Today Only: All genres sale vinyl

Notes: Wow. Oscillators don't come much more special than this. Two contrasting, fully independent VCOs with waveshaping and complex cross-modulations, plus the 'Thru Zero Trinity' of FM, phase and amplitude modulation. Beautiful.

Supplier's Notes:
Thru Zero Complex Oscillator

A new complex oscillator, featuring two independent VCO's. Both voices have a unique signal path and flavour. Complex cross modulations entangle them together, opening up completely new timbral territories.

Features include the Thru Zero trinity; Frequency, Phase and Amplitude modulation.

Each oscillator also has its own Low Pass Filter, which works great to mellow the harsher tones from complex intermodulations.

Each VCO has great tracking and temperature stability, there is no distinction between a carrier and modulator.

The FM bus lets you modulate the index of each individual voice, with linear and exponential inputs for external sources. There are also inputs for Sync in, with both soft and hard sync.

VCO 1

The left VCO signal chain starts with a shape function, that let's you morph between triangle and saw. This waveform is also available as a separate output.

Next is a sinusoidal wavefolder, which changes its response dramaticaly based on shape of the waveform. The circuit is based on a modified version of a design by Barrie Gilbert from 1977, popularized by Open-Music-Labs (used with permission).

This circuit also creates the possibility of Thru Zero Phase Modulation, here the depth is controlled with the third slider. The source is normaled to VCO 2, but external modulation sources can be patched in, and the depth can also be modulated with CV.

Lastly there's a 2-pole Low Pass Filter, before going out the MAIN output. All parameters can be CV controlled, and feature handy attenuators at the inputs.

VCO 2

The first slider is a continuous waveform shaper, that morphs from sine to tri to saw.

This waveform then enters the Thru Zero Amplitude Modulation (Ringmod) section. The slider sets the depth of modulation, with the source normalized to VCO 1. The depth can be CV controlled, and an external source can be patched as well. The result is also available on a separate output, pre wavefolder/filter (VCO 2 sine).

The third slider is a wavefolder, it's based around a novel wavefolding topology, with a unique and more aggressive sound compared to the sinusoidal folder of VCO 1.

The wavefolded signal goes into a 2 pole Low Pass Filter, and out of the MAIN output.

Dimensions
26 HP
27 mm deep

Current Draw
190 mA +12V
190 mA -12V
0 mA 5V

Notes: *** This version of UTILITIES comes with PULSAR-23 style turrets designed for connecting alligator clips. ***

UTILITIES contains a set of simple auxiliary modules to expand the functionality of the PULSAR-23 drum machine. UTILITIES modules can also be used with any gear that works with CV signals (Eurorack, semi-modular synthesizers, etc.).

The modules included in UTILITIES can be divided into two groups:
1) Passive elements such as switches, resistors, capacitors.
2) Various types of amplifiers and waveshapers, linear, non-linear, controlled and uncontrolled.
Passive elements are designed to expand the possibilities of switching and controlling the PULSAR.

Linear amplifiers are needed when you need to feed a signal from a device operating in a lower voltage format to the PULSAR inputs. For example, it can be a step sequencer with an output voltage of 5 volts, while the PULSAR needs 10 volts to fully trigger the drum modules. Or it could be the output of a cassette tape recorder, which has an output of 1 volt, while for normal operation the PULSAR needs an input level of an audio signal of 5 volts. Non-linear and controlled amplifiers and waveshapers are designed to control the signal level, while simultaneously changing its spectrum, distorting its shape and adding harmonics. The circuitry of these amplifiers is very simple and based on the early developments of the transistor era, with its inherent beauty and grace.

UTILITIES connectors are made in the PULSAR-23 format on pins designed to connect the alligator clips. There are also adapters for 3.5mm Eurorack mini-jacks.

The top panel and enclosure of UTILITIES are made of PCBs, which significantly reduced the cost of the device.

There are also adapters for 3.5mm Eurorack mini-jacks. The top panel and enclosure of UTILITIES are made of PCBs, which significantly reduced the cost of the device.

The top panel and enclosure of UTILITIES are made of PCBs, which significantly reduced the cost of the device.

Power supply: DC +12 v 5.5 x 2.1 mm center plus
Current consumption: 50 ma max
Dimensions: 288 x 193 x 40 mm
Weight: 0.75 kg

Notes: Simple, powerful and high-quality voice recording solution, ideal for interviews, videography and podcasting. Clip on the lavalier microphone and record directly into the tiny battery-powered unit in high-quality 32-bit float resolution.

Supplier's Notes:
Small Appearance, Big Impact.

Videographers love the Tascam DR-10L Pro portable recorder with clip-on microphone as an easy and unobtrusive solution for capturing audio for video. Combining the clip-on convenience of a lavalier microphone with an ultra-compact portable recorder, this form factor solves many of the problems content creators often face. It's a superior solution for busy events such as weddings and on-location film shoots.

While traditional wireless microphone systems can pose workflow concerns, the rock-solid performance of a Tascam wired lavalier recorder is proven and assured. Simple plug-and-go operation also makes the DR-10L Pro an easy backup system for your typical voice recording setup.

The DR-10L Pro's 32-bit float recording technology lets you capture a whisper, a scream and everything in between with impeccable fidelity, ultra-low noise and no need to fine-tune gain levels. Support for wireless timecode sync with Atomos products, the ability to wirelessly control up to five recorders from the app*, plus long battery life and generous storage capacity make the DR-10L Pro ideal for professional applications.

*optional AK-BT1 required for app control and wireless timecode sync

Ultra-compact and lightweight, the DR-10L Pro is the perfect solution when stealth is a priority. Fitting in the palm of your hand and weighing just 65 grams, this recorder is easy to hide at film shoots, weddings, stage performances, and other projects where invisibility is crucial.

The included belt clip attaches easily and securely to clothing, allowing you to capture great audio without compromising your talent.

Using the DR-10L Pro's standard 32-bit float recording mode, two analogue-to-digital converters (ADCs) capture sound over an enormous dynamic range without distortion or excessive noise. This means that videographers can avoid having to discard recordings due to poor levels. With 32-bit float resolution, there's no need to adjust input gain levels, so you can set up faster and be confident that you're recording excellent audio in every situation.

The included TM-10L microphone captures clear, detailed audio while handling high sound pressure levels without distortion, making it the perfect lav mic for 32-bit float recording with the the DR-10L Pro.

Whether you're recording people at a wedding reception, a busy convention or a lengthy ceremony, the DR-10L Pro is ready for service as long as you are. There's no need to worry about changing batteries during recording: the DR-10L Pro personal recorder runs on just two AAA batteries for up to 24.5 hours*.

In addition, files are saved on the microSD card approximately every 20 seconds during recording to minimise the risk of data loss due to unexpected power cuts.

*Lithium batteries

With the optional AK-BT1 Bluetooth dongle, up to five DR-10L Pro recorders can be controlled wirelessly from iOS, iPadOS and Android devices using the free DR-10L Pro CONNECT app. The app allows videographers to check device status*, view the recorded waveforms in real time and create up to five presets. A preset can be applied to a single recorder or to all controlled units at once. You can also use the app to name devices for easy identification, for example "Bride", "Groom", and so on.

With the optional AK-BT1 Bluetooth dongle, the DR-10L Pro is ready to wirelessly synchronise timecode with supported Atomos products. Timecode allows videographers to perfectly align audio with video, even when there is no audio on the camera.

Timecode is critical for videographers when dealing with multi-camera video shoots, saving valuable time in post-production.

*Audio monitoring via app is not supported

Whether you're in a dark environment or outdoors in the sun, the DR-10L Pro's highly visible OLED display lets you confirm settings at a glance.

You can check your battery level, recording status, and input levels directly from the display, and all advanced functions are just a few button presses away.

The DR-10L Pro lavalier recorder has a headphones output for easy monitoring. You can listen to the input before or during recording, and also check the quality of your recordings immediately without having to first transfer them to a computer.

The DR-10L Pro comes bundled with a free version of RX Elements, a groundbreaking audio repair and noise reduction tool from iZotope. RX Elements gives videographers powerful audio restoration capabilities that need to be heard to be believed, from seamlessly removing coughs and background noise to reducing wind roar and ambient noise. Live video shoots for weddings, on-location interviews, and documentaries can present countless post-production challenges, and RX Elements gives videographers the tools they need to overcome them.

Specifications

Storage media and file formats

Recording media: microSD card (64 MB - 2 GB), microSDHC card (4-32 GB), microSDXC card (64-512 GB)

Recording and playback formats:
WAV: mono/poly (BWF format), 44.1/48 kHz, 16-bit, 24-bit, 32-bit float
MP3: 44.1/48 kHz, 128/192 kbit/s (recording) 32-320 kbit/s (playback)

Analogue audio inputs and outputs
Microphone input: 3.5-mm mini TRS jack (with screw lock)
Maximum input level: -11 dBu
Gain range: 7.5-38 dB
Input impedance: +/-2 kO
Included microphone: TM-10L
Sensitivity: -42 dBV/Pa
Maximum sound pressure level: 115 dB SPL
Supply voltage: 2.3 V
Analogue output (Headphones jack): 3.5-mm mini stereo jack (dual mono audio output)
Maximum output power: 10 mW + 10 mW (THD =0.1 %, 32 O)

Audio performance
Frequency response (input to recorded data): 20 Hz - 20 kHz, +0/-1 dB
Distortion: 0.01 % (1 kHz, input level -21 dBV)
Dynamic range: +/-105 dB

Power supply and other specifications

Power supply
2 AAA batteries (alkaline, NiMH or lithium rechargeable, sold separately)
USB bus power from a computer

Power consumption (batteries): 0.3 W (maximum)
Current consumption (USB bus power): 0.1 A (maximum)
Dimensions (W × H × D): 53 mm × 51 mm × 21 mm (excluding protrusions)
Weight@ 65 g (with batteries), 43 g (without batteries)
Permissible operating temperature range: 0-40 -C

Battery operation time
Conditions: WAV recording at 48 kHz, 32-bit float, mic connected, headphones not connected, limiter off, mono file, continuous operation, in hours:minutes (JEITA CP-2905)
Alkaline battery (Evolta)
16:30: No Bluetooth connection
16:00: Bluetooth connection

NiMH battery (Eneloop)
11:30: No Bluetooth connection
10:30: Bluetooth connection

Lithium battery (Energizer Ultimate Lithium)

24:30: No Bluetooth connection
23:00: Bluetooth connection

Note: Operation times may vary depending on the recording media being used. Reduced battery life when using headphones.

Review: High-kicking, nunchaking, pizza-eating, wise-cracking green dudes incoming. The barnstorming success of Teenage Mutant Ninja Turtles: Shredder's Revenge isn't hard to surmise. The original cartoon itself is a joyous, goofy, good time slice of late 80s / early 90s pop culture, and the modern video game knew exactly how to capture that energy and port it into a highly addictive beat 'em up. The soundtrack is pitched bang on for the occasion as well, running the gamut from electro and funk to jazz, all rendered with that classic chip tune finish. But that's not all - the team also invited a dizzying cast of guests to lend their voices to this project, from Raekwon and Ghostface Killah to Mike Patton and more. To put it another way, it's totally far out.

Review: Any new album from deep house pioneer and all-round legend Larry Heard is good news, but especially so when it's credited to his best-known and best-loved alias, Mr Fingers. Around The Sun Pt 1 is Heard's first album under the alias for four years and, unsurprisingly, it's as musically expansive, evocative, and atmospheric as they come. Naturally, it's rooted in the warming, dreamy, subtly jazz-flecked deep house style he's been tweaking and improving over decades, with occasional forays into sun-kissed downtempo grooves ('Touch The Sky'), angular acid tracks, Heard's take on dub house (the deliciously deep, micro-house influenced 'Marrakesh') and summery Balearic house ('Shimmer'). All in all, it's another masterpiece from deep house's most significant pioneer.

Notes: The Glorious Vinyl Frame Set lets you display your vinyl cover artfully in any setting. The set consists of three vinyl frames and is suitable for all 7'' record covers. A vinyl cover is often more than just a sleeve for your record - many of them are designed with stunning artworks or were individually signed by artists. To avoid your favourite record covers collecting dust in record boxes, we have developed a suitable frame for them. The sturdy construction with glass cover is designed for 7'' covers and is captivating due to its minimal and stylish design, which is available in three colour finishes. The vinyl frame can either be hung on the wall or placed on even surfaces, thanks to the hinged stand. Display your favourite records in style.

Review: This is the sort of album that we record nerds always fall for. The title alone is exciting - who wouldn't want to take a Sonic Expedition into the Peruvian Amazon between 1972-1986? It is a classy collection that brings together vintage cumbia sounds and all its many famously lopsided rhythms and scratch sounds. The tunes come from all over the place but most notably the shores of the Amazon where hundreds of tiny villages all fomented their own subtly different takes on the tried and tested template. This is a rather modern take on cambia too with electric guitars, squeaky Farfisa organs and proto-synths all making the sounds instead of early styles with a big band feel and plenty of accordions.

Review: A shining example of soundtrack reggae, 'Sally's Song' was first incarnated in an unlikely spectacle: Tim Burton's A Nightmare Before Christmas. Originally composed by the film's scorer Danny Elfman, reggae reinterpreters Aanant Pradhan and Larry McDonald (of Skatalites fame) here lay down a dour dub cover version. Wistful, moody and clean. The B-side, meanwhile, shows off the pair's knowledge of film music even further - Henry Mancini's 'It Had Better Be Tonight' from the 1963 version of The Pink Panther makes similar waves as a kettle-drum heavy dub version.

Review: This mini album from Saul, a collaboration-loving duo comprised of Jack Stephenson-Oliver (keys player with Vels Trio) and producer Barney Whittaker AKA Footshooter, could well be one of the most summery-sounding releases of 2022. A gorgeously warm, dreamy and tactile affair that effortlessly joins the dots between classy dancefloor dynamics, laidback electronics, freewheeling jazz musicianship and soulful vocal flavours, it's a genuinely brilliant and highly entertaining affair. Our picks of an extremely strong bunch include the broken beat/electro-boogie fusion of 'Coalesce (featuring Natty Wylah)', the gently two-step influenced deep house soul of Allysha Joy hook-up 'The Light' and the Balearic ambient meets post-dubstep bass music flex of 'Lifted'.

Notes: Reco-Clean, a cleaner developed by Disk Union exclusively for professional use for vinyl records, is highly effective in reducing noise caused by dirt in the sound grooves.

It is designed to balance cleaning power and sound quality to avoid adverse effects on sound quality.

Normally, Reco-Clean alone is effective enough, but Diskunion have developed a special additive (cleaning booster) as a countermeasure for stubborn stains that cannot be removed easily.

How to use

1. Apply a small drop of Reco-Clean PLUS to the required area.
2. Wipe off with a Reco-Cloth, pressing it lightly against the surface of the record as if polishing it.
3. Clean the entire surface again with regular Reco-Clean.
4. Wipe off completely with the Reco-Cloth.

*Always re-clean (rinse) with regular Reco-Clean after use.

Review: XYZ come through with another crucial reissue of a much love Italo classic that is high in drama and packed with 80s charm. It came first in 1987 and represents the biggest tune Roy ever put out - not hard to see why when you hear it withe r- the big camp vocal, the cold and snappy drum machines sounds and dazzling synth arps all elevate mind and body. This version comes with, as ever, a Flemming Dalum that adds some extra melodic brightness, and a DJ TinTin remix that smooths things out and adds some extra warming reverb.

Review: Nine years after volume one landed in stores, Italian twosome G&D return with a fifth instalment in their occasional edit series. This time they've got company, too. Fellow Italian producer LTJ contributes a brilliant EP-opening edit - the languid, disco-meets-jazz-funk shuffle of 'The Rain Machine', where elastic bass and electric piano solos catch the ear - while Star Creature signees First Touch provide a smoother, chunkier and more synth-heavy rework of the very same track on side B. G&D fill in the gaps, first tweaking a sweaty disco-funk jam ('Ziddy'), before reworking a surging, techno-tempo disco stomper (the wonderfully camp 'Gusto').

Review: Second chapter of the Imago Series on Black Chrysalis Archives. All tracks come from the original version of the album Prometeo, written and produced by Tullia Benedicta and released by BCA Embryo Series in November 2018.

Review: 'Infinite Branches' explores multi-textural sound illustrations that encompass an array of calm tones and gentle movements. The ep features four beautiful arrangements by the artist with eight reworked vignettes- where two branches of the theme share a certain commonality, but never intersect. Infinite Branches is a compelling and inspirational paean to various forms and patterns of the ambient genre which include reworks by: 36, zake, Pausal, City of Dawn, Ai Yamamoto, awakened souls, Patricia Wolf, and Christina Giannone.

Review: This great release on Dublin's Research imprint was originally released last year on digital, but receives a much deserved vinyl pressing here. It is a double header from two uncompromising artists on the techno scene; on the A side we have local producer Dean Mylar with the body bashing warehouse rave frenzy that is 'Different Youth' which definitely has you sorted for peak time tackle. Over on the slip, the Code Is Law-affiliated Under Black Helmet takes over for a remix and you surely know what to expect on this one: pitch black and austere Berlin-style fury all the way, and not for the faint of heart!