 unique structures with 32 WAVEs featuring complex harmonic transitions, making it easy to create powerful low drones, lush pads, and transparent pizzicatos, perfect for Ambient Music.

4 knobs/8 parameters offer a wide range of tone creation.

A WAVE contains 128 harmonic tables, allowing for diverse tonal changes such as moving from basic waveforms to complex harmonics. The WAVE is represented by a yin-yang icon, with the yin representing moves in the reverse direction through the tables during modulation.

6 Structures - Each structure has a different number of oscillators and modulation circuits. ATMOS 1 applies ring modulation, while ATMOS 2 applies FM modulation.

Noise and Space

The Noise layer includes 8 specially selected nature sounds, offering noise blending, pitch adjustment and modulation to infuse unique spatial characteristics.

Additionally, it allows for up to 8 seconds of stereo sampling from the line input, letting you create personalized textures.

Extensive Effects Section

Ambient O is equipped with 9 types of lush reverb, each offering unique spatial dimensions and brightness settings. You can individually adjust the reverb send and shimmer send (for layering octaves) for each layer.

In addition to the reverb, the Ambient O offers an effect unit with Tape Delay, Reverse Delay, and 4 master effects; Overdrive, Bit/Rate Crush, Tilt EQ, and Stereo Chorus.

Sequence up to 64 steps per pattern.
Random playback of sequence phrases.
Probability of notes sounding can be set from 25 - 100%.
Program notes step by step or record them in real time. Additionally, you can also input notes to specific steps while the sequencer is playing to add variation.
Overwrite notes in real-time with one touch while playing back sequence phrases.
The Parameter Lock function allows you to record knob changes into your patterns. This can be recorded live, or programmed in step by step.

Specifications

[Synthesiser]

- Note Hold function
- 128 Sound Pattern Palettes (incl. 16 types of preset palettes)
- Mixing including level/pan for each layer
- Layer (Sound) copy and paste function
- Tune All function changes the pitch of all layers (i1 octave in 20-cent steps, adjustable in 1-cent step)
- Standard polyphony: 10 voices (depending the structure's oscillators x simultaneous voices)

4 Layer Construction
Drone, Pad, Atmos Layers
- New Blendwave Modulation Synthesis for creating undulating and fluctuating tones
- 6 Structures, 32 Waves
Drone 1: 2 oscillators, modulates Detune
Drone 2: 2 oscillators, modulates Harmonics
Pad 1: 3 oscillators, modulates Harmonics
Pad 2: 3 oscillators, modulates Harmonics
Atmos 1: 1 oscillator, ring modulation on output
Atmos 2: 2 oscillators (frequency modulation), modulates Pitch

- Polyphonic mode
- Mono mode (adjustable glide time)
- Legato mode (adjustable glide time)
- Unison mode (adjustable detune)
- Arpeggiator modes (Up, Down, UpDown, DownUp, Up&Down, Down&Up, Up+1, Up+2, Down-1, Down-2, Random, Play Order)

Noise Layer
- 1 Structure, 8 Waves
Noise: 1 oscillator, modulates Pitch
- Loop or One-shot playback, White noise mixing
- 16bit - 32kHz Linear PCM sampling (stereo)
- Up to 8 seconds of sampling per sample (crossfade settings from 1 to 4 seconds)
- Auto start sampling function with the input level (input level can be set)
- Import and export of a slot of samples (via MIDI)
*Import of audio files from PC/Mac is not supported.

- Polyphonic mode
- Mono mode (adjustable glide time)
- Legato mode (adjustable glide time)
- Arpeggiator modes (Up, Down, UpDown, DownUp, Up&Down, Down&Up, Up+1, Up+2, Down-1, Down-2, Random, Play Order)
Each layer has its own envelope, filter and 2LFOs.

- Attack
- Release

- Low Pass Filter
- High Pass Filter
- Band Pass Filter

- 2 LFOs assignable to various parameters (individually adjustable)
- Adjustable LFO Shapes and trigger count

[Effects]
9 types of high-quality reverb (Send amount to reverb and shimmer adjustable per layer)
- Small.L
- Small.M
- Small.H
- Large.L
- Large.M
- Large.H
- Infinity.L
- Infinity.M
- Infinity.H
6 types of diverse master effects
- Tape Delay
- Reverse Delay
- Overdrive
- Bit/Rate Crush
- Tilt EQ
- Stereo Chorus
The above reverb and master effects can also be applied to external sources from the LINE IN.

[Sequencer]
- 4 tracks (1 track on each layer)
- Up to 64 steps per pattern
- Step length can be set from 1/1 to 1/32 or 2/1(Breve) to 8/1(Maxima)
- Real-time recording
- Overwrite REC function for real-time sequence replacement
- Directly enter notes for each step when playback is on or off
- Enter longer notes (Tied notes)
- Metronome and pre-count function
- Step copy and paste function
- Track copy and paste function
- Duplicate to extend a sequence
- Transpose function
- Pattern BPM / Global BPM can be set
- Pattern chain function (Loop playback possible)
- Track level and pan can be set independently
- Parameter Lock function to record parameter settings for each step
- Sound Lock function to record sound settings for each step
- Note playback probability can be set from 25 to 100% for each step
- RANDOM function to play back steps in random order

[MIDI]
- Notes, control changes, clock input/output
- Import and export user data
- Firmware update via Sysex

[Unit]

27 keys (with a hold function)


- 15 physical control knobs
- Optional LATCH function prevents jumps in value when knob position and parameter values do not match.
- One physical encoder for fine adjustments.
- LCD dot indicates when a parameter value matches the saved value, or when the value has been changed.

Notes: PCF-DL10: 10 cm

The EBS PCF flat patch cable is an original design by EBS that started the global trend of flat patch cables for pedalboards. Due to the clever space-saving design, the cables have become the patch cable-to-go for musicians all over the world.

If you have ever struggled with limited space on your pedalboard, the super compact and affordable EBS Flat Patch Cables will help end the frustration. They perform excellently on sound and flexibility while reducing the required space between pedals to a minimum with their unique design.

The new PCF Deluxe (PCF-DL, some stores refer to it as PCF-DL10G, etc.) series is the second implementation of improvements since the original design. It remains the most affordable among EBS flat patch cables.

New features since October 2021:

30% reduced size contact housing.
24K gold-plated tip of the contacts for best performance.
Features shared with the previous version:

Double-shielded cables and very low resistance keep your signal path clean and strong through the pedalboard.

Very compact size and flexible cables ensure effective use of ALL space on your pedalboard.

Since their introduction, these cables have created space on pedalboards for thousands of customers worldwide. We hope you will become one of them too.

Buy the cables at local stores and online dealers all over the world.

Notes: ***B-STOCK: Box damaged, product in perfect working order***


Deeper. Louder. More accurate.

iLoud MTM MKII offers sonic perfection and volume levels previously unavailable in this class of reference monitors. Maintaining its iconic form, MTM MKII sports more efficient drivers and twice the processing power under the hood to turn any space into the ideal mixing and mastering setup.

Enjoy clear, neutral sound with the deep, controlled low end you'd expect from a speaker twice the size and linear phase response that rivals speakers twice the price. Its MTM design and precise time alignment make hours of fatigue-free listening possible while minimizing acoustic interactions, which is ideal for desktop use.

With advanced ARC auto-calibration, MTM MKII guarantees improved acoustic performance in any space in seconds. Connected to a computer, award-winning X-MONITOR software adds deep customization and breathtaking emulations of 20+ top studio monitors and other playback systems to A/B your mixes instantly for the perfect translation.

MTM MKII is like having an entire suite of precision-tuned monitoring tools.

Ultra-nearfield monitors for critical mixing

iLoud MTM MKII features a pair of 3.5" high-performance woofers and one 1" high-definition, back-chamber loaded tweeter with improved speaker drivers for superior volume and low end, plus improved clarity and articulation in the midrange. The Midrange-Tweeter-Midrange symmetrical design (D'Appolito configuration) provides ultra-precise, defined, point-source sound that can't be achieved by traditional 2-way systems at close distances, meaning you'll mix better and with less ear fatigue.

Designed to work faster in more situations

In addition to improved speaker drivers, iLoud MTM MKII maintains tight vertical dispersion, minimizing the acoustic impact of desktop placement and ceiling and floor reflections to ensure the most accurate possible sound. MTM MKII offers a wider horizontal dispersion, creating a broader sweet spot for easier mixing than other MTM designs while maintaining the smoothest in-room response. Better power efficiency and extended max SPL mean iLoud MTM MKII also offers superior performance as an FOH mixing monitor, immersive speaker or other volume-dependent tasks.

Next-generation ARC room correction

iLoud MTM MKII adds a deeper, more comprehensive ARC auto-calibration derived from IK's flagship iLoud Precision series. Connected via USB to a Mac/PC with X-MONITOR, this 4-space measurement offers an unmatched definition and reliable translation in virtually any environment, so your mixes will always sound their best. A rapid, single-point measurement option can be done anywhere without a computer. Connect an ARC MEMS microphone (sold separately) to each speaker's mic input, and you'll be up and running in moments.

X-MONITOR integration

Also inherited from IK's flagship iLoud Precisions, iLoud MTM MKII now offers full X-MONITOR integration. This exclusive, award-winning software gives you complete control over every speaker element beyond the rear controls. Also, it allows for precise delay compensation between units for improved stereo imaging.

A single solution to A/B mixes

In addition, X-MONITOR allows you to switch between virtual monitoring voices, emulating the frequency and phase response of other top studio monitors and reference systems. With 4 buttons to quickly recall various voices, X-MONITOR with MTM MKII becomes an entire reference monitoring system in one elegant solution.

Stereo to immersive sound anywhere

IK Multimedia packed all this technological sophistication into a compact format that takes up 30% - 50% less space than comparable designs and weighs just 5 pounds. With tilting desktop mounts included, it's the ideal desktop solution for home, project or mobile recording. There's also an included isolation pad for horizontal placement wherever needed.

Bottom mic stand mounts securely position iLoud MTM MKII behind a console for studio or FOH use or even on boom arms to create immersive setups anywhere quickly with no tools required. A custom mounting bracket is also available to easily install MTM MKII as overheads or wall speakers in any studio.

The ideal immersive audio solution

All these amazing features, plus a selectable 80 Hz low-frequency cutoff, also make iLoud MTM MKII the ideal monitor for today's immersive studios.

Specs

iLoud MTM MKII Specifications
Type: 2-Way/3-speakers bi-amped, digitally controlled studio monitor
LF drivers: 2 x 3.5" composite cellulose fiber, custom-made mid-woofers
HF drivers: 1" low distortion, back chambered silk dome tweeter
Acoustic design: DSP tuned bass reflex
Number of amps per speaker: 2
Amplifiers type: High efficiency Class-D
Total power: 100 W RMS
LF power: 70 W RMS
HF power: 30 W RMS
Crossover type: Digital, linear phase
Crossover frequency: 2.8 kHz
Frequency response: 48 Hz to 28 kHz +/- 2 dB, 36 Hz to 32 kHz @ -10 dB
Phase response: System remains coherent within +/- 15- from 200 Hz to 20 kHz
Sensitivity at +4 dBu: -6 dBu signal generates a 94 dB SPL @ 1 m
Sensitivity at -10 dBV: -17 dBu signal generates a 94 dB SPL @ 1 m
Continuous, long term SPL free field, 1 m distance, one speaker, ANSI-2034 Weigthed Pink Noise: 97 dB
Peak SPL free field, 1 m distance, one speaker, ANSI-2034 Weigthed Pink Noise: 110.5 dB
Peak SPL, half space, 1 m distance, one speaker, ANSI-2034 Weigthed Pink Noise: 112.5 dB
Placement setup: Manual switches for LF Extension, LF trim, HF trim, Desk position
LF extension switch: Sets -3 dB point of the frequency response at 40, 50, 60 or 80 Hz (LFE)
LF switch: Low shelf, +2 dB or -3 dB from 100 Hz down
HF switch: High shelf, +2 dB or -3 dB from 8 kHz up
Desk switch: -4 dB at 160 Hz and +1 dB at 1.8 kHz
Calibration: Fully automatic and built-in digital calibration
Full DSP control
Total Latency (TOF): 2.44 ms
Connectors: 1x combo XLR-1/4" TRS balanced input; 1/8" TS ARC microphone input, 1 x USB type-B, AC POWER socket
Power requirement: 90 to 240 V AC, auto-ranging, 50 or 60 Hz, 120 W max power consumption

Dimensions

Size: 264 mm/10.39" x 160 mm/6.3" x 130 mm/5.12"
Weight (per speaker): 2, 5 kg/5.5 lbs (speaker + foot)

Package includes

1 x iLoud MTM MKII monitor
Power cord
Tilting stand
Horizontal support feet
Locking key
USB-B to USB-A 2.5 m/8.2 ft. cable

Notes: ***B-STOCK: Box opened, product in perfect working order***


12-channel version of Tascam's modern take on the classic Portastudio concept. Digital recorder fused with analogue mixer and audio interface. Great one-box recording solution.

Supplier's notes:
Integrated production suite for music and multimedia creators, songwriters and performers.

Tascam Model 12 is a compact all-in-one integrated mixing and recording suite designed for music and multimedia creators, songwriters and performers. It consists of a 10-input mixer, a 12-track version of the highly acclaimed Tascam multi-track audio recorder, USB audio interface, MIDI connectivity, DAW control functions, and unique podcasting capability including mix-minus and smartphone input.

Combining the feel of an analogue user interface with the efficient workflow and pristine quality associated with digital recording and production, the compact and affordable Model 12 supports your creative process from start to finish.

Notes: ***B-STOCK: Box opened, product in perfect working order***


Meet Xkey Air - the ultimate mobile MIDI keyboard, able to go wherever the music takes you. Featuring an ultra-slim lightweight design, Xkey Air is made for creation wherever inspiration strikes you. From the studio to your living room and everywhere in between, this keyboard brings professional performance anywhere. Simply link Xkey Air to your device and
play along with the best apps and recording software. Xkey Air is a fully class compliant, USB and Bluetooth MIDI controller that works with all MIDI apps on virtually all platforms.

Notes: ***B-STOCK: Box opened, product in perfect working order***


Enlightening

Elevating the groundbreaking optical compression of the original Philosopher's Tone to a new plane of tonal enlightenment, the Philosopher's Tone 2 is a world-class compressor/sustainer with footswitchable Grit, allowing for more versatility than ever before. Featuring a refined implementation of the overdrive circuit first heard in the limited-edition Gold version of this iconic compressor pedal, the unique germanium distortion found in the Philosopher's Tone 2 delivers smooth top end and rich midrange response, tailored to perfectly match the characteristics of the optical sustainer driving it. In addition to Volume and Sustain controls, the Philosopher's Tone 2 features a parallel clean Blend knob that allows musicians to mix their instrument's original tone with the compressor/sustainer effect when the Grit circuit is bypassed. This mixing technique restores natural pick-attack and allows clean settings with extreme sustain to remain dynamic and musical. When the Grit circuit is engaged, the Blend knob is automatically bypassed, circumventing the compromises of the original unit and imparting a colourful distortion to your sound in both Germanium and Silicon modes. This nonlinear diode-clipping can range from subtle overdrive to overflowing distortion, all without unwanted feedback. A Treble control located just before the master Volume provides 6db of cut or boost at 2kHz for fine-tuning the frequency response of the effect. The Philosopher's Tone 2 features true-bypass switching and internal 18V power rails for maximum clean headroom that is ideal for use with hot pickups, active bass, synthesisers and other line-level sources. Runs on 9VDC.

Knob-by-knob

Volume: Sets the overall output volume.
Treble: Boosts or cuts treble at 2kHz.
Sustain: Sets the amount of sustain.
Blend: Mixes your compressed effect with your clean signal. Note: This control is only active when the Grit footswitch is turned OFF.
Grit: Controls the gain of the overdrive stage. Note: This control is only active when the Grit footswitch is turned ON.

Rare design

Generations of guitar players have sought noiseless clean sustain from a compressor, and this was the guiding goal of the research and design behind Philosopher's Tone, yielding a compressor with an internal 18 volts of headroom and naturally musical tone control.

The evolution of Philosopher's Tone

First released in 2009 and igniting a new following for Pigtronix, the Philosopher's Tone 2 is a "best of" design, incorporating the best elements of previous iterations plus a completely redefined Grit knob for significantly more versatility.

Modern-day alchemy

Practitioners of the mystical and ancient art of alchemy long sought an element called the Philosopher's Stone. They believed, if found, it could turn lead into gold and bestow immortality upon the person who wielded it. Philosopher's Tone 2 allows players to conjure gleaming sustain, soaring lead tones, and articulation across all six strings.

Model name: Philosopher's Tone
Function: Optical Compressor Sustainer
Category 1: Compression
Bypass: True Bypass

Electronics

Voltage: 9VDC
Current draw: 100mA
Input impedance: High
Output impedance: 150ohms

Body
Length (inches): 1.5
Width (inches): 3.75
Height (inches): 1.75
Weight (lbs): 0.5

Notes: Contains two ear cushions, two inlays, one screwdriver

Notes: 3 meter cable compatible with the Austrian Audio Hi-X65/Hi-X55/Hi-X50.

Notes: 3 meter cable compatible with the Austrian Audio Hi-X20/Hi-X15

Notes: 1.2 meter cable compatible with the Austrian Audio Hi-X60.

Notes: Includes: 2x Ear Cushions for Hi-X50, 1x Bow Pad for Hi-X50, 1x Mounting Tool.

Notes: Includes: 2x Ear Cushions for Hi-X55, 1x Mounting Tool.

Notes: Includes: 2x Ear Cushions for Hi-X50, 1x Mounting Tool.

Notes: Includes: 2x Ear Cushions for Hi-X65/Hi-X60, 1x Mounting Tool.

Notes: 1.2 meter cable compatible with the Austrian Audio Hi-X65/Hi-X60/Hi-X55/Hi-X50.

Notes: Includes: 2x Ear Cushions for Hi-X65/X60, 1x Bow Pad for Hi-X65/Hi-X60, 1x Mounting Tool

Notes: Carry Case for for the Austrian Hi-X65/60/55/25BT/15/PG16

Notes: 3m long cable compatible with the Austrian Audio Hi-X15/Hi-X50/Hi-X55/Hi-X60/Hi-X65.

Notes: ***B-STOCK: Box opened, product in perfect working order***


Punch is the ultimate VCA-DECAY module for Eurorack

Specially designed to generate dynamic percussive sounds but also capable of basslines, leads, envelopes and more. The VCA has a built in voltage controlled Decay envelope that can be turned from smooth to more aggressive exponential responses and can be activated with triggers, gates or cv's.

Punch features two modes per channel to play, with a dedicated switch control: "vintage style drum machine mode" and "dynamic cv mode"

Punch is capable of creating AM sounds with control voltage on the "amount"

Each envelope can be inverted via dedicated switches on the front panel.

If you use an inverted envelope alongside the accent input you can create ducking effects like side-chain compression..

INSTALLATION:
* Disconnect your synth from the power source.
* Double check polarity from the ribbon cable, unfortanetly if you damage the module by powering in the wrong direction it will not be covered by the warranty.
* After connecting the module check again you have connected the right way, the red line should be on the -12V.

Notes: Bringing the sound of the legendary Roland Jupiter-8 crashing into Eurorack, the ISE-NIN is Black Corporation's 100% analogue monophonic synth voice, derived from the mega eight-voice ISE-NIN desktop synth.

Supplier's Notes:
(ISE-NIN) VOICE brings the legendary Japanese discrete analogue sound into a compact 100% analogue Eurorack creation. Ideal for combination with an x0x techno rig, the full depth of rich sonic potential and programmability of ISE-NIN can now be patched into new modular concoctions. A full complement of iconic analog oscillators, filters, envelopes, and modulation make this at once a full-featured semi-modular synth on its own, and a powerful addition to any rig with the addition of ISE-NIN BREAKOUT.

Two Oscillators with Deep Modulation

This is a no-compromise compact recreation of a complete voice - lacking only the desktop synth's polyphony. Two oscillators each include multiple waveforms (triangle, ramp, pulse, and square on the VCO-1, with sine and noise replacing triangle and square on VCO-2). Hard sync is available, as is configurable modulation, with dedicated PWM (controlled manually, via LFO, or via envelope 1), and tweakable modulation amounts from both LFO and envelope 1 to VCO-1, VCO-2, or both. The LFO section provides access to waveform (sine, saw, square, random), rate, and delay.

Unmistakable Filter, Dual Envelopes, Musical Control

The unique classic 80s Japanese filter sound is fully embodied here, with highpass filter, lowpass with two slope options (-12 dB, -24 dB), and resonance, all with their own controls. Dual envelopes, each with four stages, are assignable to the filter, VCO modulation (ENV-1), and VCA (ENV-2), with an envelope mod fader. Envelope 1 also sports a polarity switch. As with our desktop synths, musical control is front and center, literally: you'll find dedicated controls for toggling keyboard input to each envelope, a keyboard amount to VCF fader. If you're using ISE-NIN alone as a voice, you'll have access to 1v/octave and gate inputs with glide control.

Unprecedented Patchability

Start with ISE-NIN VOICE (36HP), and you'll already have a deep semi-modular instrument on its own. But add ISE-NIN BREAKOUT (22HP), and you can place every single control under one-to-one voltage control for unmatched patchability and programmability. This is a level of sound possibility that could would normally require investing in several rows of modules; here, they're all readily accessible on one convenient, compact front plate. Not only do you get dedicated inputs for the oscillators, filters, and each separate envelope stage for both of the two envelopes, but there are separate FM inputs to each oscillator and every possible routing of the LFO, envelope, and keyboard. XMOD amount and VCO-2 quantized range each get their own input.

Power consumption: 110mA at +12V and 30mA at -12V

Depth: 38mm

36 HP

Notes: Breakout for the ISE-NIN Voice

Extensive outputs, open-ended Functionality

The output section of the ISE-NIN BREAKOUT is a perfect match for the voice. Each waveform for each oscillator has its own independent instrument, as does each envelope and the inverse of envelope 1, each filter and slope, each LFO waveform, noise and low noise, and mix. There's also a dedicated headphone output so you can enjoy ISE-NIN without waking the neighbours. You'd be hard pressed to find as much tonal range, as many distinctive vintage Japanese tones, or as much expandability with as much horsepower as ISE-NIN VOICE and its BREAKOUT.

Notes: Sonora is a spectral mixing output module that aims to be the ultimate sound stage of a modular setup. A place where all your mixes meet and find a stereophonic solution for your final track thanks to its twelve fixed panning inputs that allow you to give each track its own space and importance in the stereo field.

While being a 12 inputs summing mixer, Sonora also features a LED meter, a soft clipping limiter circuit at the output stage, a headphone output section with loudness indicators and 3.5mm pro line output jacks.

Notes: Explore malleable sound. Mold, carve, bend.

The S-4 is a sculpting sampler designed to capture and transform sounds. Merging tape-era workflows with cutting-edge technology, the S-4 redefines sound mangling by providing a futuristic platform for crafting unique soundscapes and compositions, using samples and real-time audio processing.

S-4 is a tool made for sonic explorers. It has four parallel stereo tracks, each with an audio engine featuring a chain of audio devices including samplers, live granular processing, morphing resonators, and a range of audio effects. A novel modulation system allows anything and everything to be modulated with four modulators per track. Capture sounds on the fly with the onboard microphone and stereo line input, or load samples from the 4GB internal flash storage.

Use cases

The S-4 is a versatile powerhouse, capable of serving as an effects processor, transformative sound designer, tape machine, live looper, classic sample player, or textural synthesizer.

Tape machine

Capture your surroundings. Use S-4 as a transformative four-track tape machine.

Effect processor

Manipulate live audio, and add colour and textures to your beats, melodies, and sounds

Midi controlled sampler

Hook up a MIDI keyboard or sequencer and use S-4 as a powerful textural synthesizer and sample player.

Audio engine

Push the creative boundaries and transform audio into uncharted depths. S-4 has four parallel stereo tracks, each of which contains a chain of five audio devices tailored to cover specific sonic areas and applications. Create everything from glittering textures to broken soundscapes or evolving synth sounds.

Together, the devices form a playful toolbox for sculpting sample material and live audio.

Material

Stereo tape and sample players with live audio and looping capabilities.

Granular

Live granular processing with time-warping and pitch-shifting algorithms.

Filter

Morphing resonator: 48-band tuned filter bank with animation, tonal control, and classic filter functions.

Colour

Collection of destructive effects including bit crushing, drive, and compression.

Space

Combined reverb and delay with pitch-shifting and shimmer.

Modulation system

Animate and bring life to any parameter using the rich and unique modulation system. Each track has four configurable modulators that can be mapped to any parameter with unlimited mapping destinations. It is even possible to do cross-modulation between modulators. Choose between a range of different modulators from complex LFOs, and generative sequencers to envelopes.

Capture your surroundings

Utilize the built-in microphone to record sounds, sample and loop your external gear with the stereo line input, resample the internal tracks, or effortlessly load samples from the S-4's flash memory or an external drive.

Versatile powerhouse

The S-4 is designed with durable RGB buttons offering tactile feedback and a high-quality 3.5-inch LCD display ensuring all the visual feedback you need. It features USB connectivity for seamless connection to class-compliant devices and effortless file transfers to and from your laptop. Moreover, it can function as an audio interface when you require a simplified setup. You can also expand the number of inputs and outputs by connecting a class-compliant external USB interface.

Technical specifications

Audio engine features

4 parallel stereo audio tracks
Tape player with live looping capabilities
Polyphonic sample player
Live granular processing with time-warping and pitch-shifting algorithms
Morphing resonator (48-band filter bank)
Bit crushing, drive, and compression
Combined reverb and delay with pitch-shifting and shimmer

Modulation features

4 modulators per track
Modulate any parameter of the audio engine
Modulator types:
- Complex LFOs
- Generative sequencing tools
- Envelopes

Hardware

Quad-core 1.5 GHz processor
4 GB flash memory (sample pool)
24-bit / 48 kHz stereo audio in and out

I/O

2 line-inputs
2 line-outputs
Built-in microphone
Stereo headphone output
MIDI in/out
Analog sync in/out
USB-C

Miscellaneous

WiFi - Ableton Link
Class-compliant USB audio interface
Expandable number of inputs/outputs with class-compliant USB interfaces

User Interface

High-resolution LCD colour display, 3.5 inch
21 tactile RGB buttons
9 high-quality endless encoders

Physical

Matte black aluminium casing
Dimensions: 242 x 156 x 39 mm (9.5" x 6.1" x 1.5")
Weight: 820g (1.8 lbs)

Notes: Big brother to the excellent MicroFreak, the MiniFreak is a hugely impressive hybrid synth, teaming dual digital sound engines with analogue filters for creative approaches to polyphonic sound.

Supplier notes:
MiniFreak is a 6-voice polyphonic hybrid keyboard that fuses two digital sound engines with analog filters, outside-the-box sequencing, and instant-access modulation in a playful, curious, and sometimes unpredictable way. MiniFreak encourages users to escape the ordinary and explore the unconventional with a 37-note velocity-sensitive keybed with aftertouch, weave intricate evolving performances with multiple modulation lanes, and discover endless sweet spots with a built-in digital FX engine - a wildly creative experience.

Unprecedented hybrid polyphony

With over 20 modes to choose from including Virtual Analog, FM, and Additive, the interplay between MiniFreak's two oscillators can result in truly unique compound sonic behavior. With 6-voice polyphony, analog filters, and the ability to process engine 1 through engine 2, MiniFreak puts premium polyphonic synthesis exploration into a compact & tactile instrument that's as addictive as it is powerful.

Customizable & experimental sound design

Embellishing the popular Freak modulation matrix, MiniFreak gives users even more control over shaping, transforming, and evolving their sound, with features like polyphonic ADSR envelopes, customizable multi-segment LFO shapes, FM & Ring Modulation, and the familiar Spice & Dice randomization.

Mix-ready stereo sound

MiniFreak comes with stereo outputs and 3 digital FX slots with 10 FX types to choose from. From stereo-enhancing chorus, to surgical 3-band EQ, to gritty 6-mode distortion, users will have everything they need to push their sound over the edge while keeping it mix-ready.

Expression, meet chaos

Despite its penchant for wild & exploratory sound design, MiniFreak is also built as a responsive instrument of expression. Its velocity-sensitive 37-note keybed with aftertouch and spontaneous Seq/Arp functionality makes it a dream to perform with, while its randomization features and modulation lanes put playfulness and sonic momentum immediately at users' fingertips.MiniFreak VMiniFreak comes with a dedicated VST counterpart, letting users totally integrate its unique hybrid sound into their DAW productions and vice versa. Using identical sound engines and architecture, it offers a like-for-like virtual experience of the synth itself, at no extra cost.

What's in the box:

Box content
MiniFreak Unit
Universal PSU - 12V 1A
USB A to USB 2.0
Registration card

Instrument dimensions
Size : 22.75 x 9.09 x 1.57 inches (578 x 231 x 55mm)
Weight : 6.48 lbs. (2.94 Kg)

Notes: A High quality MIDI cable for connecting music controllers and devices together. Strong and flexible cable with low loss conductors and global shielding ensure a clean data stream. Terminated at each end with a 180 degree 5 pin DIN plug.

Notes: Universal power supply for all Sonicware LIVEN devices:

9V - 2A - center plus polarity
EIAJ 3 connector (1.7×4.75×9.5mm)
incl. adapter set EU/US/UK/AU

Notes: The latest in 1010's innovative range of compact devices, the Bento is a fresh take on sampling and sequencing, offering an alternative to conventional options such as Akai's MPC series. Pure standalone creative flow.

Supplier's notes:
Sample Every Flavour

Bento is a portable, all-in-one sampling production lab that brings together flexible sequencing, expressive performance tools, and pro-level connectivity-perfect as the centrepiece of your desktop or mobile rig. Whether you're looping on the go, launching clips live, or sequencing your entire synth setup, Bento gives you the tools to shape your sound from idea to performance.

With pristine 24-bit sound quality, a bright 7" touchscreen, 16 responsive pads, and deep control over samples, MIDI, and effects, Bento offers a fast, fluid workflow in a compact and portable form. Sequence one-shots, build multi-sample instruments, and chop loops using Bento's flexible tracks, scene-based sequencing, and expansive modulation and FX engine.

Designed to replace laptops, simplify cabling, and integrate seamlessly with your gear, Bento features multiple stereo inputs and outputs, USB-C host and device ports, dual TRS MIDI I/O, and a built-in battery for up to 3 hours of mobile creativity.

Recording Capabilities

Capture loops quickly with the option to synchronize the start and stop times to the clock
Trigger recording via audio level threshold
Create perfectly sized loops by setting the recording length
Enable immediate playback after recording for live looping capabilities
Make recordings up to 4 hours in length
Resample the master output without patching
Store recorded samples as WAV files on the micro SD card

What's included

bento - sampling production lab
MicroSD card with over 160 patches and over 200 wav files
USB C power cord
USB C power and data splitter
Type B TRS MIDI To MIDI 5 Pin DIN adapter
QR Code with link to the Quick Start Guide

Technical Specs

8 tracks with multiple patch types-sample banks, multisamples, slicers, granular, loops, and external MIDI
16 pressure- and velocity-sensitive pads
7" diagonal touch screen
8 context-sensitive endless encoders
3 stereo inputs, 3 stereo outputs, 1 stereo headphone out
2 TRS MIDI inputs & 2 TRS MIDI outputs (Type A & B)
USB-C host and device ports
Internal battery with 3 hours in low power mode
Includes 155 Patches and over 5000 sample files
Expandable via microSD card
24-bit ADC/DAC
MIDI sequencing, modulation, and CC control support
Compatible with 100 x 100 VESA mounts
Product dimensions: 8" x 8.5" x 2", 2 lb (20.4 x 21.8 x 5.1 cm, 936 grams)
Package dimensions: 10.25" x 8.5" x 2.75", 2.7 lb. ( 26 x 21.6 x 7 cm, 1.2 kg)

Notes: 'Pamela's PRO Workout' is a compact programmable clocked modulation source for your Eurorack modular system. It provides 8 highly editable outputs producing various control voltage signals correlated and synced to a BPM based master clock.

Each output can provide everything from simple clocked triggers, complex rhythmic waveforms, quantised melodic patterns to random chaos with direct and assignable CV control over numerous parameters. These features together with a quick and easy to use interface provide almost limitless synced modulation possibilities in a tiny space.

Building on the original 'Pamela's Workout' & 'Pamela's NEW Workout' the evolved 'PRO' Pam maintains the precursor's form factor and intuitive workflow but improves and adds many new features with upgraded hardware, more CV inputs, a new full colour hi res display and rewritten software adding many new enhancements like micro grid timings and cross output modulations.

Through optional expander modules more CV input and outputs can be added with support for external non euro equipment through Midi and Din Sync outputs. Please enjoy your next generation PRO workout!

Size: 8HP
Power: +12v 60ma / -12v 10ma
Depth: 32mm (approx with power header)
Outputs: 0-5v buffered low impedance. 12 bit res. 3.8khz max update freq.
Inputs: CV 0v-5v / Clock, Run - rising edge 700mV min.

Notes: A creative new approach to sampling, the first release from Teenage Engineering's EP Series is an evolution of the PO-33 K.O! Pocket Operator. Sample, program, sequence and produce in one comapact, retro box.

*** OS 2.0 firmware update- April 2025 ***

Resampling
Song mode
Sidechain
More polyphony
More MIDI

K.O. II just got its first major OS update! Teenage Engineering have managed to pack a ton of new knockout features like resampling to remix and chop sounds, sidechain for groove control, song mode to arrange tracks of up to 9,801 bars, an optimized playback engine with increased polyphony, plus extended MIDI support.

Resampling

Sample any sound source on or off the K.O. II, process it through effects and make a brand new sample from it.

Song mode

Song mode adds the ability to chain scenes and create longer, more structured track arrangements.

Sidechaining

Sidechain allows one sound to control the volume of another, perfect for kick and bass groove control.

More polyphony

Teenage Engineering have managed to increase K.O. II's voice count, now supporting 16 mono or 12 stereo voice polyphony.

More MIDI

Pass notes between units with MIDI thru, keep your gear in sync and pair up to16 devices simultaneously.

Supplier's Notes:
Get ready for Round 2

Meet the next evolution of the world's most sold sampler. Based on the legendary PO-33 K.O!, the new EP-133 K.O. II adds more power, more sampling capabilities, a fully reworked sequencer and brand new punch-in 2.0™ effects. Introducing a workflow that lets you go from idea to track faster than ever. It's pocket operators gone pro.

The champ is here

A versatile machine with an impressive set of features, K.O. II is the new champion in and outside the studio. Unrivaled by anything in its class, this is the sampler you've always wanted.

Record sounds around you, sample your voice, favorite synths, vinyl records or whatever audio that you've got on your phone.

Sequence your samples and loops. Make use of the curated selection of drums, bass and keys that come pre-loaded on your K.O. II.

Tweak and automate things like filter, pitch and more... add stereo effects, compressor and next generation punch-in effects.

Knock out features

9 projects each with 80,000 notes
Projects contain 4 groups, each with 99 patterns
Patterns have 12 tracks for samples and midi
Variable pattern length per group (1 to 99 bars)
12 mono / 6 stereo voice polyphony
Use groups to mix and match patterns on the fly
Record and automate all 12 fader assignments
Sequence in free time or quantized with swing
Assign any pad to one of 16 midi channels
Loop mode from OB-4 with length and slide
12 pressure and velocity sensitive pads
Instantaneous time correction and erase
Slice samples live or automatically
Stereo / mono sampling at 46.875 kHz / 16-bit
Punch-in 2.0: effects (pressure sensitive)
Arrange quickly using the instant commit feature
32-bit float signal chain, 24-bit ADC/DAC
Sync io for ext. Gear. 8th, 16th note or sync24
6 built-in send FX and a master compressor
Drag and drop samples using the sample tool

The sequencer engine of the K.O. IIO provides an intuitive, fast way of building up beats and variations using 4 groups x 12 patterns. Like most DAWs, you can instantly swap patterns per group, experiment with different combos to find what beat and bass lines work together. The commit button helps you freeze a point in time and move on, adding a verse or a break. It all happens in real time while playing.

Built-in mic and speaker
USB-C
Midi output
Midi input
Sync output
Sync input
Audio input
Audio output
4x AAA batteries

One-two punch

Vintage style keys with a modern touch, combining tactility with pressure sensitivity.

10" EP format

Comes in a limited edition 10" collector's box

Tech specs:

K.O.II highlights

Sampling frequency: 46 kHz / 16-bit
Internal signal chain: 32-bit
999 sample slots
64 mb memory
Preset samples
High resolution sequencer
Built-in FX
Fader and pressure sensitive pads
Six stereo voices, twelve mono
Runs on 4x AAA batteries with the option to be powered via USB-C

Dimensions and weight

240 mm x 176 mm x 16 mm
9.45" x 6.93" x 0.63" inches
620 g / 22 oz

Stereo input

24 bit
SNR: 96 dba
Analogue gain: 0 - 12 dB
Max level: 8 DBU, 2.0 VRMS

Stereo headphone/line output

24 bit
SNR: 98 dba
Max level: 5 DBU, 1.4 VRMS

MIDI input and output
TRS type A, MMA compliant

Sync input and output
Sync 8 ppm, 16 ppm, 24 PPQN
Start / stop

Notes: The Decksaver cover for the Ableton Move is the ultimate accessory for protecting your gear while preserving its sleek aesthetic.

Precision-moulded from ultra-durable polycarbonate, this cover is designed to shield your Move from dust, spills, and accidental impact without compromising accessibility.

Whether you're transporting it to a gig, storing it in your studio, or simply keeping it safe between sessions, the low-profile design ensures a snug fit and hassle-free use.

Engineered with the same attention to detail as the Ableton Move itself, the Decksaver cover combines robust protection with a clear, professional finish that showcases your gear.

Dimensions

Weight: 0.38 kg
Length: 15.2 cm
Width: 31.9 cm
Height: 3.8 cm

Material: smoked polycarbonate

Notes: A high-quality, custom Eurorack patch cable and bundled them in handy packs of four (4).

Instead of rainbow packs, each colour will be linked to a specific size, offering extra convenience for patching and sorting cable lengths.

Each pack of four comes with a custom velcro cable tie and is attached to a cardboard display hangar, in an effort to reduce plastic packaging where possible.

Notes: Erica's superb Perkons returns with a stealthy new black paint job. Four hybrid voices each with a range of different sound engine modes, paired with analogue filters, overdrive and a superb sequencer.

Supplier's Notes:
PERKONS HD-01 is a unique live performance and sound design instrument that tears down the borders between drum machine, synthesizer, and drone instrument.

PERKONS features four sonically versatile hybrid voices (digital sound engine + analogue multimode filter with overdrive) and a sequencer with simultaneous control over all four percussion tracks.

Each voice has 3 sound engine modes, an HP/BP/LP filter and 8 controls for nuanced sound design, including an internal BBD FX send. All voice parameter settings can be saved as KITS. To add dynamics to the performance, parameter automation is implemented and a modulation LFO can be assigned to all parameters.

For a real thunderstorm, integration with external gear is considered - each voice has a dedicated trigger input, individual output, and FX send and return with 6.3mm jack sockets, along with extensive MIDI implementation. All voices are summed and run through a built-in compressor.

Time to ride the skies!

Erica Synths are pleased to see the enjoyment the PERKONS has brought to users worldwide over the past two years! To celebrate its success, they have decided to transform the beast by giving it a new demeanour - a timelessly black finish to match Erica Synths' other instruments and to visually complement the dark aesthetic that has become synonymous with Erica Synths modules and desktop instruments all over the world.

Notes: Part of Sonicware's brilliant Liven series of affordable, creative groove boxes, the Ambient O packs in layers of drone, textures and noise sources to create engrossing soundscapes. Creative, experimental fun.

*** Firmware version 1.5 update- March 2025 ***

Temperament Settings for Each Track

In addition to the standard 12-tone equal temperament, you can now set 7 different temperaments per pattern, including Pure intonation, Pythagorean tuning, and Solfeggio frequencies.

64 Sound Pattern Palettes

Featuring 32 newly added sounds & patterns, along with 16 Sound Healing Vibes sounds.

Relaxation Playback Mode

Arrange your favourite patterns, set repeats and fade-outs, then let it gently fill your space with ambient sound. (Seamless pattern changes improved: if sound settings remain the same, transitions will now be smooth without audio interruptions.)

Master Tune Now Adjustable in Hz?Master tuning, previously adjustable in cents, can now also be set in Hz increments (410 - 470 Hz).

Line In Selectable on NOISE Layer

The NOISE layer can now be selected to Line In, allowing the application of Filter, LFOs, and other track-level controls to the input signal.

New LFO Waveforms & Assignment

Added three slow LFO waveforms (L.SIN, L.TRI, L.S.RN). Additionally, oscillator level can now be assigned as an LFO destination.

Pitch Bend Range Setting

You can now configure the pitch bend range in the system settings.

Changes in Oscillator Usage

Due to specification changes, the NOISE layer now consumes only one oscillator, while the ATMO 2 structure now consumes three oscillators.

Bug Fixes & Improvements

Fixed MIDI CC issues and addressed other minor bugs.


Supplier's Notes:
Your Personal Soundscape:

Conversations between Oscillating Tones and Your Mind

Immersive Ambient Generator

4 layers of tone and texture-Drone, Pad, Atmos, and Noise-merge to generate deep resonance and continuous transformation.

Ambient O (zero) is incredibly easy to use. Start by playing a tone from one layer using the note hold function. While listening closely, simply tweak the knobs to modify the tone and add other layers to shape a pleasing sound.

Blendwave Modulation Synthesis

Sonicware conducted extensive research into creating undulating and fluctuating tones for Ambient O, resulting in the development of a new wavetable-based synthesis.

Blendwave Modulation Synthesis combines 6 unique structures with 32 WAVEs featuring complex harmonic transitions, making it easy to create powerful low drones, lush pads, and transparent pizzicatos, perfect for Ambient Music.

4 knobs/8 parameters offer a wide range of tone creation.

A WAVE contains 128 harmonic tables, allowing for diverse tonal changes such as moving from basic waveforms to complex harmonics. The WAVE is represented by a yin-yang icon, with the yin representing moves in the reverse direction through the tables during modulation.

6 Structures - Each structure has a different number of oscillators and modulation circuits. ATMOS 1 applies ring modulation, while ATMOS 2 applies FM modulation.

Noise and Space

The Noise layer includes 8 specially selected nature sounds, offering noise blending, pitch adjustment and modulation to infuse unique spatial characteristics.

Additionally, it allows for up to 8 seconds of stereo sampling from the line input, letting you create personalized textures.

Extensive Effects Section

Ambient O is equipped with 9 types of lush reverb, each offering unique spatial dimensions and brightness settings. You can individually adjust the reverb send and shimmer send (for layering octaves) for each layer.

In addition to the reverb, the Ambient O offers an effect unit with Tape Delay, Reverse Delay, and 4 master effects; Overdrive, Bit/Rate Crush, Tilt EQ, and Stereo Chorus.

Sequence up to 64 steps per pattern.
Random playback of sequence phrases.
Probability of notes sounding can be set from 25 - 100%.
Program notes step by step or record them in real time. Additionally, you can also input notes to specific steps while the sequencer is playing to add variation.
Overwrite notes in real-time with one touch while playing back sequence phrases.
The Parameter Lock function allows you to record knob changes into your patterns. This can be recorded live, or programmed in step by step.

Specifications

[Synthesiser]

- Note Hold function
- 128 Sound Pattern Palettes (incl. 16 types of preset palettes)
- Mixing including level/pan for each layer
- Layer (Sound) copy and paste function
- Tune All function changes the pitch of all layers (i1 octave in 20-cent steps, adjustable in 1-cent step)
- Standard polyphony: 10 voices (depending the structure's oscillators x simultaneous voices)

4 Layer Construction
Drone, Pad, Atmos Layers
- New Blendwave Modulation Synthesis for creating undulating and fluctuating tones
- 6 Structures, 32 Waves
Drone 1: 2 oscillators, modulates Detune
Drone 2: 2 oscillators, modulates Harmonics
Pad 1: 3 oscillators, modulates Harmonics
Pad 2: 3 oscillators, modulates Harmonics
Atmos 1: 1 oscillator, ring modulation on output
Atmos 2: 2 oscillators (frequency modulation), modulates Pitch

- Polyphonic mode
- Mono mode (adjustable glide time)
- Legato mode (adjustable glide time)
- Unison mode (adjustable detune)
- Arpeggiator modes (Up, Down, UpDown, DownUp, Up&Down, Down&Up, Up+1, Up+2, Down-1, Down-2, Random, Play Order)

Noise Layer
- 1 Structure, 8 Waves
Noise: 1 oscillator, modulates Pitch
- Loop or One-shot playback, White noise mixing
- 16bit - 32kHz Linear PCM sampling (stereo)
- Up to 8 seconds of sampling per sample (crossfade settings from 1 to 4 seconds)
- Auto start sampling function with the input level (input level can be set)
- Import and export of a slot of samples (via MIDI)
*Import of audio files from PC/Mac is not supported.

- Polyphonic mode
- Mono mode (adjustable glide time)
- Legato mode (adjustable glide time)
- Arpeggiator modes (Up, Down, UpDown, DownUp, Up&Down, Down&Up, Up+1, Up+2, Down-1, Down-2, Random, Play Order)
Each layer has its own envelope, filter and 2LFOs.

- Attack
- Release

- Low Pass Filter
- High Pass Filter
- Band Pass Filter

- 2 LFOs assignable to various parameters (individually adjustable)
- Adjustable LFO Shapes and trigger count

[Effects]
9 types of high-quality reverb (Send amount to reverb and shimmer adjustable per layer)
- Small.L
- Small.M
- Small.H
- Large.L
- Large.M
- Large.H
- Infinity.L
- Infinity.M
- Infinity.H
6 types of diverse master effects
- Tape Delay
- Reverse Delay
- Overdrive
- Bit/Rate Crush
- Tilt EQ
- Stereo Chorus
The above reverb and master effects can also be applied to external sources from the LINE IN.

[Sequencer]
- 4 tracks (1 track on each layer)
- Up to 64 steps per pattern
- Step length can be set from 1/1 to 1/32 or 2/1(Breve) to 8/1(Maxima)
- Real-time recording
- Overwrite REC function for real-time sequence replacement
- Directly enter notes for each step when playback is on or off
- Enter longer notes (Tied notes)
- Metronome and pre-count function
- Step copy and paste function
- Track copy and paste function
- Duplicate to extend a sequence
- Transpose function
- Pattern BPM / Global BPM can be set
- Pattern chain function (Loop playback possible)
- Track level and pan can be set independently
- Parameter Lock function to record parameter settings for each step
- Sound Lock function to record sound settings for each step
- Note playback probability can be set from 25 to 100% for each step
- RANDOM function to play back steps in random order

[MIDI]
- Notes, control changes, clock input/output
- Import and export user data
- Firmware update via Sysex

[Unit]

27 keys (with a hold function)


- 15 physical control knobs
- Optional LATCH function prevents jumps in value when knob position and parameter values do not match.
- One physical encoder for fine adjustments.
- LCD dot indicates when a parameter value matches the saved value, or when the value has been changed.

Notes: Your Teenage Engineering OP-1 or OP-XY is more than just a synth - it's an essential part of your creative process. Whether sculpting sounds, remixing beats, or pushing the boundaries of music-making, your OP deserves the best protection. That's where our Decksaver cover comes in.

Designed with the ultimate precision, this custom-molded polycarbonate cover fits seamlessly over your device, safeguarding it from dust, spills, and accidental knocks. Its ultra-durable yet lightweight design keeps your controller protected without adding bulk, making it ideal for both studio setups and on-the-go musicians.

With a Decksaver cover in place, buttons, knobs, and surfaces stays pristine, allowing you to focus on your craft without the worry of everyday wear and tear. The smoked transparent, low-profile design ensures your OP-XY retains its sleek aesthetics while remaining fully accessible when inspiration strikes.

Slip it into your backpack, gig bag and travel with confidence knowing your OP is safe from unexpected mishaps. Whether you're performing live, producing in the studio, or jamming at home, the Decksaver cover is the ultimate armor for your creativity.

Keep your OP protected. Keep your creativity flowing.

Notes: High quality audio leads for exceptional sound quality and reliability. High grade cable comprises an insulated pure copper core and global shielding.

The durable PVC sheath has a soft texture and is reinforced with cotton cord to avoid tangling. Terminated at one end with a 6.3mm stereo (TRS) jack plug and at the other end with a male XLR connector.

Notes: Balanced microphone/audio lead terminated at one end with an XLR socket and at the other end with an XLR plug.

Notes: ALM Busy Circuits' Din-Sync Adapter cable lets users route "clock" and "run" Din-Sync signals via two 3.5mm mono jacks. It's a great way to sync one's Eurorack modular sequencer with external drum machines, synthesizers, and more.

Notes: Excellent value from Arturia's hugely popular mini controller. 25-key design with pads, faders, rotary pots and transport controls for full hands-on playability of software synths and DAW features.

Supplier notes:
MiniLAB 3 is a compact MIDI keyboard & pad controller that lets users make music, right out the box. With a creative plug-and-play workflow, versatile assignable controls, 500 curated sounds from Analog Lab's massive library, and a bundle of world-class creative software, MiniLAB 3 is designed to finally help beginners and professionals to get truly immersed in their music creation flow, whatever their style.

Hands-on, easy to use

From the great-feeling keyboard to the smart DAW-integrated pads & faders, to the real-time mini display, every aspect of MiniLAB 3 is designed to be intuitive, expressive, and a joy to use - for beginners and pros alike.

Creative features

Enjoy a workflow that aids the creative process, with features like a built-in arpeggiator, Chord mode, custom DAW presets, and easy transposition. Making music has never been so accessible.

Portable, compatible design

MiniLAB 3 is built to fit seamlessly into any setup, from bedroom to stage, with its compact & lightweight design, deeper DAW integration, and MIDI out & USB-C connectivity.

Eco-Designed

MiniLAB 3 is built with longevity and sustainability in mind. A rugged road-ready design, 5-year warranty, minimum 50% recycled plastic construction, and 100% recycled packaging means this controller goes the distance.

Creative software included

On top of a world-class MIDI controller, users get a full package of premium music-making software, from an industry-standard DAW to well over 500 synth & keyboard presets.

Production-ready bundle

Everything that users need to start creating their own music. Explore premium tools like Ableton Live Lite, Analog Lab Intro, UVI Model D grand piano, and Native Instruments "The Gentleman upright piano; enjoy access to millions of royalty-free lifetime loops & samples with a Loopcloud 2 months subscription + 1 Welcome pack + 1 pack of your choice; get to grips with playing keyboard, finger drumming, DAW production, and even music theory with a Melodics "unlimited" trial subscription & bonus lessons.

What's fun to play with

MIDI Control Center

Use the Midi Control Center to customize your MiniLAB. You can change the Velocity curves (keyboard and pads), the Knobs acceleration, the Pedal input type and polarity, the Message types with their Min and Max values, the MIDI Channels, and much more. Shape the MiniLAB exactly the way you need it to be.

Switch MIDI Channel - Shift + a key with a number above it will change the MIDI Channel.

Hold a note - When engaged, every note played will be held. Playing new notes will replace the previously held notes.

Chord mode- Shift + Hold will activate "Chord mode". Then, just play one note and it will play the full chord with the pressed note as the root note. You can record a custom chord by keeping Shift + Hold pressed while entering up to 16 notes.

Transposition - Transpose the whole keyboard by octaves or semitones by pressing Oct or Shift + Oct.

Transport Control - While pressing Shift, you can use the corresponding pads to Play, Stop, Record, Loop, and tap the tempo.

Arpeggiator mode - Shift + Pad#1 engages/disengages the Arp. Long press Shift + Pad#1 to enter the Arp settings. Then use the 8 knobs or the main encoder to set the Arp as you please.

Hold + Chord + Arp - Can be activated at the same time, allowing you to keep the Arp running while tweaking the parameters of a preset.

Pad banks - Shift + Pad#2 toggles between Bank A and B).

Programs - Shift + Pad#3 cycle through the programs. Arturia and DAW programs will automatically connect to any Arturia Software or DAW if there is one open on the computer. You can create and add some User Programs to customize the MIDI CCs, notes, pad colours etc.

Arturia Program - use the main encoder to browse through presets. Press the Main encoder to select a Preset. Long Press the main encoder to like/unlike the Preset. Shift + Main encoder will browse through Types. Select one, and then browse through the filtered presets.

DAW Program - use the main encoder (turn or click), and "Shift + the main encoder" (Shift + Turn and Shift + Click) to access different features depending on the connected DAW.

Back Panel connectivity
USB-C = Connect to a computer or a power source
Control Input = you can set the pedal input to be Sustain, Expression or Footswitch.
MIDI Out = Send midi through MIDI Din port

Notes: Developed in conjunction with Dutch software dons 112dB, the Echolocator brings precise, ultra-controllable delay to the hardware realm. Full stereo design with filter and shimmer modes, freeze function and foot switch input.

Supplier's Notes:
The Echolocator is a hands-on precision tool that lets you take manual and very musical control over small nuances. Like a bat navigating its environment in the dark, you can feel your way through your live performances and shape the delay response and character on the fly. Featuring 12 parameters for detailed sound design, save/recall functions for all parameters, MIDI control over all parameters and a sleek aluminium case to match our lineup of compact desktop units, the Echolocator will let your setup take flight in any live show, studio or sonic experiment.

Notes: The TipTop Audio Stackcables allow you to stack your cables to give you complex signal flows with greater visibility

Notes: The TipTop Audio Stackcables allow you to stack your cables to give you complex signal flows with greater visibility

Notes: These rack screws for Eurorack can be screwed by hand for quick changes, or use a standard Phillips head screw driver.

Each Standard Size M3 X 8mm black steel screw comes with a black nylon washer in a gold tin.