搜索结果

Notes: Erica Synths Acidbox III brings you the core of the famous Polivoks VCF in stereo version with a unique audio signal overdrive circuit, built in LFO and envelope follower in a compact, full aluminium case.

The Acidbox III has adjustable input gain, therefore it works with various sound sources - guitars, units with line level signals (synthesizers, grooveboxes, etc.) and modular synths. Configurable control input allows you to connect a bypass footswitch, expression pedal, external cut-off control voltage source and LFO synchronization trigger. This makes the Acidbox an ideal companion in almost every production or live performance setup.

Notes: The next generation 12 stage, analogue multi tap Phaser, which is a development of, and replacement for, our earlier MegaPhase 12 unit. It includes all the features of the MegaPhase 12 and is also built around the circuitry of the superb sounding EH Smallstone Phaser, which was used to such great effect on synthesisers and string machines by J M Jarre on his early albums. It has the same versatile Stage and Emphasis stage switching, and the same configuration of stereo outputs, where the left channel is taken from the Stage switch, and the Right output from the Emphasis Stage Switch.

New features include independent Level Controls for Input 1 and Input 2, and a Phase "Colour" Control, which can lighten or darken the phasing effect. We have also used much lower noise internal VCA's and low noise audio op-amps along with a four layer PCB design, so that the S/N ratio is improved and the noise floor is considerably reduced compared with the previous MegaPhase 12 phaser. Like its predecessor it occupies 18HP of Eurorack space.

Notes: Mimetic Digitalis is a 10HP step sequencer optimized for live use. MD includes four individually editable CV outputs and a trigger out. Each step can be manually programmed or use MD to live record CV sequences using the encoder. The zero button mutes the CV at a step and shred randomizes the voltage. Save and load up to 16 patterns. Edit a pattern and use undo to return to the unedited version.

Notes: The Stereo Triggered Sampler can record high quality stereo files, while simultaneously playing two different stereo files. A maximum of 600 samples can be loaded from the removable/swappable microSD card, in a variety of formats up to 96kHz/32-bit/stereo WAV. All sample parameters (1V/oct pitch, sample file selection, length, and start position) are CV controllable.

600 Samples:
A maximum of 600 samples can be loaded at once, arranged into banks of 10 samples each. Samples and banks can be re-arranged on the fly using the simple on-board Edit features. Newly recorded samples can be instantly played back and re-pitched, reversed, chopped up, etc... the result of which can even be bounced down and re-recorded to as a new sample! Sample files are limited to 4GB each, which is over 6 hours at 44k/16b/stereo.

Two Stereo Playback Channels:
Each playback channel has a knob and CV jack for Sample File selection, as well as a Start Position knob and CV jack for controlling where in the sample playback will begin. The Length knob and CV jack determine how much of the sample is played back: from tiny grains, to percussive hits, to longer loops... or just the entire file. These are powerful tools for re-arranging a sample, joining multiple samples, and creating dynamically re-sized loops within a larger sample. Combined with the Play Trigger jack and the 1V/oct jack, the STS can be two complete multi-timbral pitch-tracked stereo voices!
There's also a Reverse button and jack for backwards playback, and an End Out jack for synchronizing loops, or cascading sample playback with other events.

Looping and Sync:
Looping is easy: just hold the PLAY button down for two seconds to toggle loop or one-shot. The loop timing clock will output from the End Out jack. Or, send a clock into the Play Trig jack to sync the loop to external timing.

Stereo Recording:
Whether you patched 47 modules to create the ultimate percussive blast, or you want to capture your four hour ambient performance, recording high-quality .wav files on the STS is simple. Just hit the REC button or fire a trigger and a new stereo .wav file will be created on the SD card. Do as many takes as you need: the STS never deletes your files. Re-ordering or re-arranging samples into banks is easy, even without a computer.
You can even fill a bank with 10 different variations and immediately use them for playback.
By default the STS records at 44.1kHz/16-bit, with an option for 24-bit (a future update may increase the sample rate to 96kHz)

Easy sample loading:
Using a computer is completely optional with the STS, since samples can be recorded directly to the module and placed into the bank of your choosing. But for users with large existing sample banks, the intuitive automatic bank loading features make dragging and dropping your entire sample library a snap. You never have to rename your files again!

Notes: Killer physical modelling module collab from two of the biggest names in their respective fields of hardware and software. Generates a huge range of percussion instruments plus synths and bass tones.

Supplier's notes:
Plonk uses a technique known as physical modelling to synthesize, with great realism, the way in which sound is produced by acoustic instruments. The Plonk module is, itself, focused primarily on creating percussive sounds - both pitched and un-pitched; natural and unnatural; acoustic-sounding or totally electronic.

Plonk does this by breaking sound creation into two distinct elements - the exciter and the resonator. The exciter is a mathematical model of the device used to strike a particular surface. Plonk, because it's percussion oriented, has two types of exciters: one modelled on a mallet, and the other providing a noise source. The resonator is a virtualization of the object being struck, which vibrates, resonates and creates the body of a sound. Plonk offers several types of resonators: beam; marimba; drumhead; membrane; plate; and string.

Plonk provides numerous parameters that let you shape, mould and design both the exciter and the resonator, thus enabling you to synthesize the sound of striking or scraping almost any type of object - real or imagined. In this way, Plonk can accurately model the sounds of kicks, snares, toms, cymbals, claps, tablas, congas and all manner of traditional percussion instruments. It can also model pitched percussive instruments, like vibes, marimbas, and even bass or guitar-like tones. Of course, it additionally excels at modelling instruments that heretofore never existed.

Best of all, the sounds created by Plonk are not static - any sound you design can respond dynamically to velocity, as well as four different modulation inputs. This means the sound of Plonk can change completely from note-to-note (or strike-to-strike). Because of this, Plonk is actually a duophonic (2-voice) module, which lets the sound of one note decay naturally when a second note (possibly employing an entirely different set of modelling values) is struck. Thus, hitting a new note does not choke the sound of the previously struck note (unless you want it to, of course)!

Plonk stores up to 128 patches in its internal memory, and ships with many presets programmed by professional sound designers and composers. You may overwrite these patches if you wish, and banks of patches may be transferred via MIDI System Exclusive over Plonk's built-in mini-USB port to facilitate offline storage by programs or websites that support this capability.

Plonk was developed in cooperation with Montreal-based Applied Acoustics Systems - physical modelling pioneers, and the creators of Tassman, Lounge Lizard, String Studio, Ultra Analog, Chromaphone and numerous other plugins. It is with great pleasure that Intellijel brings the potential of this physical modelling technology to a hands-on, CV-laden device capable of the sort of dynamic control and sonic exploration that modular synthesists demand.

Notes: Killer value for money here. Korg's budget synth brings proper analogue polyphony to a crazy price point. Amazingly versatile with sound to match synths two or three times the price.

Supplier's notes:
Meet minilogue; the stylish, innovative, 37 slim-key fully programmable analog polyphonic synthesizer:
minilogue's newly developed analog synthesizer circuit delivers polyphony and full programmability at a great price --- exactly what today's musician needs. With the minilogue, you can get your hands on the powerful sound that's only possible with real analog, and find inspiration with features including a polyphonic step and motion sequencer, on board tape-style delay, multiple sound shaping and filter options, and an oscilloscope display. All of these seamlessly integrated features make minilogue as fun and easy to use as it is powerful. It's the next-generation analog synthesizer for musicians of all types.

True analog sound:
The synth circuits for minilogue are all new ground up designs, delivering a synthesizer experience like no other. Unprecedented in this class, it's a four-voice polyphonic true-analog synth with an interface that's designed for accessibility. Whether you're performing live or producing in the studio, the minilogue is the fastest way for the user to explore and implement real analog synthesis in any situation.
The structure consists of 2VCO, 1VCF, 2EG, 1VCA, and 1LFO. The minilogue's unique wave shape capability lets you fine tune the oscillators' harmonics, creating the most divine sounds and compositions. The minilogue is also equipped with a variety of powerful types of modulation including cross modulation, oscillator sync, and ring modulator, as well as a delay with a high-pass filter. Powerful sound creation and rich variety are the true hallmarks of an analog synthesizer.

Polyphony and Presets - Perfect:
minilogue goes beyond analog synths in its price range by adding 200 preset locations. Select a program for instant access to great sounds - - ranging from thick basses to deep pads to brilliant polyphonic leads and atmospheric sounds. No need to have deep synthesis knowledge; just choose a sound and tweak - a workflow that is very familiar with musicians today. For those who want to dive deeper into the heart and soul of minilogue's engine, the minilogue hold 200 programs; with 100 editable factory programs included, and 100 locations serving as blank canvases on which to create your next analog masterpiece. Each preset can also hold a step sequence and delay settings along with the sounds you create.

Voice modes:
Selectable voice modes let you freely configure the four voices for performance. The voices can be set to four note polyphony for chords or layered for thick basses and leads. Other modes cover a range of sounds from octave shifted bass explosions to delicately staggered layered triggering.

Eight voice modes:
- POLY - operates as a four-voice polyphonic synthesizer
- DUO - operates as a unison two-voice polyphonic synthesizer
- UNISON - operates as an all-unison mono synthesizer
- MONO - operates as a mono synth with sub-oscillator
- CHORD - produces chords
- DELAY - voices 2--4 sound consecutively at a delay following voice 1
- ARP - an arpeggiator operates with up to four voices
- SIDE CHAIN - when a note sounds, the volume of the preceding voice is lowered

16-step sequencer:
Get creative with the intuitive 16-step sequencer with motion sequence recording capabilities, and make your sound truly come to life. The minilogue provides real-time recording with overdubbing, and step recording that lets you record simply by consecutively specifying notes, giving you a great way to create phrases and performances.

Oscilloscope visualizes the sound:
The OLED display will show the waveform as you sculpt your sound. Visual feedback is both educational and entertaining, and represents a first on a hardware synthesizer.

Build quality:
The uniquely curved, sand-blasted 2mm aluminum front panel, metal shaft potentiometers, solid, chassis-mounted metal shaft potentiometers and rubber-coated knobs give the roadworthy minilogue a standout look and feel to complement its powerful and dynamic sound creation capabilities.

Sync with groove machine:
In addition to the standard MIDI connectors, the minilogue provides a sync connector that can be easily connected to Korg's groove machines. Connect this to a volca series unit, an electribe, or the SQ-1, and experience a session with synchronized sequencer playback.

Notes: Immerse yourself and go beyond the boundaries of what is possible with a conventional guitar or synth pedal. GHOST PEDAL brings you new possibilities of tone shaping with its state of the art flexible audio routing chain, allowing you to jump between dimensions with a single press of a button.

From earth shaking subharmonics and distorted drones to angelic shimmer reverbs and anything in between, GHOST is a PEDAL for the adventurous sound designers and the most demanding guitar and synth players. Intuitive UI coupled with hands-on control and preset storage allows you to stay in the now and focus on your performance.

Unique user interface showing parameter values and real-time modulations

Line or high-impedance JFET guitar inputs with cabinet simulator

Full MIDI control over every parameter incl. MIDI clock over LFO and delay

True relay stereo, buffered and trails bypass modes

Bipolar LFO and expression pedal assignments to any parameter

3 reverb and 3 filter types, incl. comb with resonator, six possible routing variations

Reverb freeze, delay looper, spring reverb with virtual spring excite

Three footswitches let you change assignable parameters (tap tempo/freeze/spring excite), select presets and bypass with your feet

Notes: Roucha Legio is a 12 dB /octave state-variable stereo multimode filter available on the Legio DSP+oscillator platform.

Noise Engineering received tons of requests for NE filters over the years, and Roucha Legio is their first dedicated release. The filter features lowpass, bandpass, and highpass settings and tracks frequency via the dedicated encoder and extremely accurate 1v/8va CV input. Roucha Legio's CV-controlled resonance parameter can go from clean to acidy-squelchy for bassline joy. Add CV for filter sweeps that will knock your socks off. Of course, because it's a Noise Engineering module, there's a Fold knob. Add wavefolding to the signal chain before, after, or both before and after the filter.

Noise Engineering have made it easy to carry out dramatic buildups and cuts with Roucha Legio. Just tap the encoder to bypass; tap again to turn the filter on again. Want to automate it? Send a gate into the Bypass input. The filter will remain bypassed as long as a high gate is present.

Roucha Legio is also a DSP and oscillator platform: users can change the firmware on any Legio module, 100% free, to any other firmware in the Legio series.

Dimensions
6 HP
38 mm deep

Current Draw
140 mA +12V
22 mA -12V

Notes: The Morphor Ensemble is an 8-voice fully analogue chorus effect module. The module can truly upgrade any input audio into a sound with body. Transform your creations into warm and full sounds as if a whole orchestra is playing them.

Morphor Ensemble features extensive control over your effect with number of voices selection, CV-able spread, two full-featured LFOs and control over the amount of dry-add signal. This way it is possible to create a wide range of effects, from subtle broadening or humanisation of your sound up to pitch-bending craziness.

The module features a true analogue audio path based on eight BBD devices, known for their authentic and warm timbre. In summary, the Morphor Ensemble is a high-end, flexible chorus module for every analogue lover.

Weight: 167 g
Dimensions: 128.5 × 60.6 × 40 mm
Width: 12 HP

Notes: OCTOPUS is a powerhouse ART controller that takes MIDI in via the USB or DIN connector and outputs 8 ART channels with 8 velocity CV plus 8 drum triggers. Together with the ART oscillators the OCTOPUS provide unprecedented simplicity connecting the modular to your computer sequencers, hardware midi sequencers and keyboards. Each ART channel can play polyphonic notes, monophonic notes or create multi-channel polyphony using an internal voice manager. All together OCTOPUS can play more voices and notes from a single controller than ever was possible in modular. Using ART high speed control signals OCTOPUS can maintain low jitter for tight timing.

Please note, OCTOPUS is not a 1V/Oct midi to CV and should not be confused as one.

Size: 18HP - Depth: 40mm / 1.5"
Power: +12V 140mA / -12V 100mA

Notes: One of our favourite DJ turntables, courtesy of German DJ brand Reloop. Classic Technics-inspired design updated with nice features like reverse mode, 78rpm setting and second start/stop button.

Supplier notes:
With the RP-7000 MK2, Reloop has built a turntable that caters to the high demands of professional DJs and modern nightclubs. With its powerful direct drive motor and rugged construction we were able to develop a sturdy and indestructible turntable that can take on harsh everyday life with ease.

Sturdy Casing Construction:

By using a combination of metal, rubber and synthetic materials, the RP-7000 MK2's housing is more reinforced and heavy than ever before. This results in a turntable that is extremely resistant to vibrations that can be caused by heavy bass sounds in DJ booths and its shock-absorbing feet help to further improve isolation. The surface is coated with a scratch-resistant high-quality deep black or classic silver metallic finish.

Balanced S-Shaped Tone Arm with Upgraded Tone Arm Base:

The RP-7000 MK2 features a statically balanced S-shaped tone arm with hydraulic lift and anti-skating mechanism. The newly developed tone arm base provides improved stability and adjustable height/vertical tracking angle (VTA). The low-resonance tone arm comes with a universal connection for pick-up cartridge systems (SME).

Dual Start/Stop Buttons, Precise Motor Control and Reverse Function:

As well as the above technical innovations, the RP-7000 MK2 is equipped with a few functions that will make any DJ's life much easier. The newly developed aluminium LED target light is freely moveable to help you find the stylus position in dark surroundings. The target light is also removable and easily exchanged. An additional start/stop button has also been integrated to facilitate a vertical setup (battle position) and by using the buttons on the RP-7000 MK2's top panel, you can switch between the three motor speeds (33 1/3, 45 & 78 rpm). Dedicated buttons for forward and reverse mode allow for further creativity in your mix.

High-Resolution Pitch Section with Digital Fader:

Using the high-resolution pitch fader you can adjust the platter speed in the classic turntable pitch range +/-8%. However, the RP-7000 MK2 is also cable of a wider, DJ-friendly +/- 16% pitch range and a massive +/-50% ultra-pitch. This allows for increased creativity when modulating the playing record's tone. If quartz lock is active, the platter speed will remain unaffected by the fader position and will spin at zero pitch (0%).

High-Quality Connections and Integrated Phono Pre-Amp:

Thanks to the recessed rear connection panel, the RP-7000 MK2 can easily be mounted in a flight case and seamlessly positioned next to other DJ gear. The switchable integrated phono pre-amp makes it is possible to use the gold-plated RCA connectors for both phono and line output signals. An optional ground terminal offers additional protection in club environments. All cable connections (RCA/mains) are detachable and easy to exchange, which also helps with transport and storage.

Powerful Motor with Extensive Adjustment Possibilities:

The fine-tuned, quartz-driven motor with digital pitch correction operates at a starting torque of 2.8kg/cm, which can be adjusted up to a maximum of 4.5kg/cm. This makes it an extremely smooth running turntable with wow and flutter of just 0.01% WRMS*. Furthermore, the turntable break speed (platter stop) can be adjusted from 0.2 - 6 seconds and the precision-machined, heavy die-cast aluminium platter is lined with vibration reducing rubber to eliminate unwanted vibrations and resonance.

Notes: ***B-STOCK: Box opened, product in perfect working order***


Intended as an all-rounder for all production purposes, the HD 490 Pro are built for comfort as well as top-notch sound quality thanks to their open-back design. DearVR MIX-SE software allows you to mix, monitor and master with accuracy.

Supplier's Notes:
The perfect mix of clarity, comfort, and reliability, HD 490 PRO studio headphones are built to handle all the complexities of today's music production. The open-back design delivers an extremely wide, dimensional sound stage and ultra-precise sound reproduction, eliminating audio blind spots and ensuring you're in full control of every detail.

Handcrafted and German-engineered with built-to-last components and a lightweight, comfortable design, HD 490 PRO lets you feel the music and forget about the headphones. Meticulously engineered ergonomics eliminate pressure points while the open-back design provides natural ventilation, making hours in the music feel like minutes. Two sets of switchable ear pads, each with a unique sound signature for long hours of mixing and producing, eliminate ear fatigue and are designed with sustainability and durability in mind - they're both washable and replaceable. HD 490 PRO mixing headphones also include the innovative DearVR MIX-SE plugin from Dear Reality, placing you in the "sweet spot" and turning your DAW into an ultimate virtual mixing environment. DearVR MIX-SE simulates the carefully designed acoustics of mixing studios, helping you ensure a balanced, consistent translation of your mix on different systems. HD 490 PRO helps you achieve your full creative vision, eliminating audio blind spots, putting you in full control of every detail, and ensuring accurate playback beyond the studio.

Features

Backed by decades of Sennheiser engineering, technology, research and development
Open-back design with an extremely wide, dimensional sound stage and ultra-precise localization
Uncolored frequency response for honest, dynamic sound reproduction across the full spectrum
Innovative low-frequency cylinder system for full, accurate, and clearly defined low end
Precision-engineered ergonomics eliminate pressure points and deliver supreme, flexible, lightweight comfort
Sennheiser Open-frame Architecture reduces total harmonic distortion (THD) and minimizes resonance,improving audio accuracy
Includes Dear Reality dearVR MIX-SE plugin, turning your DAW into an ultimate virtual mixing environment via advanced spatial audio technology
Two unique sets of ear pads for producing or mixing help eliminate ear fatigue and pinpoint frequencies


Sustainability-inspired with washable, replaceable pads and FSC-certified, forest-friendly packaging
Geometrically angled earcup design optimizes transducer placement for a consistent listening experience
State-of-the-art neodymium magnets for superior driver performance and efficiency
Patented cable coil structure blocks cable-borne noise, ensuring the clearest signal
Ultralight voice coil for remarkably authentic and dynamic audio reproduction
Right and left ear jacks with detachable cable easily adapts to any studio configuration
Patented accessibility features: braille-guided L/R earcups and grooved ear pads for eyeglasses
Open-mesh metal earpiece covers provide natural ventilation
Durable design meticulously engineered in Germany and hand-assembled in Romania

Specs

Weight (g): 260 gr. (w/o cable)
Max. Sound Pressure Level: l128 dBSPL (1 kHz @ 5% THD)
Sensitivity: 105 dBSPL (1 kHz/ 1 Vrms), 96 dBSPL (1 kHz/ 1 mW)
Transducer principle: Dynamic, open
Wearing Style: Circumaural

Total harmonic distortion: <0.2% (1kHz, 100dB SPL)
Connector: 3.5mm/6.3mm

Ambient Conditions

Operating Relative Humidity: 10 to 80%, not condensing
Operating Temperature: +0-CC

Electrical Properties:

Sensitivity: 105dBSPL (1kHz/1Vrms), 96 dBSPL (1kHz/1mW)
Impedance: 130 ohms (1kHz)

Dimensions

Weight (g): 260g (w/o cable)
Cable length: 1.8m

Notes: *** Synthesizer comes with a free copy of The Waldorf Edition software, including D Pole Filter Module, PPG Wave 2.V & Attack ***

Waldorf are back in the game. With the Blofeld. this synthesizer offers all the unique qualities that made Waldorf a truly legendary brand.

The engine inside the heavy duty, full metal chassis of the Blofeld delivers the same fat and rich sound that so many Waldorf users worldwide love when they play their Pulse, Q, Q+, Micro Q, Microwave, Microwave II/XT, or even the flagship Wave.

Yes, you've heard it right. The Blofeld is not only capable of producing these warm, organic analog sounds known from the Q synthesizer line, it also sports a wavetable engine like its predecessors with Wave in their names.

This unique synthesis system is based upon the revolutionary PPG Wave synthesizers of the early 80s. So when you listen to the Blofeld for the first time, you will instantly recognize those edgy, hard-hitting and bell-like timbres that have been an integral part of so many world hits from the PPG era on, and become increasingly popular once more.

In fact it is amazing to realize that nowadays this complex technology fits into such a slim and elegant device. And for a price no-one would have imagined a couple of years ago.

Notes: Two-channel DJ mixer from one of our favourite brands. Ultra-simple design with three-band full-cut EQ and sweet sound on a par with much more expensive boutique mixers. One for the purists.

Supplier's notes:
The NUO 2.0 mixer is a 2 channel analogue mixer addressed to the professional DJ of any kind, in despite of the music style.


The NUO 2.0 mixer features the professional characteristics that made its predecessors acclaimed worldwide and it equips the best analogue components available in the market place in order to obtain the highest sound performance.



Whether you play house, techno or hip hop, perform smoothly or as a scratch DJ, the NUO 2.0 mixer will please all your needs thanks to its versatility and plenty of features, such as the precise and ergonomic full cut EQ, FX Send control per channel in pre or post fader mode, faders curve adjustments and suitability for the awarded magnetic Eternal crossfader for the professional scratch DJ.

Its superb sound quality and robust format, plus balanced XLR master output and booth output for monitoring make it also a perfect mixer for small installations.

Notes: Really nice take on an arpeggiator module here. Four-channel design features editable arpeggio patterns, CV control and transposition. Real-time performance meets customisable melody generation.

Supplier's Notes:
Four-channel arpeggiator with customizable patterns and CV control

Opp Ned is a four-channel arpeggiator designed for creating patterns that can be modified with CV. Opp Ned ships with 12 of Noise Engineering's favourite arps, including tetrads, major, pentatonic major, minor third, and pentatonic minor, but you can edit and save custom arpeggios to twelve memory slots. Recall your custom arpeggios manually or with CV using the Ptn input. If you ever want to restore the factory arps, just head to the Noise Engineering Customer Portal.

The transpose input makes it easy to combine Opp Ned with external sequencers, too!

Arps have never been easier than with Opp Ned.

Features

Size and Power
8HP Eurorack
+12v: 60mA
-12v: 10mA

Opp from Norwegian Opp for "Up"
Ned from Norwegian Ned "down"
"Ups and downs"

What's in the box

Module
Power cable

*** Noise Engineering no longer include screws with newly packaged modules. Bulk screws are available for purchase. ***

Notes: Universal drum synthesizer with roots in the analog world on a swappable oscillator platform

Basimilus Iteritas Alia is a parameterized digital drum voice with its roots in the analogue world. At its heart, the BIA is a simple six-oscillator additive and FM synthesizer with waveform, harmonic spread, and envelope controls. An adjustable noise oscillator and an extreme take on a wavefolder round out its synthesis abilities. Its straightforward controls make sound design fun and performable: create sub-shaking kicks, snares, hats, and unique drum hits with just a few tweaks.

BIA is a classic percussion module but you'll be blown away by how much more it can do. Use it for leads, basslines, or build a whole drum kit with some external CV. Plus, the envelope output means you can use the BIA for shaping and modulating other parts of your patch.

Basimilus Iteritas Alia is available on Noise Engineering's 10HP Alia oscillator platform. Buy an Alia module and use the included USB cable to connect to the Noise Engineering Customer Portal to check out any other Alia firmware, free of charge, any time.

Width: 10HP
Depth: 22mm

Notes: Digital delay meets analogue filtering in this versatile little effects box. Single-tap delay with loop option and clever time multiplication, plus low-pass and high-pass filters.

Supplier's Notes:
Digital delay settings combined with analog sound shaping

SPECIFICATIONS:

Audio output: impedance balanced 1/4" TRS Jack

Audio input: impedance balanced 1/4" TRS Jack

DC Input: 12VDC, 500mA, centre positive, 2.1mm*5,5mm barrel type connector

Dimensions: 145mm x 130mm x 60mm

12VDC 1A power supply included.

Notes: Unlock your creativity anywhere

Introducing SEQTRAK, the ultimate music creation station that empowers you to capture, create and connect with fans - from anywhere you happen to be.

Capture

Capture ideas as quickly as they come.

All-in-one system

Drums. Synths. Sound design. Sequencing. All included. With an array of features, all loaded in a compact, lightweight design, SEQTRAK allows you to start producing right away - no matter where you are. It's got everything you need. And more.

Lightning-fast workflow

SEQTRAK makes capturing ideas simple with a clear 3-part user interface and real-time, hands-on controls. You'll produce your music without menu-diving or waiting for boot times. Seize moments of inspiration and unleash your creativity in no time at all.

Extensive sounds

SEQTRAK extensive library contains over 2,000 presets. You'll find a vast collection of professionally crafted sounds - from rich pianos, to shimmering synths and thundering drums. More will be available with updates to the SEQTRAK app.

Onboard sampling

Capture your own unique sound samples effortlessly. SEQTRAK's sampler offers seven sound slots and a variety of effects, allowing you to shape and transform your samples with ease. Say a phrase, tap a spoon, or record your favourite pet - then customize to create polished Tracks - all in high-quality 44.1 kHz/16-bit format.

Make music on the go

With its compact size, lightweight design, built-in speaker and microphone, as well as a rechargeable battery, you can take SEQTRAK anywhere - from the studio, to the stage, to the sofa. No need to worry about power outlets or tangled cables. Create, perform, and share your music - anytime, anywhere.

Create

Turn your ideas into original music.

Sound engines + effects

Double your creative potential with two versatile sound engines. AWM2 (Advanced Wave Memory 2) boasts an impressive 128-note polyphony and specializes in authentic sounds like pianos, strings, and guitars, while the four-operator FM engine produces stunning synth pads, leads, FM electric pianos, and more. Additionally, SEQTRAK includes powerful effects for a polished sound.

Sequencer

SEQTRAK's advanced Sequencer allows for intuitive and seamless composition, arrangement, and playback of musical Tracks. With its user-friendly interface, you can easily navigate and control various parameters, such as tempo, swing, and track settings.

Sound editing

Inside the included SEQTRAK app you'll find an intuitive graphic user interface that lets you quickly dive into each Track and shape your sounds with precision. Editing includes a comprehensive set of functions, including envelopes, filters, and effect manipulation, enabling you to refine your compositions with meticulous detail.

Connect

Share your music. Connect with your fans.

Performance

Take centre stage with the SEQTRAK's powerful performance features. Create arrangements on-the-fly by combining Tracks and Patterns, remixing beats, and muting/unmuting Tracks in real-time. Add polish and sparkle to your music using global effects - then control these sounds live while you perform.

Visualizer

The SEQTRAK app has a Visualizer mode that transforms your music into a captivating visual experience. With this free performance and production feature, you'll bring your music to life with stunning visuals that sync perfectly with your songs. Customize and tweak Patterns, motion effects and more, however you see fit. There's even an Augmented Reality (AR) mode that allows you to integrate 3D virtual objects into real-world live videos.

Connectivity

- Bluetooth MIDI: Connect wirelessly to the SEQTRAK App & Visualizer, enhancing convenience and mobility.

- Wi-Fi: Transfer WAV samples wirelessly, eliminating the need for cables.

- MIDI In/Out: Connect to other hardware synths, MIDI controllers, or a computer; expanding your sound options and enabling integration with external devices.

- USB-C: Establish a single cable connection for MIDI and stereo audio to a computer simplifying setup and streamlining workflow.

- AUX In: Connect to drum machines, synths, and other external sources, expanding and diversifying your sound.

*Wireless functions may not be available depending on your area. Check with your Yamaha dealer. Windows PC cannot use wireless functions.

Specs
Tone Generator: AWM2, FM: 4 operators
Maximum Polyphony: AWM2: 128, FM: 8
Wave: Preset: 800 MB (when converted to 16-bit linear format), User: 500 MB
Effects: Reverb × 12 types, Delay × 9 types, Master Effect × 85 types, Single Effect × 85 types, Master EQ 5 bands, LP-HP filters for each track

Tracks

Track Types: DRUM, SYNTH, DX, SAMPLER
Number of Tracks: 11

Sounds

Number of Sounds: Preset Sound: 2032 Preset Sampler Sound: 392 *Can be added from the SEQTRAK app
Connectivity


USB: USB Type-C (power, MIDI to host, MIDI to device, audio)
Headphones: [PHONES] (stereo mini jack)
A/D INPUT: [AUDIO IN] (stereo mini jack)
MIDI: [MIDI] IN/OUT *Only included cable can be used.

Functions
USB audio interface: [Sampling Frequency = 44.1 kHz (quantization bit depth: 24-bit)] Input: 2 channels (stereo 1 channel), Output: 2 channels (stereo 1 channel)
Bluetooth: MIDI transmission/reception (wireless capability varies by country)
Wi-Fi: Data transmission/reception with dedicated app (wireless capability varies by country) The highest SAR value: 1.11 W/kg

Sound System

Speakers: 2.3 cm, 1 W
Microphone: Internal MEMS microphone

Power Supply

Power Source: Rechargeable lithium-ion battery (2,100 mAh, 7.6 Wh) USB Power Delivery (PD) (Output voltage: 4.8 V to 5.2 V, Output current: 1.5 A or greater)
Power Consumption: 6 W
Battery life for continuous use: 3-4 hours
Battery charge time: 3-5 hours

Size/Weight

Dimensions

Width: 343 mm (13-1/2")
Height: 38 mm (1-1/2")
Depth: 97 mm (3-13/16")
Weight: 0.5 kg (1 lb 2 oz)

Packing Box

Width: 420 mm (16-9/16")
Height: 90 mm (3-9/16")
Depth: 165 mm (6-1/2")

Included accessories: USB-C to USB-C cable, dedicated MIDI Converter Cable, Quick Operation Guide, Safety Guide
Dedicated Software: SEQTRAK app
Sequencer Block - Maximum Steps: 128

Notes: Part of Mackie's excellent ProFX series, the 12v3+ combines a 12-channel analogue mixer with built-in USB audio interface for quality recordings. Includes GigFX+ digital effects, colour LCD screen and Bluetooth input.

Supplier's Notes:
12-channel professional analogue mixer and USB-C audio interface with powerful enhancements for studio-quality recordings and live streams. Capture your performance with award-winning Onyx preamps, channel EQ and analogue compression. Upgraded GigFX+ effects enhance your sound, plus you can edit and save your presets on the fly via the full-colour display. Switch between recording modes to track dry or include the FX, or use loopback mode to stream video games or perform over backing tracks without feedback. You can even bring in podcast guests over the phone via Bluetooth on a dedicated channel. With easy connectivity, the warmth of analogue and an upgraded FX engine, Mackie ProFX12v3+ is the perfect centrepiece for your studio.

Mackie ProFXv3+ Series is a professional analogue mixer and USB-C audio interface with powerful enhancements for studio-quality recordings and live streams. Capture your performance with Onyx preamps and channel EQ, add computer audio via loopback, bring in calls via Bluetoothr and enhance your sound with upgraded GigFX+ effects on a colour LCD screen.

With up to 60 dB of gain and ultra-low noise, ProFXv3+ series mixers allow you to sound better than ever. Record podcasts, stream gameplay or produce the next hit-all with ultra-clean, transparent audio. Our award-winning Onyx Mic Preamps deliver analogue warmth so you sound great, no matter what you do.

Enhance your sound using high-resolution GigFX+ effects, with 12 presets you can edit and save on the fly via the full-size LCD screen. Combining the warmth of an analogue recording console with precise digital effects, ProFXxv3+ is an ideal mixer for home studios and live events alike.

Capture your stream or performance at pristine 24-bit / 192 kHz quality with a built-in 2x4 USB-C audio interface, complete with three recording modes: Standard for the full mix with effects, Loopback to include computer audio with mixer signal for streaming, and Interface to record channel 1-2 without effects processing.

Use the dedicated Bluetooth channel to send and receive audio from devices like smartphones and tablets. For podcasters, it's an effortless way to bring in phone calls. For musicians and performers, it's the easiest option for streaming outside music and backing tracks.

Features

7 Onyx mic pres with up to 60 dB of gain and ultra-low noise performance
High-resolution GigFX+ effects engine
Full-colour LCD display for editing and saving effects presets
24-Bit / 192 kHz 2x4 USB-C audio interface
Three recording modes: Standard, Loopback and Interface
Bi-directional Bluetoothr for music playback and caller integration
3-band EQ on all channels
One-knob compression on channels 1-4
Hi-Z switches allow direct connection of instruments
100 Hz low-cut filter and 48V phantom power on all mic channels
Stereo 1/8" input on channel 11/12
Separate FX, monitor and subgroup busses
Headphone output with separate level and blend control
Easily blend between monitoring your computer output and a latency-free feed from the mixer
Waveform OEM recording software Included
Legendary Built-Like-A-Tank design
Solid steel chassis
Tough ABS side protection

Line Inputs: 12
Mic Inputs: 7
Aux Sends: 1
Subgroups: 2
Compressors: 4
Effects: GigFX+
USB I/O: 2x4
USB Type: C
Recording Modes: Yes
Bluetooth w/MixMinus: Yes

Notes: Alia is a 10HP oscillator platform much like the Versio and Legio platforms. Launched in 2023 with a reboot of the beloved Basimilus Iteritas and Manis Iteritas, along with a new oscillator, Debel Iteritas, Noise Engineering is back with three more firmwares for the platform.

Separate hardware is available for each module, and a customer with any Alia module can try any firmware for free by going to the Noise Engineering Customer Portal and connecting with the included USB cable.

Cursus Iteritas Alia

Dynamically generated wavetable oscillator using orthogonal functions on a swappable oscillator platform

Cursus Iteritas Alia is Noise Engineering's take on a wavetable-inspired additive oscillator. Cursus creates sounds from a dynamically generated wavetable, then gives the user spectral controls to sculpt and modulate. Cursus has three different algorithms, based on different conceptualizations of frequency: Fourier, which uses sine waves; Daubechies, using wavelets; and Walsh mode, using the Walsh transform. All that math is hidden behind a set of friendly controls that produces an extremely wide variety of harmonic sounds, perfect for melodic sound design. Cursus has long been regarded as the gentlest Iteritas, but if you need some beef and extra low end, try mixing the suboscillator output into your patch.

CIA is available on Noise Engineering's 10HP Alia oscillator platform. Buy an Alia module and use the included USB cable to connect to the Noise Engineering Customer Portal and check out any other Alia firmware, free of charge, any time.

Width: 10HP
Depth: 22mm

Notes: Intended as an all-rounder for all production purposes, the HD 490 Pro are built for comfort as well as top-notch sound quality thanks to their open-back design. DearVR MIX-SE software allows you to mix, monitor and master with accuracy.

Supplier's Notes:
The perfect mix of clarity, comfort, and reliability, HD 490 PRO studio headphones are built to handle all the complexities of today's music production. The open-back design delivers an extremely wide, dimensional sound stage and ultra-precise sound reproduction, eliminating audio blind spots and ensuring you're in full control of every detail.

Handcrafted and German-engineered with built-to-last components and a lightweight, comfortable design, HD 490 PRO lets you feel the music and forget about the headphones. Meticulously engineered ergonomics eliminate pressure points while the open-back design provides natural ventilation, making hours in the music feel like minutes. Two sets of switchable ear pads, each with a unique sound signature for long hours of mixing and producing, eliminate ear fatigue and are designed with sustainability and durability in mind - they're both washable and replaceable. HD 490 PRO mixing headphones also include the innovative DearVR MIX-SE plugin from Dear Reality, placing you in the "sweet spot" and turning your DAW into an ultimate virtual mixing environment. DearVR MIX-SE simulates the carefully designed acoustics of mixing studios, helping you ensure a balanced, consistent translation of your mix on different systems. HD 490 PRO helps you achieve your full creative vision, eliminating audio blind spots, putting you in full control of every detail, and ensuring accurate playback beyond the studio.

Features

Backed by decades of Sennheiser engineering, technology, research and development
Open-back design with an extremely wide, dimensional sound stage and ultra-precise localization
Uncolored frequency response for honest, dynamic sound reproduction across the full spectrum
Innovative low-frequency cylinder system for full, accurate, and clearly defined low end
Precision-engineered ergonomics eliminate pressure points and deliver supreme, flexible, lightweight comfort
Sennheiser Open-frame Architecture reduces total harmonic distortion (THD) and minimizes resonance,improving audio accuracy
Includes Dear Reality dearVR MIX-SE plugin, turning your DAW into an ultimate virtual mixing environment via advanced spatial audio technology
Two unique sets of ear pads for producing or mixing help eliminate ear fatigue and pinpoint frequencies


Sustainability-inspired with washable, replaceable pads and FSC-certified, forest-friendly packaging
Geometrically angled earcup design optimizes transducer placement for a consistent listening experience
State-of-the-art neodymium magnets for superior driver performance and efficiency
Patented cable coil structure blocks cable-borne noise, ensuring the clearest signal
Ultralight voice coil for remarkably authentic and dynamic audio reproduction
Right and left ear jacks with detachable cable easily adapts to any studio configuration
Patented accessibility features: braille-guided L/R earcups and grooved ear pads for eyeglasses
Open-mesh metal earpiece covers provide natural ventilation
Durable design meticulously engineered in Germany and hand-assembled in Romania

Specs

Weight (g): 260 gr. (w/o cable)
Max. Sound Pressure Level: l128 dBSPL (1 kHz @ 5% THD)
Sensitivity: 105 dBSPL (1 kHz/ 1 Vrms), 96 dBSPL (1 kHz/ 1 mW)
Transducer principle: Dynamic, open
Wearing Style: Circumaural

Total harmonic distortion: <0.2% (1kHz, 100dB SPL)
Connector: 3.5mm/6.3mm

Ambient Conditions

Operating Relative Humidity: 10 to 80%, not condensing
Operating Temperature: +0-CC

Electrical Properties:

Sensitivity: 105dBSPL (1kHz/1Vrms), 96 dBSPL (1kHz/1mW)
Impedance: 130 ohms (1kHz)

Dimensions

Weight (g): 260g (w/o cable)
Cable length: 1.8m

Notes: Built for comfort as well as top-notch sound quality, Sennheiser's HD 490 Pros are a premium open-backed model for all production tasks. The Plus package includes a 3m cable, carry case and spare headband pad in addition to the standard bundle.

Supplier's Notes:
The perfect mix of clarity, comfort, and reliability, HD 490 PRO studio headphones are built to handle all the complexities of today's music production. The open-back design delivers an extremely wide, dimensional sound stage and ultra-precise sound reproduction, eliminating audio blind spots and ensuring you're in full control of every detail.

Handcrafted and German-engineered with built-to-last components and a lightweight, comfortable design, HD 490 PRO lets you feel the music and forget about the headphones. Meticulously engineered ergonomics eliminate pressure points while the open-back design provides natural ventilation, making hours in the music feel like minutes. Two sets of switchable ear pads, each with a unique sound signature for long hours of mixing and producing, eliminate ear fatigue and are designed with sustainability and durability in mind - they're both washable and replaceable. HD 490 PRO mixing headphones also include the innovative DearVR MIX-SE plugin from Dear Reality, placing you in the "sweet spot" and turning your DAW into an ultimate virtual mixing environment. DearVR MIX-SE simulates the carefully designed acoustics of mixing studios, helping you ensure a balanced, consistent translation of your mix on different systems. HD 490 PRO helps you achieve your full creative vision, eliminating audio blind spots, putting you in full control of every detail, and ensuring accurate playback beyond the studio.

Features

Backed by decades of Sennheiser engineering, technology, research and development
Open-back design with an extremely wide, dimensional sound stage and ultra-precise localization
Uncolored frequency response for honest, dynamic sound reproduction across the full spectrum
Innovative low-frequency cylinder system for full, accurate, and clearly defined low end
Precision-engineered ergonomics eliminate pressure points and deliver supreme, flexible, lightweight comfort
Sennheiser Open-frame Architecture reduces total harmonic distortion (THD) and minimizes resonance,improving audio accuracy
Includes Dear Reality dearVR MIX-SE plugin, turning your DAW into an ultimate virtual mixing environment via advanced spatial audio technology
Two unique sets of ear pads for producing or mixing help eliminate ear fatigue and pinpoint frequencies


Sustainability-inspired with washable, replaceable pads and FSC-certified, forest-friendly packaging
Geometrically angled earcup design optimizes transducer placement for a consistent listening experience
State-of-the-art neodymium magnets for superior driver performance and efficiency
Patented cable coil structure blocks cable-borne noise, ensuring the clearest signal
Ultralight voice coil for remarkably authentic and dynamic audio reproduction
Right and left ear jacks with detachable cable easily adapts to any studio configuration
Patented accessibility features: braille-guided L/R earcups and grooved ear pads for eyeglasses
Open-mesh metal earpiece covers provide natural ventilation
Durable design meticulously engineered in Germany and hand-assembled in Romania

Specs

Weight (g): 260 gr. (w/o cable)
Max. Sound Pressure Level: l128 dBSPL (1 kHz @ 5% THD)
Sensitivity: 105 dBSPL (1 kHz/ 1 Vrms), 96 dBSPL (1 kHz/ 1 mW)
Transducer principle: Dynamic, open
Wearing Style: Circumaural

Total harmonic distortion: <0.2% (1kHz, 100dB SPL)
Connector: 3.5mm/6.3mm

Ambient Conditions

Operating Relative Humidity: 10 to 80%, not condensing
Operating Temperature: +0-CC

Electrical Properties:

Sensitivity: 105dBSPL (1kHz/1Vrms), 96 dBSPL (1kHz/1mW)
Impedance: 130 ohms (1kHz)

Dimensions

Weight (g): 260g (w/o cable)
Cable length: 1.8m/3m

Notes: Incredible value as always from the latest version of Arturia's Essential 88-key MIDI controller. Pads, faders, rotaries and a large LCD screen. Excellent integration with DAWs and the included Analog Lab V plugin.

Supplier's Notes:
Control your DAW, play with MIDI hardware, and get hands-on with your own style of music-making with KeyLab Essential mk3 88. This full-range keyboard controller removes barriers and makes creativity simple, with expressive semi-weighted keys, idea-sparking creative functions, and the most inspiring music software included as standard.

The streamlined piano range keyboard

Expand your musical horizons with a semi-weighted 88-note keyboard that removes barriers and makes your creative life easier. From studio to stage, DAW to MIDI hardware, KeyLab Essential 88 mk3 keeps things simple so you can focus on your music with full piano-range expressivity.

Your essential ingredients for creativity

KeyLab Essential provides an array of useful & intuitive controls that'll get the job done. Enjoy a comfy keybed, tactile faders/encoders/pads, and thoughtful layout that'll make sense for your setup. Enjoy a hands-on instrument experience balanced with software flexibility.

The best DAW integration

Get creative right out the box with KeyLab Essential's custom DAW scripts, bringing pre-mapped controls into your workflow with any major DAW. Not only that, but the KeyLab Essential controls work seamlessly with Analog Lab V, the included sound anthology plugin - letting you freely explore thousands of sounds, old and new.

Your musical workhorse

For when you want to get experimental, find a new sound, or just need a bit of extra inspiration, KeyLab Essential has a few tricks up its sleeve. Create fun ever-changing melodies with the Arpeggiator, weave rich chord voicings with Chord play, and always stay in key thanks to Scale mode.

What's new compared to the previous version?

A bigger display with 4 contextual buttons
5 dedicated DAW scripts, plus MCU & HUI protocols, for controlling any DAW
Enhanced integration with Arturia Software
Creative features: Scale mode, Chord Play, Arpeggiator (with presets), Hold function
2 Pad Banks (for finger drumming, clip launching, or User configuration)
Bigger software bundle (Analog Lab V, Ableton Live Lite, NI The Gentleman, UVI
Model D, Loopcloud & Melodics)
Multi-purpose pedal input (Sustain, Footswitch or Expression)
USB-C
Eco-designed

Included Software

You'll also get 6 titles giving you everything you need to make music your own way - here's

What's included:
Analog Lab V software with 2000 synth & keyboard sounds
Ableton Live Lite
UVI Model D & Native Instruments The Gentleman pianos
Loopcloud subscription
Melodics subscription

Box content
Quick Start
Registration card
USB Cable (C/A)

Notes: Black version of Bitbox's excellent sampling module. Touchscreen-based design allowing up to eight stereo samples, recording directly or loaded from SD card.

Supplier's Notes:
Bitbox micro provides Eurorack sampling for smaller racks and smaller budgets. In only 18 HP of rack space you can get a touch screen based sampler with support for 8 stereo sample pads. Now you can record samples directly into the module or load them from the microSD card. Trigger your samples via CV or MIDI, then apply effects and mix the outputs. Save your configurations to multiple presets for later reuse.

Powerful Sampling Capabilities in a Smaller Form Factor

With the sampling features of Bitbox micro you can add interesting new ways of generating sound and music to your Eurorack. Trigger one shots, play time synched loops or record live looping. Bitbox micro is equally at home in your studio or as a component of your live performance.

Features

Sample Playback
Play up to 24 stereo polyphonic notes when your samples fit in the 64 MB of internal memory or up to 8 larger stereo samples streaming directly from the microSD card
Configure 8 stereo sample pads per preset as single or multi-samples, clips, slicers, granular or new recordings
Stream long samples from the microSD card with a max sample size of 4 GB, which can be many hours of audio
Trigger samples with the touch screen, CV gate inputs, or MIDI input
Control how samples start and stop by choosing from one-shot, toggle, and gate launch modes
Tweak playback through a variety of sample parameters, including start position, length, pitch, gain, filter, loop mode, launch quantization, ADSR, Exclusive Grouping, clip synchronization, slice placement and sequencing, grain size, grain spread, grain count, and MIDI note and channel mapping

Sample Recording

Record Eurorack level audio straight into the module:
Record samples from a stereo audio input pair
Configure each pad for stereo or mono recording with the option to synchronize the start and stop times to clock inputs
Trigger recording via audio level threshold
Create perfectly sized loops by setting the recording length
Enable immediate playback after recording for live looping capabilities
Make recordings up to 4 hours in length
Resample the master output without patching
Automate recording of a multi-sample bank via MIDI and CV
Store recorded samples as WAV files on the micro SD card then remove the card to transfer them to your computer

Sample Modes

Find creative ways of using your samples with our 5 sample playback modes:
Trigger one shots or launch loops using sample mode
Load a folder of samples into a sample mode pad to improve the quality of the pitch shifting when playing a sample chromatically or to trigger different samples with each note
Play time-synchronized loops with constant pitch time shifting in clip mode
Skip between slices of a WAV using slicer mode
Create rich textures and other worldly sounds with granular mode

Inputs and Outputs

Use the 8 inputs the way you want: assignments include a stereo audio input, up to 8 gate inputs, up to 8 CV inputs and 1 clock input.
Route the audio from each pad out to one of 3 stereo audio outputs or one of 6 mono audio outputs
Listen to all of the pad outputs combined on the master stereo output
Inputs and outputs are DC coupled so you can record and play out CV signals
External Control and Synchronization
Playback can be immediate or synchronized to internal clock, TRS clock in, or MIDI clock in and out
Confidently connect with both TRS MIDI Type A and Type B, no adapter needed
Play a single or multi-sample pad pitch shifted using MIDI notes or CV
Trigger different sample slices using MIDI notes or CV
Modulate a wide variety of sample parameters through the MIDI input and up to 8 CV signals
Quickly set up MIDI modulation using Learn mode i no need to look up CC numbers

Module Features

Use the 2" diagonal touch screen to intuitively explore the features of the module
Get more creative with double the processing power of the original bitbox
Refine your sound with reverb and delay
Import or export WAV files with your Mac or PC using a microSD card
Save and recall multiple presets
Increase your capacity with larger microSD cards
Compare to Our Other Samplers
Our Sampler Selection Guide shows you how bitbox micro compares to our other samplers.

What Is Included

When you purchase bitbox micro, you will receive:

a bitbox micro Eurorack module
a microSD card with a bank of demo presets and samples loaded on it
a Eurorack power cable
a bitbox micro Quick Start guide
a MIDI Adapter
Firmware Updates
Get new features by downloading firmware updates from forum.1010music.com.

Documentation and Video Tutorials

The Bitbox Micro Support page has links to videos, the quick start guide and the full user manual to get you up and running quickly and answer your detailed questions. If you can't find answers there, reach out to the community with questions on the 1010 Music forum.

Notes: The Control Voltage Processor from Verbos Electronics GmbH is a suite of control voltage processing possibilities divided into 3 sections in a slim 18HP package. The lower 2 sections are DC coupled mixers that allow mixing, inverting, offsetting, scaling, multiplying, dividing, crossfading or a combination of these functions. The top section is a voltage controlled slewing processor with independent control of Positive and Negative slew rate, with some unique tricks. The Positive and Negative slew, or Rise and Fall rates if you like, have reversing attenuators. The slopes can be blended from linear to RC curves (starting all slides fast and ending slow, like a proper "East Coast" Portamento) without a change in speed. It can be triggered like an AD envelope and has a Gate out that goes high when the CV out is below 100mV. Of course it can loop by patching the Gate out to the Trigger in. The Bounce control adds a unique flare of overshoot to CV changes, a bit like the effect of stopping a tape reel from turning and then letting it go. The combination of multiple voltage processors offers the user the functions of analogue computer.

Notes: Pulse 2 Analog Synthesizer is proof positive that good things can come to those that wait. For ever since this high-quality synthesizer developer discontinued its original rack-mountable Pulse and Pulse+ programmable analogue monosynths boasting ballsy bass tones and legendary leads beyond compare, those Nineties electronic musicdominating sounds have been severely sought after by those in the know. Which was exactly what drove us into development overdrive to produce an all-new Pulse fit for the 21st Century.

As an all-new, all-analogue synthesizer design, Pulse 2 flawlessly delivers exactly what synth connoisseurs around the world have been truly craving for quite some time - three analogue oscillators living in perfect harmony with a VCF (VoltageControlled Filter), yet we did not stop there: the fresh filter circuits in the Pulse 2 now offer 12dB Highpass and Bandpass modes in addition to 24dB/12dB Lowpass for strengthened sound-sculpting flexibility, while we added analogue Filter FM, two Overdrive circuits, and Ring Modulation from OSC 3, together with Paraphonic and Unison modes allowing up to eight-voice chords - a fantastic feature found on our recently-released Rocket Synthesizer.

Pulse 2 is housed in a sturdy metal desktop casing. Alongside its generous 128x64-character backlit LCD, eight eye-catching stainless steel knobs are available to nimbly navigate through the parameter matrix - logically laid out across the front panel for all to see at all times, set the master Volume, and easily edit display-accessible parameters.

Connectivity comes well catered for courtesy of USB, MIDI In, MIDI Out, Ext In (external analogue signal input), line OUT, and headphone output - not forgetting, of course, CV Out (supporting both the V/octave and Hz/V standards) and Gate Out (V-Trigger- and S-Trigger-compatible), allowing a myriad of suitably equipped older (or newer) synths to be connected to the Pulse 2 to mirror whatever MIDI 'note' information is being played by the Pulse 2, including the output of its powerful ARP (arpeggiator). And if that's not enough to be getting on with, the CV Out can even be modulated in the eight-slot modulation Matrix, making for even more tantalising tone colours and performance possibilities!

Alongside analogue must-haves like a noise generator, Pulsewidth modulation, and hard Sync, other notable features include an Alternating Pulsewidth Modulation mode new to the Pulse 2 (offering a dense PWM sound without affecting perceived loudness), and an XOR Osc mode (that is a binary XOR combination of two PWM oscillators with two distinct output levels - high and low only - capable of producing inharmonic spectra unlike anything associated with any analogue synthesizer other than the original Pulse) - all of which, of course, contribute to kickstarting those still soughtafter sounds right here, right now in the 21st Century. Speaking of which, 500 onboard sound programs should be more than
enough to keep the most diehard synthesist smiling! What's more, all are backwards-compatible with the original Pulseseries, so original Pulse owners can quickly transfer their favourite sounds to their new Pulse 2 via MIDI (dump).

Notes: The NT5 matched pairs are a masterpiece of small-diaphragm cardioid-condenser microphone design.

Intended for recording acoustic instruments, drum overheads, cymbals and live performances, the compact externally polarized mic employs a 1/2" capsule, an active J-FET impedance converter with bipolar output buffer.

Finished in durable satin nickel, the NT5 is intended for either single or stereo X/Y mic set-ups. The NT5 matched pairs comes supplied in a custom carry case with windshields and mounts.

NT5 - Matched Pair Box Contains :

As of 2022, the updated packaging is made from engineered cardboard instead of foam or plastic blister, making it more environmentally friendly, and they all share a unified look to further enhance brand consistency.

RODE have also made a change to the box contents removing the hard cases and including a zip case instead. This has meant that the new dimensions of the packaging are significantly smaller than the original packaging.

2 x NT5
2 x RM5 (mic clip)
2 x WS5 (windshield)
1 x ZP1 (zip pouch)

Notes: Offspring from a noble house, the little synthesizer machine with the big and evil sound.

Waldorf is back in the game. With the Blofeld.

This synthesizer offers all the unique qualities that made Waldorf a truly legendary brand.

The engine inside the heavy duty, full metal chassis of the Blofeld delivers the same fat and rich sound that so many Waldorf users worldwide love when they play their pulse, Q, Q+, micro Q, microwave, microwave II/XT, or even the flagship wave.

Notes: The second batch of Animal Factory's dual-valve saturation all-rounder features hand-matched 6J32P valves for a faster, slightly more precise take on this unique blend of mixing, VCAs, distortion and wave folding.

Supplier's Notes:
Orobas is a dual tube amplifier that is composed of two identical units.

Each channel has two audio inputs with dedicated gain controls and one output volume control.
Thanks to clever routing, a wide variety of sounds can be created. The two channels can be connected in parallel or in series (Parallel / Series). In series connection, the output of channel 1 is still active, good for parallel signals (note: each channel output is phase-inverted in relation to the opposite input). This way, feedback can be generated by feeding back the signal from output 1 to e.g. a control voltage input.

The screen control voltage input determines the gain and the sound characteristics. Additionally, the input is normalized to INPUT 1 of the respective channel.

The Suppress control voltage input is normalized to the input signal if nothing is connected. The purpose of this input is to direct electrons reflected from the anode back to the anode. Turning the knob to the positive does not change as much, turning it to the negative slightly attenuates overtones. With a positive control voltage the change is minimal, but with a negative control voltage you can realize e.g. ducking effects and effectively switch off the tube. Audio Rate Modulation is also possible here and a bit milder than with the Screen CV, but still effective.

The evocation potentiometer controls the feedback of the second output into the first channel. The sonic performance is very much dependent on the Plate Bias switch. The Plate Bias switch effectively controls the headroom. This allows you to use the tubes in three different settings, from fuzz sound to full distortion.

*This version is equipped with other tubes than in version 1.

Tube length: 55mm

Depth: 45mm

Notes: Ultra-high quality portable recording courtesy of this premium model from the ever-reliable Tascam. Ideal for podcast recordings, video soundtracks or interviews. Includes stereo mics and multi-track options for external sound sources.

Supplier's Notes:
Discover the Subtle Differences in High-Quality Content Creation

You don't have time for long set-ups if you regularly create new audio content on the go. And sound quality must meet the highest standards if your productions are to be successful. With the Portacapture X8 from Tascam, high-quality recordings are now even easier. Thanks to its app- like operation via a large colour touch screen, this field recorder can be quickly adapted to the situation at hand to record up to six signals plus a stereo mix in impressive 32-bit/192-kHz resolution. Enjoy the built-in mixer with EQ, dynamic processing and effects, use the USB mode later to process the material on a computer with minimal loss, or stream your show directly to the Internet.

The Portacapture X8 makes all the difference.

The Portacapture X8 isTASCAMs New Generation High Resolution Adaptive Multi-Recorder.Featuring 192kHz/ 32-bit floating point recording technology for highest audio quality.

Combined with the recorder's intuitive Launcher system and the incorporated 3.5-inch color touch panel display, the Portacapture X8 provides users with more time to focus on the actual recording without having to struggle with complicated settings. It uses an app-like set of configurations that optimize the unit for various recording tasks, including multitrack recording, voice capture for interviews, podcasts, music recording, field recording, and ASMR (Autonomous Sensory Meridian Response) for capturing those unusual / sensory related sounds.

The Portacapture X8 comes with two large 14.6mm diameter built-in condenser microphones. With the TASCAM developed HDDA mic preamps, these microphones are well suited for high quality audio recording and can easy be set for A-B and X-Y microphone patterns.

The TASCAM Portacapture X8 provides a wealth of DSP capability that include Compressor, Limiter, Low-Cut Filter, Noise Gate, Reverb, Auto Gain Control, and more.

Wireless remote control is possible via the TASCAM Portacapture Control using the optional AK-BT1 Bluetooth dongle with your Android or iOS device.

With its 2 built-in large format stereo mics, 4 XLR inputs with support for both mic and line-level, AUX-IN, LINE OUT, and CAMERA IN/OUT terminals, the Portacapture X8 provides an abundance of IN/OUT choices for multiple recording scenarios. The 3.5mm CAMERA EXT/IN connector also supports audio input of wireless microphones and more. Additionally, the Portacapture X8 is equipped with a CAMERA/LINE output with an attenuation function that allows for sending audio to external devices such as cameras.

Together with its multitrack record capability of 8 tracks (6 tracks plus 2 mix) and its 8-IN / 2-OUT USB Type C audio interface with support for USB bus power, the Portacapture X8 is a full-featured powerful handheld recorder both on its own or with a computer. Audio monitoring is possible via either the unit's headphone output or the built-in speaker and the recorder also provides both mark and slate tone functions. Supported recording media includes micro SD, micro SDHC, and micro SDXC cards up to 512GB capacity.

Includes
Portacapture X8
Included mics × 1 (left/right pair)
AA alkaline batteries × 4
Owner's Manual(including warranty) × 1
TASCAM ID registration guide × 1

Optional accessories
Bluetooth Adapter AK-BT1

Specifications

Recorder Specification

Recording Media: SD/SDHC/SDXC cards (64MB to 512 GB)
Recording/playback formats: Wave Files (BWF) 44,1/48/96/192 kHz
Input Channels: 6
Max. Recordable tracks:8 tracks (6 track + Stereo Mix)
Analoge Audio inputs/ outputs
Mic inputs (balanced)
Input jacks 3-6(input set to "MIC")

Connectors

XLR-3-31 equivalent (1: GND, 2: HOT, 3: COLD)
6.3mm (1/4") standard TRS jacks

Input

(Tip: HOT, Ring: COLD, Sleeve: GND)
Note: phantom power supported by XLR only
Input impedance: 2.2kO or higher
Maximum input level: +2 dBu
Minimum input level: -75dBu
Input jacks 3-6(Input set to "LINE")

Dimensions: 83 x 205.6 x 41.5mm (W× H× D, including protrusions)
Weight: 472g/381g (with/without batteries)

Notes: Desmodus's Aggressive Reverb/Delay Counterpart.

Not quite a reverb, not quite a delay, it's Desmodus's more aggressive clocked counterpart. More distortion, more in-your-face atmospheres, and synced delays for creating your tails in a whole new way. Use Electus Versio as a spacey clocked delay, as a reverb that starts with some synced echoes, or as a completely new way to create evolving spaces.

Notes: Desmodus's Aggressive Reverb/Delay Counterpart.

Not quite a reverb, not quite a delay, it's Desmodus's more aggressive clocked counterpart. More distortion, more in-your-face atmospheres, and synced delays for creating your tails in a whole new way. Use Electus Versio as a spacey clocked delay, as a reverb that starts with some synced echoes, or as a completely new way to create evolving spaces.

Notes: All the modulation effects you could dream of in a compact pedal. Chorus, Phaser, Tremolo, Vibe, Rotary and Filter programs give you plenty of sonic options with nice tweakability and superb sound quality.

Supplier's Notes:
The M1 is a powerful multi-function modulation machine with six customized, studio-quality programs: Chorus, Phaser, Tremolo, Vibe, Rotary, and Filter. Each program has a wealth of options to tune, tweak, customize and then save to one of nine onboard presets. A sound explorers delight, the M1 features a dedicated lo-fi knob allowing you to mix various lo-fi parameters to every program. Add subtle movement and texture to float under your playing or make a massive statement with a thick swirling chorus to choppy panning tremolo. Write your sonic story in any style and genre with the M1 High-Fidelity Modulation Machine.

Programs

Chorus - Find subtle chorus to be vibrant and lush tri-chorus that will instantly teleport you to the 80s. Type I is a traditional chorus great for tight smooth chorus tones. Type II adds a second chorus with an offset rate and depth. Thanks to the constructive interface, it has a more dramatic character caused by essentially running two chorus pedals in series. Type III finds its roots in the classic tri-chorus effect running three chorus units in parallel for a lush multi-dimensional chorus.
X knob controls Lag to set the maximum allowed amount of pitch detuning.

Phaser -Classic 70s phaser sounds we all know and love, with added features that you wouldn't expect. Similar to the Lillian, Type I is a 2-Stage Phaser that produces a single notch to the classic mild phaser. Type II is a 4-Stage model producing 2 notches for a stronger effect. Type III is a phaser modeled after the unique tuning and LFO shape found in a Uni-Vibe.

X knob introduces Feedback for a more dramatic phaser effect.

Tremolo - This program emulates a tremolo with three algorithms containing all the bells, whistles, and even a cherry on top. Type I is excellent for traditional sounds similar to optical and bias tremolos that raise and lower the entire frequency range - similar to the Monument in standard mode. Type II is a warm and cozy harmonic tremolo - similar to the Monument in harmonic mode. This unique sound is formed by raising and lowering your high and low frequencies opposite each other. Type III offers several predefined patterns for rhythmic sequenced pulsing tremolo. X knob manipulates the phase of the left and right volume modulation for a wide stereo panning effect. Shape and Symmetry in Type III (pattern Trem) select the pattern group and patterns within each group.

Vibrato - Make good parts great with detuned, warbly, and vintage sounds that harken back to the 60s. Type I focuses on traditional vibrato sounds like those found in Julia and Julianna's "V" mode. Old record players inspire type II with classic RPM's on the rate knob and some noise character you'd find in your dad's old dusty Speedwagon LPs. The rate knob can select 33rpm, 45rpm, and 78rpm speeds in this mode. Type III is our take on the wow and flutter pitch characters found in old tape players. Warm and charming with a hint of nostalgia. X knob manipulates the phase of the pitch modulation when connected with stereo outs in Type I and Type II and controls the amount of "flutter" modulation applied in Type III.

Rotary - Because you can't fit a Leslie speaker on your pedalboard, type I aims for that traditional watery sound of a well-oiled Leslie speaker. Type II only spins the horn but still plays the sound out of the drum. Type III only spins the drum but still plays sound from the horn. X knob controls the drive of the horn.

Filter - Add tone-shaping movement to your signal with different modulated filters. Type I is a lowpass filter good for modulated darker tones. Type II is a highpass filter used to creatively modulate your low frequencies. Type III is a bandpass filter forming a sliding "window" of frequencies. Drive the filter frequency with the main LFO or do things like set the depth to zero and turn up the LO-FI envelope control to drive the filter frequency with your playing dynamics.

X knob controls filter resonance, bringing a more aggressive sound to the selected filter.

Tone controls the filter's center frequency or starting frequency where the modulation is applied.

Specs:

The M1 comes in a dark blue finish with red, orange, cream, gold, green, purple and blue ink.
The enclosure's exact size with knobs is 4.9" x 2.52" x 2.64". Power requirements are 9VDC (300mA minimum).
The use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended. Power supply not included.
USB firmware updates can be done via www.walrusaudio.io

Notes: Osc 1 and 3 - Bytebeat oscillators

Generates sound based on equations converted to analog signals , there are sixteen equations selected by Up and Down switches. Four LEDs indicate equation number in binary mode. Three Pots modify numbers used by the equation, A0 , A1 and A2 , fourth pot Sample Rate controls pitch and speed of the oscillation. There's an Output Level pot for the oscillator and a dedicated jack for patching the Oscillator sound to external modules .

Hold toggle switches select between fast decay, long decay and hold mode, for the touch trigger input. There are CV inputs for pitch on these two oscillators

Osc 2 and 4 -Wavetable oscillators

Digital oscillators, touch controlled or gate controlled by gate jacks, pitch is controlled by pitch pot, modulation by LFO A or LFO B and cv inputs.

A0 pot selects waveform, A1 pot morphs between two waveforms.

There are individual output jacks.

LFO 1 and 2

Low frequency oscillator routed to MOD inputs for oscillators 2 and 4, also to modulation input for delay section, selectable by toggle switch , RATE and WAVEFORM shape
pots.

Dimensions
36 HP

Current Draw
200 mA +12V

Notes: Very nice old-school vocoder for Eurorack, featuring a built-in mic pre-amp and full 10-band patch bay. Internal VCO and straightforward control setup help simplify operation.

Supplier's Notes:
The VXC-2220 is an 10-band analogue vocoder with patch-bay for each individual filter section. VXC-2220 vocoder is based on the iconic classics 222 vocoder. For stand alone usage the VXC-2220 is equipped with an internal oscillator generating saw and pulse waves form C1 to C6. A simple and efficient vocoder.

Specifications

Microphone input for speech signal
Line input for speech signal
Line input for carrier signal
Input level control for speech and carrier signal
Output level control
Line output
10-Band analyzer outputs
10-Band synthesizer input
Internal VCO (1 semi-nut step size);
* Saw wave (C1 - C6)
* 3x 10% Pulse wave (C1+C2+C3 - C4+C5+C6 )
* White noise
- Synthesis for 's' and 't' sounds
- Feed-trough level control for speech and carrier channel
- Bypass switch
- 10pin power connector (+/-12V)

Dimensions:
(36HP) 128,5×182.5mm (depth: ca. 35mm incl. power connector)

Power Consumption:
+12V = 125mA
-12V = -125mA

Notes: Part of the analogue MG-X series, the MG16X CV features 16 channels with D-PRE class A preamps, three-band semi-parametric EQ and high-quality SPX digital effects. Solid value.

Supplier's Notes:
MG-X are an addition to the MG Mixer line up. Available in 10, 12 and 16 channel versions, this variant of MG Mixer features our acclaimed SPX effects, without the USB option featured on the XU model - perfect for all scenarios where USB streaming is not needed. The quality and features of the MG mixers series is of course retained, whilst the new models are presented in a fresh black/grey finish.

Road Tough. Studio Ready.

For more than a century, Yamaha has been building a legacy of superior craftsmanship and innovation exemplified in all of their products, from an unrivalled catalog of world-class musical instruments to touring-grade professional audio. Now in its third incarnation, the MG Series embodies this pursuit of design excellence, and incorporates some of the same technologies developed for use in high-end professional consoles, including studio-quality preamps, powerful digital processing, and a rugged, reliable construction.

With an intuitive, easy-to-use interface, the MG Series boasts an extensive lineup of compact mixing consoles with models ranging from six to twenty channels, suitable for a diverse range of users and applications. For installed, recording, or live music settings, the solid construction and flexible design of these consoles lets you shape your sound with confidence, continually delivering peak performance and a level of sound quality and reliability unrivalled in its class.

As same as XU models, X models have SPX effects. Not to mention live session, but also installation cases like conference rooms, banquet halls and weddings, users can have wide range of use. Stylish grey colour models enhance your performance.

Specifications

Mixing capability

On-board processors - SPX algorithm: 24 programs, PARAMETER control:1, FOOT SW:1 (FX RTN CH on/off)
I/O
Phantom power: +48 V
Digital I/O: N/A

Input Channels

Mono[MIC/LINE]: 8
Mono/Stereo[MIC/LINE]: 2
Stereo[LINE]: 2
Output Channels
STEREO OUT: 2
MONITOR OUT: 1
PHONES: 1
AUX SEND: 4
GROUP OUT: 4
Bus - Stereo: 1, GROUP: 4, AUX: 4 (incl. FX)

Input Channel Function

PAD: 26 dB (Mono)
HPF: 80 Hz, 12 dB/oct (Mono/Stereo: MIC only)
COMP: 1-knob compressor (Gain/Threshold/Ratio) Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB Attack time: approx. 25 msec, Release time: approx. 300 msec
EQ HIGH: Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving
EQ MID: Gain: Gain: +15 dB/-15 dB, Frequency: Mono 250 Hz - 5 kHz peaking, Stereo 2.5 kHz peaking
EQ LOW: Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving
PEAK LED: LED turns on when post EQ signal reaches 3 dB below clipping
Level Meter: 2x12 -segment LED meter [PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30 dB]

General

Total harmonic distortion: 03 % @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.005 % @ +24dBu (1kHz), GAIN knob: Min
Frequency response: +0.5 dB/-1.5 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min
Hum & noise level
Equivalent input noise: -128 dBu (Mono Input Channel, Rs: 150?, GAIN knob: Max)
Residual output noise: -102 dBu (STEREO OUT, STEREO master fader: Min)
Crosstalk: -78 dB
Power requirements: AC 100 - 240 V, 50 / 60 Hz
Power consumption: 22 W

Dimensions

W: 308 mm (12.1"), H: 118 mm (4.6"), D: 422 mm (16.6")
Net weight: 2 kg (9.3 lbs.)
Accessories: Included Accessory: Owner's Manual, Technical Specifications, AC power cord, Cubase AI Download Information, Optional Accessory: Rack-mount kit RK-MG12, Foot Switch FC5
Others: Operating Temperature: 0 to +40C

Notes: Kraken is a physical modelling snare drum with a wide range of sounds.

With 32 different shell models, nose algorithms and different distortion types as well as a pitch shifter, the snare sound can be customized as desired.

The additional CV inputs (velocity, accent, decay) can be used in conjunction with a sequencer or other modulation sources to create realistic drum patterns. With the optional pitch shifter at the output, reminiscent of old smapler and pitch shifter pedals, the tonal possibilities can be expanded even further.

Features:

Integrated distortion
Digital and analogue noise sources
Pitch shifter
100% digital synthesis, no samples
Great variety of sounds
Two trigger inputs, which produce a realistic "rimshot" sound when used simultaneously

Power consumption: 61mA at +12V and 17mA at -12V

Depth: 38mm

HP : 8

Notes: A typically comprehensive approach to noise sources from Befaco, featuring five different circuits plus two analogue multimode filters and plenty of CV controls for sculpting the output.

Supplier's Notes:
Noise plethora has three different noise generators:

The first two are identical and are composed of digital algorithms followed by a 12dB analog multimode filter.
Each program has two variables (Named X and Y) addressed by two manual controls and two associated control voltage INs.
Ships with an extensive (and expanding) algorithms library: textures, wave clusters, harsh noises, and glitches.

Generator C has three simultaneous outputs:

White. Flat Response Classic white noise.
Gritty. Granulous texture noise, with voltage-controlled grit quantity.
Filtered. Is the White or Gritty noise followed by a 24dB multimode VCF.

A total of 5 different noise sources in one module!

Dimensions:

14 HP
25 mm deep

Current Draw
110 mA +12V
67 mA -12V
0 mA 5V

Notes: Module A-126-2 is a fully analog frequency shifter for audio signals. A frequency shifter is an audio processing unit that shifts each frequency of the incoming audio signal by the same frequency. If the shifting frequency is e.g. 200Hz an incoming audio frequency of 1000 Hz becomes 1200 Hz, 2000Hz becomes 2200 Hz, 3000 Hz becomes 3200 Hz and so on. Pay attention that this is different from pitch shifting where all frequencies are shifted proportional (e.g. 1000>1200Hz, 2000>2400Hz, 3000>3600Hz) !
The frequency range of the internal quadrature VCO is about 8 octaves (about 20Hz ... 5kHz). If required an external quadrature VCO can be used.

The module is equipped with these controls, inputs and outputs:

Frequ. 1: first manual control of the shifting frequency (factory setting: coarse, range about 20Hz - 5 kHz)

Frequ. 2: second manual control of the shifting frequency (factory setting: fine)

by means of internal jumpers the sensitivity of Frequ.1 and 2 can be swapped (i.e. Frequ.1 = fine and Frequ.2 = coarse)

the relation between coarse and fine control is about 25:1 (corresponding to about 8 octaves to 1/3 octave)

FCV In (socket) and FCV (small control without knob): control voltage input with attenuator for the external voltage control of the shifting frequency

Mix: manual control of the up/down shift panning unit, fully CCW = down shift, fully CW = up shift, in between a mixture of down and up

Mix CV In (socket) and Mix CV (small control without knob): control voltage input with attenuator for the mixing unit for external voltage control of the up/down mixing

Audio In (socket), Level (small control without knob) and Overload (LED): audio input with attenuator, typ. audio in level = 1Vpp, the level control has to be adjusted so that the overload LED just begins to light up a bit, when the LED is fully on clipping/distortion occurs, when the LED is permanently off the input level is too low and the signal-to-noise ratio increases

Audio Out (socket): audio output of the frequency shifter

Squelch (small control without knob): controls the squelch function: fully CCW (Env.) the output VCA is controlled by the envelope signal, which is derived from the audio input signal, fully CW (open) the output VCA is permanently open (no squelch function), in between the squelch intensity can be adjusted

Quadrature VCO Outputs (sockets Sin and Cos): outputs of the internal quadrature oscillator, about 12Vpp level (+6V/-6V)

Ext. Inputs Sin and Cos (sockets): required when an external quadrature VCO (e.g. A-143-9 with a wider frequency range or A-110-4 with thru zero feature or A-110-6 with different waveforms) is used instead of the internal quadrature VCO, the levels of the external VCO should be about 10Vpp (8...10Vpp are OK) and the signals have to be symmetrical around zero Volts, the sockets are normalled to the internal quadrature VCO (i.e. the sockets are equipped with switching contacts that interrupt the internal connection as soon as a plug inserted)

VCA ext. CV (socket): used when an external control voltage (e.g. from an envelope generator) should be used to control the output VCA instead of the internal squelch unit, the socket is normalled to the output of the squelch control (i.e. the socket is equipped with a switching contact that interrupts the internal squelch connection as soon as a plug inserted). From about +8V external control voltage the VCA is fully open.

Internal terminals (pin headers, e.g. for a DIY breakout module):

envelope follower output

dome filter output 1

dome filter output 2

ring modulator 1 output

ring modulator 2 output

Up shift output

Down shift output

Notes: 'Vintage' black panel version of Doepfer's updated frequency shifter module, offering weird and wonderful effects by shifting all frequencies by a fixed amount. Unique sound, not to be confused with pitch shifting.

Supplier's Notes:
Module A-126-2 is a fully analog frequency shifter for audio signals. A frequency shifter is an audio processing unit that shifts each frequency of the incoming audio signal by the same frequency. If the shifting frequency is e.g. 200Hz an incoming audio frequency of 1000 Hz becomes 1200 Hz, 2000Hz becomes 2200 Hz, 3000 Hz becomes 3200 Hz and so on. Pay attention that this is different from pitch shifting where all frequencies are shifted proportional (e.g. 1000>1200Hz, 2000>2400Hz, 3000>3600Hz) !
The frequency range of the internal quadrature VCO is about 8 octaves (about 20Hz ... 5kHz). If required an external quadrature VCO can be used.

The module is equipped with these controls, inputs and outputs:

Frequ. 1: first manual control of the shifting frequency (factory setting: coarse, range about 20Hz - 5 kHz)

Frequ. 2: second manual control of the shifting frequency (factory setting: fine)

by means of internal jumpers the sensitivity of Frequ.1 and 2 can be swapped (i.e. Frequ.1 = fine and Frequ.2 = coarse)

the relation between coarse and fine control is about 25:1 (corresponding to about 8 octaves to 1/3 octave)

FCV In (socket) and FCV (small control without knob): control voltage input with attenuator for the external voltage control of the shifting frequency

Mix: manual control of the up/down shift panning unit, fully CCW = down shift, fully CW = up shift, in between a mixture of down and up

Mix CV In (socket) and Mix CV (small control without knob): control voltage input with attenuator for the mixing unit for external voltage control of the up/down mixing

Audio In (socket), Level (small control without knob) and Overload (LED): audio input with attenuator, typ. audio in level = 1Vpp, the level control has to be adjusted so that the overload LED just begins to light up a bit, when the LED is fully on clipping/distortion occurs, when the LED is permanently off the input level is too low and the signal-to-noise ratio increases

Audio Out (socket): audio output of the frequency shifter

Squelch (small control without knob): controls the squelch function: fully CCW (Env.) the output VCA is controlled by the envelope signal, which is derived from the audio input signal, fully CW (open) the output VCA is permanently open (no squelch function), in between the squelch intensity can be adjusted

Quadrature VCO Outputs (sockets Sin and Cos): outputs of the internal quadrature oscillator, about 12Vpp level (+6V/-6V)

Ext. Inputs Sin and Cos (sockets): required when an external quadrature VCO (e.g. A-143-9 with a wider frequency range or A-110-4 with thru zero feature or A-110-6 with different waveforms) is used instead of the internal quadrature VCO, the levels of the external VCO should be about 10Vpp (8...10Vpp are OK) and the signals have to be symmetrical around zero Volts, the sockets are normalled to the internal quadrature VCO (i.e. the sockets are equipped with switching contacts that interrupt the internal connection as soon as a plug inserted)

VCA ext. CV (socket): used when an external control voltage (e.g. from an envelope generator) should be used to control the output VCA instead of the internal squelch unit, the socket is normalled to the output of the squelch control (i.e. the socket is equipped with a switching contact that interrupts the internal squelch connection as soon as a plug inserted). From about +8V external control voltage the VCA is fully open.

Internal terminals (pin headers, e.g. for a DIY breakout module):

envelope follower output

dome filter output 1

dome filter output 2

ring modulator 1 output

ring modulator 2 output

Up shift output

Down shift output

Notes: A fresh take on granular processing with this stereo DSP module. Grain delay, texturising and freezing with plenty of hands-on control and modulation via CV, gates and triggers. Versatile.

Supplier's Notes:
Melotus Versio is a stereo texturizer that uses granular processing to transform and reshape sound.

Designed to be played by hand or manipulated within a patch, Melotus is everything from a grain delay to a completely transformative texturizer with grain control and manipulation of triggering, direction, and randomness.

Filter audio with a lowpass/highpass combo filter that adds haunting shimmers and subharmonics. Freeze grains by hand or with triggers and gates, or clock them to create rhythmic effects.

Plus, Melotus Versio is part of the Versio DSP platform: transform it into a completely different effect by loading a growing number of alternate firmwares, completely free - or develop your own firmware with our open-source documentation.

Notes: From one of the most iconic names in modular synthesis, the Variable Bandwidth Filter is a unique design, combining two state-variable VCFs with extensive CV control for clean, versatile filtering.

Supplier's Notes:
The Serge Variable Bandwidth Filter (VCF2) is probably the rarest classic filter in the Serge system, offering a unique combination of 2 filters. According to the 1983 Serge catalogue, the Variable Bandwidth VCF (VCF2) "has a band-pass output which can be varied manually or with voltage control. This is a standard response synthesizer VCF, typical to filters used in many studio systems. In the VCF2, two state-variable VCF's are connected in series to produce a total of five outputs. High pass, low pass, two fixed bandwidth outputs, and one variable bandwidth output are available. The outputs are all flat-response (no resonance) so the VCF2 is suitable for processing concrete sounds without introducing resonant coloration to the timbres. Under voltage or manual control, cut-off frequency of the high and low-pass outputs are affected, as well as the center frequency of the two band-pass outputs. Both center frequency and bandwidth are independently controllable on the variable bandwidth output."

Now - for the first time, designed and licenced by Serge - the VCF2 is available as a eurorack module. A new switch has been added which determines if the CV-controls are routed to the first (left), second (right) or both filters, bringing even more sonic options than the original.

Some details of the Random Source Serge VCF2 module:

Original Serge design, under licence and in cooperation with Serge Tcherepnin
Uses for High-end VCAs
Eurorack format (3U), 20 hp
Power consumption: 45mA @ +12V, 45mA @ -12V
Module depth: < 30mm (1.2")

Notes: ALM Eurorack cases are available in a range of sizes all including an integrated powered bus boards.

The cases all feature anodised aluminium construction, an on/off switch, rubber feet, and high quality switched powered bus boards with numerous keyed headers and ample power capacity.

These are simple and compact Eurorack cases, perfect for small, focused systems, taking along on travels, or as a tabletop addition to a larger setup.

Cases are available in 4 sizes; 3U 84HP / 6U 84HP / 3U 52HP / 6U 52HP sizes. They all offer 1 Amp on both the -12V and +12V rails per row.

Great modern cases

The ALM powered Eurorack case was originally designed for the System Coupe. Wider interest has seen it evolve into a range of different sized cases being made available by themselves.

A fixed solid bus board provides quality ample power and plentiful keyed power connectors. The shielded DC/DC power converter is low noise and includes overload and short circuit protection. Fixed, quality mounting rails are used over sometimes frustrating sliding nuts. The case has a great looking all anodised aluminium construction that is both strong and light.

The case proportions are designed to look great on a table or desk (not too deep, just enough) and also be easy to fit in a bag and transport.

Decksaver case covers are available currently for the 3U/84HP, 6U/52HP, and 6U/84HP cases.

6U / 52 HP

Provides up to 1 Amp power on each -12V & +12V rails.
Connections for up to 9 modules on busboard, with additional 'flying bus board' included that adds up to 12 connectors.
Includes 2 Amp power 'brick'

Notes: Create without boundaries.

Record, produce, compose, mix, master, and perform-all from a single, intuitive application. Only Studio Oner 5 provides integrated tools that take you from initial inspiration to mastered production, from full-length album to setlist on stage. The standard for end-to-end production, Studio One is the DAW that does it all.

Drag-and-drop everything.

Studio One pioneered the often-imitated drag-and-drop workflow that continues to be a guiding principle in Presonus' design philosophy. Audioloops, virtual instruments, plug-in effects, and even presets can all be dragged into your session from Studio One's innovative Browser. Copy FX Chains from one channel to another simply by dragging-and-dropping. Convert MIDI to audio or audio to MIDI using drag-and-drop. Upload and download files to and from your PreSonus Sphere Workspaces by drag-and-drop. Ease of use is at the heart of Studio One, so your mind stays focused on your inspiration.

Perfect harmony.

The only DAW with Harmonic Editing for both audio and MIDI, Studio Oner 5 offers Chord Track, a songwriter's dream come true. Create, audition, and change chord progressions and even have older parts follow a newer, better chord structure, thanks to the inspiration Harmonic Editing can provide. With version 5.3, you can now drag chords from the Chord Track to an Instrument Track to begin composing right away. Chord notes can even be extracted directly from audio by detecting chords and then dragging the audio event to an Instrument Track.

Inspiring plug-ins.

With a complete suite of effects plug-ins, Studio Oner 5 supercharges your mixing. These plug-ins are so good we've made a few available for use in any DAW by popular demand. From State Space Modeled guitar amps to lush reverbs and polyrhythmic delays, Studio One has all the plug-ins you need to mix and produce. Studio One Professional's unique Pipeline XT plug-in lets you use boutique and vintage analogue signal processors as easily as software plug-ins. Studio One's powerful Splitter plug-in lets you run multiple plug-ins in parallel on a single channel.

Analogue mixing with digital ease.

The proprietary Mix Engine FX plug-ins provide State Space Models of classic analogue consoles that can process your mix across channels on any bus, collectively. This isn't a stereo bus plug-in, this is multi-source processing that re-creates true analogue circuit behaviour like console input-gain saturation, analogue noise, and crosstalk-all painstakingly modelled component by component from real-world hardware.

Produce without limits.

Forget laborious transposition, cutting, pasting, and moving when arranging. Audition new arrangement ideas on the fly with a simple click of your mouse. Use Scratch Pads to test arrangements. The flexible Arranger Track makes moving sections of Songs as easy as moving Parts. Powerful comping tools make assembling a perfect take simple, efficient, and fun. A robust suite of tools ranging from transient detection to multiple slicing and time-stretching features makes editing multitrack drums blazingly fast. And with groundbreaking Harmonic Editing-the most flexible implementation ever-no other program can approach the ease of arranging and songwriting that Studio One 5 delivers.

Edit audio and MIDI- fast.

Clip Gain Envelopes let you polish performances or remove glitches with adding a plug-in to your effects chain. Convert audio to MIDI and MIDI to audio with a simple drag-and-drop for blazing fast sample replacement. Replace drum sounds with samples simply by dragging the source track to an Impact XT track. The combined Arrow and Range Tools boost your audio editing efficiency by merging the most frequently used tools into one. Select, move, split, or duplicate Events; trim start and end points of Events; adjust fades; and change the overall Event level in one seamless action.

A sound as unique as you.

Inspiring virtual instruments and unique Multi Instruments let you combine instruments to create your own unique library of sounds. You'll create beats faster than ever with Impact XT, our comprehensive rhythm-production environment. Build your own sampled instrument with Sample One XT. From polyphonic analogue to monophonic subtractive synthesis, Studio One has the sounds that make you want to create. Presence XT can be expanded with Add-on packs like Deep Flight One and PreSonus Studio Grand. Aux Channels let you easily use your hardware synths, drum machines, and groove boxes as part of your productions, so dust off that TX81Z or Portastudio and put them back to work! However you create, Studio One has a tool that makes the job easy.

Notes: Deluxe version of the impressive iRig Pro Quattro features the same high-quality portable interface with the added bonus of a full complement of accessories, including mics and travel case.

Supplier's Notes:
***Note: This version of the iRig Pro Quattro I/O comes with 2 x Mic XY stereo microphones, foam windscreen, and a carry case. ***

Go pro all the way

For a little more, you get a lot with the iRig Pro Quattro I/O Deluxe edition. The value of the iRig XY stereo mic capsules alone is worth the upgrade. In addition to the pair of mics you'll get the optional power supply, which you can also use to keep your iOS device charged during extended sessions. Plus you'll get a custom carrying case to protect and transport your Quattro I/O and XY mics wherever your field work takes you.

Pro recording and performing, in the palm of your hand

iRig Pro Quattro I/O is a professional-quality 4 in / 2 out portable audio and MIDI interface packed with everything needed for field recording and content creation, for serious sound and flexibility - anywhere.

Small enough to fit in the palm of your hand, the iRig Pro Quattro I/O still packs in four high-quality, low-noise mic preamps; instrument, RCA and TRS inputs; plus XLR balanced, 3.5mm stereo and headphone outputs - and full MIDI I/O!

iRig Pro Quattro I/O works right out of the box with iPhone, iPad, Android, Mac and PC, but can also serve as a stand-alone mic preamp or line mixer, with a built-in limiter and direct monitoring so you're always guaranteed the perfect take.

Packed with a swiss-army-knife's worth of tools, iRig Pro Quattro I/O ensures you're ready for anything, anywhere.

As a mobile interface

Connected to a computer or mobile device, the iRig Pro Quattro I/O will work as a high-quality, multi-channel audio and MIDI interface with a full array of inputs and outputs so you'll always be prepared for any recording or need. Fully MFi-certified, no adaptors are required for iPhone or iPad for reliable field performance on any device.

As a broadcast / podcast interface

Enable STEREO mode and iRig Pro Quattro I/O mixes all sources down to stereo for streaming or recording. Monitoring is easy thanks to a dedicated headphone output with independent volume control and direct monitoring. Or use MONO mode for streaming to social media; Loopback lets you duet your favourite videos easily.

As a field recording interface

With an onboard microphone and optional stereo mic capsules, iRig Pro Quattro I/O turns your iPhone, iPad, Android device into a full-featured, professional field recorder.

As a stand-alone mixer

iRig Pro Quattro I/O also works as a preamp and mixer: just power it via battery, USB or DC IN and use the full set of inputs/outputs to capture and mix multiple sources to your DSLR camera with professional quality.

Always perfect recordings with the safety backup channels

In STEREO and MONO mode, inputs 3 and 4 can be used as safety channels: recording the same signal as input 1 and 2 but reduced by 12dB as a backup in case the sound source unexpectedly overloads the main channels.

Audio quality without compromise... wherever you are

Up to 24-bit, 96 kHz sample rate Ultra-low-noise mic preamps with full +48v phantom power Professional-quality, transparent A/D and D/A conversion Built-in limiter, for input 1-2, to protect against clipping Multitrack, stereo or mono internal mixdown.

Dimensions

Size: 160mm/6.29" x 90mm/3.54" x 40mm/1.57"
Weight: 340g/11.99oz (without batteries)
Cable length: 60cm/23.62"

Box contents

iRig Pro Quattro I/O
1/4" thread adapter
4x AA Batteries (alkaline)
iOS Lightning to mini-DIN cable
USB-A to mini-DIN cable
2.5mm jack to MIDI female adapter
2 iRig MIC XY stereo microphones
Windscreen
9V PSU
Travel case

Notes: Excellent value from this unique dual analogue oscillator, heavily based around the concept of 3D morphing using touch-sensitive control strips. Deep modulation options and stable TZFM add up to impressively deep sound design.

Supplier's Notes:
Norand unveils Morphos, a morphing dual analogue oscillators packed with creative features.

3D Morphing

Morphos' preset strips are groups of four specially developed FSR sensors that can precisely detect vertical, horizontal and pressure information from the pressure distribution of your finger. 3D morphing allows you to create entirely new soundscapes by morphing between multiple user presets, in three different dimensions. All at the reach of your fingertips, it opens up a whole new world for live jamming!

The Synthesis

The two all-analogue, digitally controlled Oscillators provide very pure harmonics, 4 waveform types on a continuously variable potentiometer and extremely stable TZFM (Through Zero Frequency Modulation). Thanks to its digital brain, an active calibration system allows it to track over 10 octaves, even at high TZFM ratio.

Contextual Modulation

Morphos inherits Norand Mono's Contextual Modulation technology, adapted for the modular world. It is possible to modulate every parameter under CV. The module provides 3 Modulation Modes - Attenuverter, Modulator and Ping Envelope - allowing you to modulate timbre and create drum sounds.

Technical Specifications

Synth Voice Features

Fully analogue signal path 2x analogue oscillators Continuously variable waveform Thru-zero frequency modulation Hard-sync

Modulation Features
Controls: 8x dedicated ping envelopes 8x dedicated modulator
Modulator: 4 waveforms Type settings : Free/Synced/Audio-Rate Audio-Rate anti-aliased, quantized to OSC1 Free from 0.1 to 80 seconds
Envelope: Decay segment from 10us to 20s

Memory Storage: 4 banks 3 layers per bank 4 presets per layer
Outputs
Eurorack level audio outputs: Output level: 10Vpp maximum Output impedance: 1000 Ohm
CV outputs: Voltage range: -5V/+5V 1V/oct resolution : 3 cents of a semitone
Electrical Specification: +12V: 460mA -12V: 90mA +5V: 0mA

Physical Specifications
Width: 28HP
Height: 3U
Depth: 25mm

Warranty: 2-year Norand warranty

Notes: Collabing with YouTube sensation Andrew Huang, Endorphin.es offer up this impressive multipurpose processor module. Building blocks of stereo filtering, compression, reverb and more offer huge creative potential.

Supplier's Notes:
In collaboration with Andrew Huang, based on his modern music production techniques, Endorphin.es developed a creative audio processor with multiple blocks that can be moved around in order to achieve different flavours for sound design.

Processing unit without fixed structure: intuitively create astonishing and ephemeral timbres, from atmospheric rumbles to heavy or distorted textures.
Creative stereo effect processor with delay, reverb, filter and distortion with quickly explorable routing chain with single button press.
New generation ARM Cortex - M7 processor with 96 kHz 32 bit internal processing.
Lush hall and whooshing reverse reverbs with audio freeze and pre-delay.
Sidechain audio ducking envelope available both internally and externally with additional one knob single band compressor.
Tap delay with maximum delay time up to 2.5 seconds, external clock input with onboard clock divider and 1v/oct time control.
8x oversampled distortion algorithm.
Pre- and post - VCA, tone and volume controls with extra gain.

Power consumption
135 mA +12V
35 mA -12V
0 mA 5V

Dimensions
16 HP
26 mm deep with power ribbon cable connected.

Notes: The Z8000 Matrix Sequencer is a modulation source like no other: The 16 knobs of the Z8000 are accessed by ten sequencers with their own clock, direction and reset inputs. The ten sequencers are as follows:

Four 4 step CV sequencers on the horizontal.
Four 4 step CV sequencers on the vertical.
One 16 step CV sequencer on the horizontal.
One 16 step CV sequencer on the vertical.

The Z8000 can simultaneously modulate up to 10 CV parameters poly-rhythmically, with unprecedented motion complexity. One knob affects all 10 CV outputs! Imagine modifying 10 parameters from one knob. With its 30 gate and clock inputs and 10 CV outputs one can only imagine the possibilities, and all clock inputs can even be driven at audio rates! The Z8000 pairs well with the Trigger Riot and Circadian Rhythms and using it with the QuantiZer extends its capabilities as a high-precision 1V/Oct note sequencer.

Introduced in 2017, a new version of the Z8000 maintains the original circuitry but adds output range adjustment switches on the back and Tiptop's new colored look, which helps highlight the sections, on the front.

Size: 28HP
Depth: 15mm
Power: +12V 70ma / -12V 10ma

Notes: Creative little desktop noise synth based on some unique ideas. Generate tones with conventional oscillator, noise source and oscillating delay feedback, then mix it all through a final delay.

Supplier's Notes:
Synamodecs Levitate is a desktop synthesizer that is made for noise and experimental music making.

It's divided into three blocks Legus, Neura and Nxpctd. Legus consists of two delays in series. Those delays offer time, level, feedback and dry/wet parameters. Due to it's layout it is capable of generating sounds without any input signals. The ouput of the first delay can modulate the delay time of both or just the other one. The Neura section is a sound and noise generator with frequency, texture and waveform controls and outputs on two different independent outputs. Last but not least the NXPCTD block is a third delay through which the Legus ad Neura pass through. It gives control over dry/wet, time and feedback control.

Additionally the Levitate offers an external audio input for extra fun.

All in all a fun little box for weird and crazy sound exploration. Dc power adapter included.

Dimensions: 20 × 30 × 10 cm

Notes: Compact but premium 2x4 audio interface from one of the best brands in the business. Superb sound quality with built-in hardware DSP.

Supplier's Notes:
Legendary Sound Quality, Total Portability and Hardware DSP all Come Together in a Beautiful New Design

In 2007, the original Apogee Duet shattered the expectations of what a home studio interface could be. Professional, personal and portable, Duet revolutionised independent recording and empowered musicians, producers and engineers with legendary Apogee sound quality, elegant design and effortless ease of use. Now, the all-new Duet 3 brings next-generation Apogee performance and features to a beautiful ultra-low profile scratch resistant glass and aluminium case.

Duet 3 includes on-board hardware DSP that works with the Symphony ECS Channel Strip* for zero-latency recording with FX. Tuned by Bob Clearmountain, the ECS Channel Strip includes presets custom crafted by the legendary mixer so you can dial in a pro recording sound instantly. Ideal for music creation, voice recording, streaming and even gaming, you can use Duet 3 with your Mac or Windows workstation in your studio or on the go. Take your Duet 3 to the next level with the sleek Duet Dock* accessory for the ultimate ergonomic desktop experience.

Achieving superior sound quality in a digital audio interface requires experienced engineering that artfully orchestrates AD/DA converters, digital clocking, analog circuitry and power management technology to achieve a harmonious blend of carefully selected components and thoughtful design. Duet is the result of decades of innovation and expertise and delivers sound quality unmatched in its class.

Legendary AD/DA Converters

With two inputs and four outputs of legendary Apogee AD/DA conversion, plus two world-class preamps, Duet is the perfect partner for your home and mobile studio. Connect microphones, guitars, keyboard and line level devices to capture every detail. Monitor and mix with the full depth and dimension of your sound through two truly-balanced, line-level analog outputs for speakers. And, power your headphones with a zero-ohm headphone output for a dedicated headphone mix.

World Class Preamps

One of the most critical components for high quality recording is your preamp and the pres in Apogee Duet are world-class. With up to 60dB of gain and 48v phantom power, you can cleanly and precisely capture any audio source with even the most demanding microphones. Meticulous Apogee engineering, keeps noise and distortion down, even as you crank up the gain.

Plug-in to On-board DSP

To capture your best performance, you need to dial in an inspiring sound quickly and easily. And few things are more distracting than latency when trying to record. Duet gives you on-board hardware DSP for FX processing with the Symphony ECS Channel Strip (sold separately) to precisely shape your tone on input and give you great sounding tracks, all while eliminating the delay that can occur while recording. The Symphony ECS Channel Strip, tuned by legendary mixer Bob Clearmountain, includes EQ, Compression and Saturation controls that let you create the optimal blend of channel FX for tracking vocals or acoustic instruments. Choose from multiple hand crafted Clearmountain presets and record with zero latency through Duet's on-board hardware DSP.

Receive 50% off the Symphony ECS Channel Strip from your Apogee dealer when you purchase Duet 3 or when you register on the Apogee website.

The all new Apogee Control 2 software gives you complete control of all Duet functions and features including the Symphony ECS Channel Strip FX running on Duet's hardware DSP. Apogee Control 2 is shared across all current and select previous generation Apogee products and will enable Apogee support and engineering to quickly react to future macOS and Windows OS updates helping to ensure Duet 3 compatibility for your workstation.

Sound quality comes first, but elegant design is a close second. After all, you're always hands-on, controlling listening level and mic pre gain, so why shouldn't the centerpiece of your studio have a high-end look and feel? The Duet multi-function digital controller knob delivers a luxurious-feel for dialing in monitor levels and mic pre gain, while also giving the desktop interface style accents backlit with purple LEDs. Perfectly contoured for ergonomic control on your desktop, the low profile body is topped with scratch-resistant cover glass for a modern look and solid feel.

Duet Dock

Duet set the standard for making music and recording on the go with its small footprint and flexible breakout cable. But when working in your studio, the best way to use Duet 3 is with the all-new Duet Dock*. The Dock positions Duet at the ideal angle for quick adjustments and meter and function visibility. The rear panel connectors on Duet Dock make it easier to organize and connect your cables to Duet too.

*Sold Separately