搜索结果

Notes: The module is built around high quality VCA chips from THAT Corp, as well as low noise opamps. It offers clickless muting and equal loudness panning. The distinct feature is that voltage control is dynamically compressed should it yield clipping when pushed too hard. Also, in both modes the attenuators offer full closing of the corresponding channel, regardless of being controlled by the CV, or not. The VCAs fully open (0dB gain) at CV=8V in Env mode and CV=5V in LFO mode. All the input and output signal levels are Eurorack levels.

Multiple Praga units can be chained thanks to dedicated headers on the back. The mixed stereo sum of each unit in the chain is added to the mixing bus of all units downstream.

A dedicated Hrad expander will offer master volume control, gate inputs for channels muting/unmuting, headphone amplifier, and voltage control over aux sends.

Notes: Well on its way to becoming a cult favourite already, Empress's Zoia brings modular synthesis to a compact pedal format. Create effects, synths, controllers or modules to integrate with other instruments.

Supplier's Notes:

The ZOIA is basically a modular synthesizer in pedal form. Instead of being a delay effect or tremolo, the ZOIA provides the modules necessary to build a delay or tremolo from the ground up. But since you're the one building it, you can make it do whatever you want. With the ZOIA you can build your own custom effects, synthesizers, midi controllers, and virtual pedal boards. And to make life a little easier, these modules have been created for all your standard guitar effects. So for instance, if you want a phaser, you can just plop down a phaser. You don't have to break out the textbooks to learn that they're built out of all-pass filters. (Of course, if you're a nerd like us, you can use the ZOIA to build them out of all-pass filters).

Input Impedance: >= 1M ohms
Output Impedance: 100 ohms
Frequency Response (-3dB): 10Hz - 23.4kHz
Total Harmonic Distortion: 0.22%
Dynamic Range: 105.5 dBA
Input Headroom (no pad): +0.5 dBu
Input Headroom (6dB pad): +5.7 dBu
Input Headroom (12dB pad): +10.8 dBu
Output Headroom: +16.2dBu
Power Input Connector: 2.1mm Barrel Connector
Power Input Voltage: 9V DC (center negative)
Required Current: 300mA
Height (enclosure only): 1.75"
Height (including controls): 2.625"
Length: 5.7"
Width: 3.75"
Weight: 1.5lbs

Notes: The Pro VLA II is a tube driven Vactrol-based compressor/leveling amplifier designed to excel in any professional audio environment. Superior performance and an incredible tone makes the Pro VLA II and indispensable tool for tracking, mixing, mastering, dynamic control of live sound sources or for use in broadcast audio.

Capable of delivering a far more musical natural sounding and sonically transparent compression than competitive units in its class, the Pro VLA II uses an Opto-electronic circuit rather than the more typical design VCA driven level detection circuit. This VCA-less design coupled with a 12AT7 vacuum tube in the gain stage makes the Pro-VLA II the ideal dynamic control device for critical audio applications.

Exceptional signal integrity with extremely low noise and low distortion is achieved in the Pro VLA II by utilizing a transformerless design throughout.

Unlike typical compression units that use Voltage Controlled Amplifiers (VCA's) to handle level detection, the Pro VLA II's Opto-electronic design allows a far more transparent and musical sounding compression without sounding aggressive or un-natural. This Vactrol based optical electronic circuitry is the basic component of the classic highly sought after compressors of past.

The Vactrol design allows the Pro VLA II to react to audio signal in much the same way the eye naturally adjusts to fluctuations in light levels, smoothly, quietly and almost imperceptibly.

The Pro VLA II is a soft knee leveling amplifier by design. Although capable of providing dramatic compression effects, the Pro VLA II was designed to excel in any application where transparent, expressively musical dynamics control is desired.

Large highly visible backlit analog VU meters accurately display input and output levels while extremely fast 10-segment LED's display gain reduction. For added functionality, the LED's display either average level for mastering & mixing applications or peak hold for monitoring individual sources when tracking audio.

XLR and 1/4" TRS balanced inputs and outputs are provided to ensure the Pro VLA II can connect with any audio source or hardware. A +4 dBu/-10 dBu mode switch optimizes the Pro VLA II I/O for either consumer or professional equipment.

Notes: Loquelic Iteritas is a digital VCO with interpretations of three classic synthesis algorithms involving dual pitch control. It creates a huge variety of sounds parameterized by four tone and two pitch controls.

It has had glowing reviews from Surgeon and Surachai, and I am personally very excited about this module!

It has a simple interface, with 3 different synthesis algorithms allied to a number of different controls / CV inputs which have different effects, depending on which mode you choose. Simply hook up a number of modulation sources to the 4 inputs and start wiggling!

Rev.2 now features an additional sync input.

Size: 10HP Eurorack
Depth: 1.5 Inches
Power: 2x8 Eurorack
Draw +12V: 150 / 80
Draw -12: 5 / 5
Draw +5v: 0 / 90

Notes: Any signal can be expressed in terms of a few parameters: frequency, phase, amplitude and timbre. It is through modulation of these aspects that synthesists create electronic sound. With Generate 3, it is now possible to create a signal and control all its parameters by through-zero modulation within a single 12 HP wide module.

Everything starts with the exceptionally precise triangle-core voltage controlled oscillator (VCO) at the module’s heart. Through-zero linear frequency modulation (FM) enables rich yet pitch-stable FM sounds, by allowing the oscillator to run backwards into ‘negative frequencies’.

The resultant triangle wave is then processed by the through-zero phase modulator, providing a total phase shift range of 900°. Phase modulation offers an interesting alternative for FM, as it enables deep FM-type tones without actually changing the oscillation frequency.

The timbre of a signal is determined by its harmonic content. This full set of harmonics can be grouped into three main parts: the fundamental, even and odd harmonics. Generate 3’s harmonics generator separates out these three timbral ‘channels’. By adjusting their relative amplitudes, a vast array of different waveforms can be created, including but not limited to the classic sine, saw and square waves.

While the amplitudes can be adjusted manually, each timbral channel supports through-zero amplitude modulation, also known as balanced or ring modulation. When audio-frequency modulation signals are applied, the harmonics become ‘split’, enriching the spectrum.

In addition to all the usual analogue synthesis techniques, the extensive set of modulation options makes Generate 3 especially suited for exploring multiphonic synthesis: a monophonic source creating a complex timbre, much like throat singing, yet by electronic means.

Notes: Ten channels, digital effects, USB audio interface plus reliable Allen & Heath build quality. A whole lot of mixer in a compact format.

Supplier's notes:
Hybrid compact mixer / 4×4 USB interface with FX:
ZEDi-10FX combines the robustness and hands-on control of an analogue mixer with a high quality 4 x 4 USB interface and an outstanding multi-model FX unit, making it a perfect all-round choice for musicians, recording artists and venues. Whether it's bouncing ideas around at home, performing live or recording tracks to share on YouTube and Soundcloud, ZEDi-10FX is a versatile companion for every step of the creative journey.

The studio quality, 24-bit / 96kHz, 4×4 USB interface makes it easy to capture stunning multitrack recordings direct from the mixer to a Mac or PC without the need for any extra equipment. Featuring the new GSPre boutique preamp design, developed from the revered GS-R24 studio recording console, the ZED boasts exceptionally low noise and massive headroom, with a signature analogue warmth and depth. ZEDi-10FX includes a specially created suite of studio quality reverbs, delays and special multi-model FX, crafted by Allen & Heath's acclaimed in-house effects aficionados. Guitarists will be pleased to know that two of ZEDi-10FX's mono channels feature Guitar DI high impedance inputs, allowing guitars to be plugged straight into the mixer without the hassle and expense of carrying separate DI boxes.

Mixer + USB interface
ZEDi-10FX offers the best of both worlds, incorporating a studio quality 4 in / 4 out, 24-bit/96kHz USB audio interface for hassle-free multitrack recording and playback to/from a Mac or PC, or to an iOS device using the iOS camera kit. The USB output source can be set up in several different ways to match your workflow.

Cubase LE Music Production Software included:
ZEDi-10FX comes with the acclaimed Cubase LE software. Cubase LE offers powerful yet easy-to-use software tools for audio recording, editing, MIDI sequencing and mixing. Its vast range of proven editing and sequencing tools can be used for a large range of music styles and areas of application. From singers and songwriters recording vocal lines to rock bands jamming in their rehearsal room, Cubase LE is as easy as it gets - with outstanding audio quality as well as time-saving recording and editing functionality.

Cubasis LE Mobile Music Production app:
The mixer also comes bundled with the Cubasis LE app. Cubasis LE is the compact version of Steinberg's streamlined, multitouch sequencer for the iPad, providing the same look and feel of its bigger brother Cubasis. Specially designed for quick and easy operation, Cubasis LE makes recording, editing and mixing a breeze.

ZedFX multi model:
ZEDi-10FX boasts a brand new suite of studio quality reverbs and delays, painstakingly crafted to enhance your recordings and performances. Special multi-model effects provide uniquely dynamic combinations of reverbs and delays.

Exceptional audio quality:
ZEDi-10FX features an exceptional new preamp design, created by analogue guru, Mike Griffin and developed from his highly acclaimed GS-R24 studio recording console. Known as GSPre, the preamps deliver exceptionally low noise and massive headroom, and the warmth and depth that Allen & Heath's analogue range is famous for. For tonal shaping, the precise 3 band MusiQ EQ controls have been carefully calibrated for responsiveness and precision, making it easy to shape and enhance each musical source.

Road tough:
All ZED mixers are designed and built to Allen & Heath's legendary touring grade standards to ensure a long life in the toughest environments. All channels are on individual, vertical circuit boards and all rotary controls are secured to the front panel with a steel nut to guard against impact damage.

Made for guitars:
ZEDi-10FX comes with two Guitar DI high impedance jack inputs, allowing guitars to be plugged straight into the mixer without the need for DI boxes. That's one less piece of gear to buy, carry and set up.

It's an Allen & Heath:
Allen & Heath has been a trusted name in professional audio since 1969. The ZED technology advances, but the commitment to audio excellence and build quality endures.

Notes: Highly sought-after utility tool that always sells out quickly. Full colour display gives visualisation as an oscilloscope, spectral analyser, spectograph, tuner and more. Waveform and clock generator options too.

Supplier's Notes:
The Ultimate Eurorack Utility Module (and a whole lot more!)

The DATA is a digital platform for testing, measurement, and signal generation in Eurorack modular synthesis systems. It is a modular tool kit, with functions applicable to any system and style.

Use the DATA's scope to view the interactions between your control voltages and audio signals, allowing you to master your modules by understanding their voltage ranges, control shapes, and parameter responses. Use the DATA's dual waveform generator to dial in a precisely scaled LFO for CV control, or use the waveform's frequency "note mode" to effortlessly make dyads (two note chords). Use the DATA's clock program as a master clock or to divide or multiply an incoming clock signal, sending four different clock outs to gate modules directly or as control to sequencers.

The possibilities of the DATA are basically unlimited; with the included microSD you can update the DATA's firmware and we can continue to refine and create new programs.

Notes: The definitive MIDI controller keyboard, KeyLab MkII is a luxurious, expressive tool for your studio or live rig. Unsurpassed connectivity, effortless integration, customizable interface, and inspiring included software; there simply is no other MIDI controller quite like KeyLab MkII.

KeyLab MkII is an expressive, versatile, and superbly powerful next-generation USB MIDI controller keyboard. It features dynamic performance and studio controls, including a high quality 49-note keyboard with aftertouch, 16 RGB backlit pads, 9 faders, 9 rotary knobs, and dedicated DAW and transport controls. Its huge connectivity also includes CV/Gate outputs, so you can take command of outboard synth and Eurorack modules with ease. Factor in the amazing included software, and you've just found your ideal creative companion for the studio and stage.

Another level in terms of quality and luxury, KeyLab MkII is a treat for the fingertips and gives unprecedented levels of control over your music and software.

Both 49-key and 61-key versions of KeyLab MkII feature Arturia's Pro-Feel action, the same lusciously playable keybed as the MatrixBrute and MiniBrute 2. Sensitive enough to accurately capture the subtleties and nuances of delicate playing, while still being robust enough to feel the energy of high-impact playing.

Every version of KeyLab MkII also offers 16 RGB-backlit, multi-function performance pads which can be used in a huge variety of ways, whatever suits your performance style or studio needs best. Trigger custom chords, activate samples, quickly switch user maps, KeyLab MkII puts the "control" firmly back into "controller".

A gateway to software, KeyLab MkII features 9 rotary encoders, 9 faders, and a selection of fully assignable buttons to give you unfettered access to your virtual instruments, effects, and recording environment. Send and receive CV/gate data to bridge the gap between modular and MIDI, with a fully customizable setup.

To allow for maximum expression, and to put that unmistakable "human touch" into your music, KeyLab MkII features multiple expression pedal inputs, that can be assigned to whatever parameters you desire in your DAW or virtual instruments, and sports robust, luxurious machined metal pitch and mod wheels. Truly a live-performers dream!

Amazingly versatile, hugely expressive, and geared up to enhance your creativity and workflow wherever your music takes you.

Included is an impressive software bundle: Arturia's complete Piano V virtual piano instrument, Analog Lab 3, and Ableton Live Lite.

Notes: PreSonus Quantum 2626 is the fastest and best-sounding interface on the planet, thanks to the jaw-dropping speed of Thunderbolt 3, 8 front-mounted premium PreSonus XMAX analog mic preamps, and pristine ADA converters.

The PreSonus Quantum Thunderbolt Audio Interface is a 26x32 thunderbolt 2 ultra-low-latency audio interface. The Quantum Thunderbolt Audio Interface includes two combo mic/line/instrument inputs and six combo mic/line inputs, with each mic input featuring a digital-controlled XMAX preamp. The versatile design allows you to daisy-chain multiple units to expand your I/O up to 96 in and out connections. The PreSonus Quantum features a wide range of analog and digital connectivity making it one of the most comprehensive high-end interfaces on the market. The interface also operates up to 192kHz for ultra-high-definition mixing and recording.

With a barely measurable round-trip latency of less than 1 ms*, it's no wonder Sound on Sound magazine dubbed Quantum-series Thunderbolt audio interfaces the "fastest audio interfaces on the planet". Superb high-definition digital conversion and the ultra-transparent analog XMAX mic preamp design mean that your audio will always sound its bestiwhether you're recording with or without your favorite plug-ins engaged in real-time.

Every design decision during Quantum 2626 audio interface's engineering was made with one goal in mind: blazing-fast speed without any sonic compromise. The Quantum-series proprietary Thunderbolt driver was written from the ground up to deliver ultra-low-latency performance while maximizing efficiency. Cutting-edge 24-bit, 192 kHz converters with 115 dB of dynamic range and superior low-jitter clocking- coupled with our ultra-transparent, pure analog XMAX preamps- result in superb audio quality with the lowest round-trip latency of any audio interface available (< 1 ms).

Audiophile-grade digital converters, low-jitter clocking, and transparent preamps add up to a superior recording and listening experience. The Quantum 2626 audio interface operates at up to 192 kHz for ultra-high-definition mixing and recording. High-quality converters on every input and output provide 115 dB of dynamic range to capture complex musical harmonics smoothly and naturally with no audible distortion. And our lauded XMAX Class A analog microphone preamps deliver incredibly high headroom, deep lows, smooth highs, and a rich overall sound so you'll hear every breath, transient, and detail in your recordings.

Impressive speed combined with stunning sound quality means that the Quantum Thunderbolt audio interface is an ideal recording solution for any size of studio. Need more mic preamps? Connect the PreSonus DigiMax DP88 to your Quantum interface's ADAT/dual S/MUX ports. Once synced, the DigiMax DP88 preamps can be remotely controlled via Studio One or UC Surface. Want to insert your favorite gear? The Quantum 2626 features two direct preamp outputs with dedicated returns, so you can insert your favorite analog compressor and your favorite plug-ins with ease.

While compatible with any macOS or Windows recording application, the Quantum 2626 ships as a complete recording studio with Studio One Artist music production software included. Easy to learn, Studio One enables you to compose, record, and produce without getting distracted by the tools. Need a new loop or sample for your latest production? Studio One lets you shop, audition, and purchase new content right from your production environment- including powerful extensions for Studio One like the Presence XT Expansion packs and the PreSonus Channel Strip Collection.

Industry-leading speed and pristine audio quality combined with jaw-dropping expandability are the hallmarks of the Quantum interface design. Record and monitor from your favorite DAW with any plug-in engaged. Insert your favorite outboard analog gear with ease. Regardless of your studio's size, Quantum audio interfaces will streamline your recording process- you'll make better music, faster.

Notes: *** Complimentary warranty on this product for 5 years if purchased from Juno- UK warranty only***

This compact, portable and lightweight audio interface (only 220 g /0.49 lbs) transfers digital audio data in SPDIF and ADAT format to Windows and Mac computers.

The latest Plug and Play technology guarantees a simple installation, even for the inexperienced user. Numerous unique features as well as RME's robust drivers enable a quick, efficient and comfortable operation of the Digiface USB.

The Digiface USB is an extremely compact & portable digital audio interface with 4 optical ADAT / SPDIF I/Os, and an analog high-quality line/phones output via 6.3 mm TRS jack. Continuing the legacy of RME's famous HDSP Digiface, a triple ADAT I/O interface with phones and PCI interface, Digiface USB simplifies connection with USB 2, does not need an external power supply, and even adds another optical I/O, resulting in 32 channels input and output each when using ADAT optical.

The analog output hosts channels 33/34, and can be used freely thanks to TotalMix FX, RME's routing and monitoring solution that knows nearly no limits in routing and mixing (the Digiface USB does not include FX).

Each single optical port can use either ADAT (up to 8 channels) or SPDIF (stereo). While the inputs adapt automatically to the received signal format, the outputs can be individually switched between ADAT and SPDIF operation. Supported are SMUX and SMUX4. Therefore at 192 kHz either 8 channels via 4 x SPDIF or ADAT are possible on both inputs and outputs.

Its small size, weight and bus-powered operation make the Digiface USB extremely versatile and useful. It could even serve as simple headphone amp for mobile use.

Like all the latest RME interfaces, the Digiface USB also includes the powerful digital real-time mixer TotalMix FX. It allows for practically unlimited mixing and routing operations, with all inputs and playback channels simultaneously, to any hardware outputs. The Digiface USB does not have a DSP, so there are no FX available. Still it includes a dedicated Control Room section with Talkback, Main/Phones, fader groups, mute groups, complete remote controllability via Mackie or OSC protocol, and much more.

Here are some typical applications for TotalMix:

- Setting up delay-free submixes (headphone mixes). The Digiface USB allows for up to 17 fully independent stereo submixes. On an analog mixing desk, this would equal 34 Aux sends.
- Unlimited routing of inputs and outputs (free utilisation, patchbay functionality).
- Distributing signals to several outputs at a time. TotalMix offers state-of-the-art splitter and distributor functions.
- Simultaneous playback of different programs via a single stereo output. The ASIO multiclient driver supports the usage of several programs at the same time. When done on different playback channels TotalMix provides the means to mix and monitor these on a single stereo output.
- Mixing of the input signal to the playback signal (complete ASIO Direct Monitoring). RME not only is the pioneer of ADM, but also offers the most complete implementation of the ADM functions.
- Integration of external devices. Use TotalMix to insert external effects devices, be it in the playback or in the record path. Depending on the current application, the functionality equals insert or effects send and effects return, for example as used during real-time monitoring when adding some reverb to the vocals.
- Every single input channel, playback channel and hardware output features a Peak and RMS level meter, calculated in hardware. These level displays are very useful to determine the presence and routing destinations of the audio signals.

Notes: Sarajewo is an analog delay module based on old school (but newly manufactured) BBD (Bucket Brigade Delay) chips. It features three delay taps, an external clock input with various tempo sync factors, and a wide range of settings controllable via CV. It is based on high quality components with maximum effort put towards the highest sound quality possible, while still preserving the charm of the BBD technology. The module offers a clean and warm analog sound with tons of character and a comfortable user interface with a tap tempo button, signal level indicators, sync and CV inputs, four signal outputs, and an adjustable feedback filter.

TECHNICAL DETAILS:
Eurorack synth compatible
12hp, skiff friendly
Current draw: +180mA / -120mA
Reverse power protection

Notes: mioXL- The MIDI interface redefined

mioXL is iConnectivity's flagship MIDI power-house, packed full with the very best technology and innovations. With mioXL it's never been easier to get huge amounts of MIDI gear connected and talking to each other. Harness the power of iConnectivity's advanced computer and network connectivity and experience why mioXL redefines what a flagship MIDI interface can and should do.

Connect all your MIDI devices (USB-MIDI, DIN-MIDI, RTP/Network-MIDI) and Mac, PC, and iOS computing devices to each other, and let this rugged, versatile interface put you in control of your MIDI devices and workflow.

On stage or in the studio, RTP/Network-MIDI capability means you are no longer constrained by cable length or limited USB ports. Stack multiple interfaces and computers on a network for ultimate scalability and flexibility.

With mioXL you're able to streamline and expand your MIDI setup, no matter how massive and demanding. Even though it's iConnectivity's most powerful MIDI interface, mioXL is still accessible to all users, allowing you to do whatever you want with MIDI faster, better, and in creative and exciting new ways.

What makes mioXL unique? The iConnectivity difference.

Next-gen Ethernet RTP MIDI adds massive capability and flexiibily

iConnectivity's next generation RTP/Network- MIDI capabilities, and what they'll do for you.

Ethernet connectivity means MIDI is on the network wherever you need it. Regular USB connectivity limits you to keeping your interface within 15ft of your computer. Ethernet connectivity gives you up to 330ft / 100m connection between you and your interface. Drop an interface in every room of your studio, or place an interface virtually anywhere in a venue.

RTP/Network-MIDI is not bound by some of the same restrictions as USB-MIDI.

Easy renaming of network ports - have them show up the way you want them to in your DAW.

Access to more than 22 ports per interface.

iConnectivity's unique network technology is as easy to use as USB! Enjoy your new-found MIDI power without extra headaches.

Use your 22 network MIDI ports anyway you want. Connect each of the 22 RTP-MIDI sessions to any combination of physical or virtual I/O ports. Almost any combination is possible.

Configuring mioXL:
Introducing a new version of iConnectivity's Auracle control software: taking the simplicity of workflow that the original Auracle introduced but now with the added deep configuration functionality that iConnectivity are known for. All the deep configuration options you asked for: MIDI merging, filtering, remapping, and deep routing are all there and super easy to use.

mioXL's display, rotary encoder and capacitive touch controls make navigating presets and monitoring MIDI traffic easy

Presets onboard:

Need to configure your MIDI setup in multiple ways? No problem!

New to mioXL : store and recall up to 32 presets directly on the interface, without even needing a computer!

Easily store and recall unique MIDI routing, filter and merging setups to preset scenes, and recall them all directly via the mioXL front panel.

mioXL's OLED display and encoder wheel gives you a crisp clear way of monitoring MIDI traffic, viewing, and selecting presets.

mioXL makes you the master of your MIDI domain. The MIDI interface: reinvented.

What's in the box:

1x mioXL
1x USB Cable.
1x Ethernet cable
1x mioXL 12V 36W Power Supply with interchangeable blades (NA, EU, UK and AU (Australia only)).

Device Specifications:

Width: 482.6 mm/19 in
Height (1U): 44.45 mm/1.75 in.

System Requirements

Macintosh
Mac OS X 10.11 or greater
1 free ethernet or USB port

Windows
Windows 10 or greater
1 free ethernet or USB port

iOS
iOS 8 or greater with Camera Connection Kit (CCK)*
CoreMIDI compatible app

Notes: The Ultimate Eurorack Utility Module (and a whole lot more!)

The DATA is a digital platform for testing, measurement, and signal generation in Eurorack modular synthesis systems. It is a modular tool kit, with functions applicable to any system and style.

Use the DATA's scope to view the interactions between your control voltages and audio signals, allowing you to master your modules by understanding their voltage ranges, control shapes, and parameter responses. Use the DATA's dual waveform generator to dial in a precisely scaled LFO for CV control, or use the waveform's frequency "note mode" to effortlessly make dyads (two note chords). Use the DATA's clock program as a master clock or to divide or multiply an incoming clock signal, sending four different clock outs to gate modules directly or as control to sequencers.

The possibilities of the DATA are basically unlimited; with the included microSD you can update the DATA's firmware and we can continue to refine and create new programs.

Notes: The Vermona Filter Lancet is a compact but versatile stand-alone multimode filter for your desktop. It's the right weapon against static sound and boredom and made for any kind of audio signal. The filter section itself has 3 modes: low-pass, high-pass and band-pass. The last one works with a slope of 12 dB per octave whereas low- and high-pass are 24 dB filters.

You can give the filter some extra punch with the Balls knob, known from Kick Lancet. It pushes low and high frequencies of the signal before being filtered. And of course the resonance is self-oscillating.

Other than the filter section of Mono Lancet, the Filter Lancet is not based on (Moog-) cascade circuitry. It was inspired by the filters of the Vermona M.A.R.S. respectively DAF-1 and Action Filter.

Without modulation the Filter Lanced would still be a good filter but kind of boring. So it is equipped with a LFO, an envelope generator, an envelope follower and a CV/pedal input. The LFO has 2 frequency ranges and goes up to 250Hz - that's fast. At low frequencies the LFO can be re-triggered by gate- or audio signals. It has sample & hold and five waveforms: saw up and saw down, square, sine and triangle.

The envelope generator can be triggered by the input signal or an additional audio signal as well as by a gate voltage. If triggering it via gate it works as an attack-sustain-release envelope. With audio triggers its mode is attack-decay. The envelope follower transforms the contour of the input signal into control voltages that can serve as modulation source.

The LFO modulation intensity can be set separately from modulation intensity of envelope generator and envelope follower on the VCF- as well as on the VCA section.

The Filter Lancet features a drive circuit right in the input section to add subtle shades of overdrive up to solid distortions.

The Filter Lancet is packed with useful features. It's a great and powerful addition to any synthesizer including Mono Lancet with or without Modular Dock. But Filter Lancet also is designed for stringed instruments. It creates standard effects like WahWah and tremolo with ease and even adds a palette of extraordinary sounds to any effect repertoire.

Notes: The definitive MIDI controller keyboard, KeyLab MkII is a luxurious, expressive tool for your studio or live rig. Unsurpassed connectivity, effortless integration, customizable interface, and inspiring included software; there simply is no other MIDI controller quite like KeyLab MkII.

KeyLab MkII is an expressive, versatile, and superbly powerful next-generation USB MIDI controller keyboard. It features dynamic performance and studio controls, including a high quality 49-note keyboard with aftertouch, 16 RGB backlit pads, 9 faders, 9 rotary knobs, and dedicated DAW and transport controls. Its huge connectivity also includes CV/Gate outputs, so you can take command of outboard synth and Eurorack modules with ease. Factor in the amazing included software, and you've just found your ideal creative companion for the studio and stage.

Another level in terms of quality and luxury, KeyLab MkII is a treat for the fingertips and gives unprecedented levels of control over your music and software.

Both 49-key and 61-key versions of KeyLab MkII feature Arturia's Pro-Feel action, the same lusciously playable keybed as the MatrixBrute and MiniBrute 2. Sensitive enough to accurately capture the subtleties and nuances of delicate playing, while still being robust enough to feel the energy of high-impact playing.

Every version of KeyLab MkII also offers 16 RGB-backlit, multi-function performance pads which can be used in a huge variety of ways, whatever suits your performance style or studio needs best. Trigger custom chords, activate samples, quickly switch user maps, KeyLab MkII puts the "control" firmly back into "controller".

A gateway to software, KeyLab MkII features 9 rotary encoders, 9 faders, and a selection of fully assignable buttons to give you unfettered access to your virtual instruments, effects, and recording environment. Send and receive CV/gate data to bridge the gap between modular and MIDI, with a fully customizable setup.

To allow for maximum expression, and to put that unmistakable "human touch" into your music, KeyLab MkII features multiple expression pedal inputs, that can be assigned to whatever parameters you desire in your DAW or virtual instruments, and sports robust, luxurious machined metal pitch and mod wheels. Truly a live-performers dream!

Amazingly versatile, hugely expressive, and geared up to enhance your creativity and workflow wherever your music takes you.

Included is an impressive software bundle: Arturia's complete Piano V virtual piano instrument, Analog Lab 3, and Ableton Live Lite.

Notes: Mono Lancet '15 might be small-sized device, despite it is a bona fide analogue synthesizer.

Two oscillators and a noise generator are the foundation for its sound. Together with the musical lowpass filter and VCA it's capable of producing warm and precious sounds full of character.

Beside its audio qualities Mono Lancet '15 has a dead simple and intuitive user interface. Each parameter has its own control. We are absolutely convinced that you will quickly learn how to realize your sounds with Mono Lancet '15 without thinking about what you do.

Expandable with Modular Dock:
Mono Lancet '15's functionality can even be enhanced using the optional Modular Dock eurorack module. It offers various in- and out-connections to the individual sections of the synthesizer. With just a few additional modules you can multiply the strong sound base of Mono Lancet '15.

Mono Lancet '15 is manufactured in our Elektroakustischen Manufaktur in historical Vogtland. For us it is not only a piece of high-quality analogue technology but rather a musical instrument, handmade with love and passion.

Ships with UK 3-pin power supply.

For audio demos, please visit - http://www.vermona.com/en/products/synthesizer/product/mono-lancet-15/

Notes: Each generation of VLZ mixers benefits from a reinvestment in performance, all without raising prices. By continuing to ignore the "race to the bottom," VLZ4 benefits from generations of performance improvements like transparent EQ, class-leading negative summing bus architecture and custom-designed op-amps to ensure signal integrity from every input to every output. The result is a mixer that is at the peak of performance and is the obvious go-to compact analog mixer for engineers who demand professional results.

The performance of Mackie's Onyx mic preamps is more than proven. Just check all the amazing reviews and customer testimonials. Their boutique quality sound and unmatched performance rival any high priced, boutique preamp on the market. Adding these flagship preamps to our VLZ4 Series compact mixers underlines our commitment to continually improving the performance of the VLZ line with each generation.

The VLZ4 design goal was simple: every VLZ4 mixer must have the highest headroom and lowest noise possible. Strict attention to component quality and tolerances has led to innovations like our custom M80 op-amps and class leading negative summing bus architecture that add yet another level of assurance that a Mackie VLZ4 mixer is the right choice for your professional audio application.

Mackie VLZ mixers are truly built like a tank. From beer spills to drops from moving vehicles, the testimonials are as endless as the applications Mackie mixers serve. The VLZ4 series is certainly no exception. With a nearly indestructible steel wrap around chassis and features like grime resistant rotary sealed pots, you can be sure that buying a Mackie VLZ4 mixer is a solid investment.
VLZ4's new black powder coat finish, cockpit inspired controls and high contrast knobs not only optimise your mixer's usability in low light scenarios, it also means your mixer looks as good as it performs.

Mackie's VLZ4 line is extremely comprehensive, offering mixers of every channel count, every price point, for every application. From the ultra compact 402VLZ4 for desktop applications to the tour friendly 3204VLZ4, you can be sure there is a VLZ4 mixer with the right feature set for your needs

Notes: Tiptop Audio's Z-DSP is a cartridge-based open source digital sound processing and effects generating platform for your modular synthesizer. Lush audio processing, greater stereo depth and a unique set of digital synthesis is what the Z-DSP is all about.

The Z-DSP has a stereo digital sound processor with 24-bit sampling, 15kHz of bandwidth, voltage-controlled parameters of stereo feedback, program switching, DSP parameters, equal power crossfading dry/wet mixing, as well as sequential program control switching and a clear display - all in Eurorack format. A dedicated clocking input for the DSP chip does wonders to passing sound by bending the algorithms in an unexpected way, a hardware technique computer plugins can't do and is unique to the Z-DSP.

In a recent update, the Z-DSP (NS) got an all new design of its analogue circuitry, contributing to a lower noise signal path, clearer sound of the entire frequency range, lower distortion and better immunity to noise emitted by other modules sharing the same power supply. A new analogue dry/wet circuit has been implemented to remove the 3db gain drop when the mix knob passes through the centre of the dial making the use of this function more practical in a live application. A reverse polarity protection has been added as well. The new front-panel matches Tiptop's colourful design, and a single printed circuit board and surface mount technology improve reliability during production and use. The powerful Z-DSP engine remains the same as the original Z-DSP module and all cards are compatible across both versions.

An assortment of interchangeable cards, programmed by Tiptop Audio and specialists like Valhalla DSP, provide a wide range of boutique effects algorithms such as Halls of Valhalla, Time Fabric, Clocked Delays and Grain De Folie. Tiptop Audio also offers blank Z-DSP cartridges and a development tool called NumberZ for developers, students and power users who want to design their own effects and cards with the FV-1 DSP chip programming language. Blank cards can be loaded using programs that are freely available for non-commercial use and can be found in the modular community through online forums. With each card swap, the Z-DSP takes on new effect algorithms, changing like a digital chameleon and bringing colourful digital effects processing to your Eurorack setup.

The Z-DSP comes included with 2 cards: Halls of Valhalla and Dragonfly Delay MKII.

Notes: Maestro is a 6 channel clocked modulation controller inspired by the automation lanes found in digital audio workstation software, brought into eurorack and made playable and performable. Maestro will push and pull the parameters of your other modules with rapid or slowly evolving voltages, always in perfect sync with eachother and the rest of your system.

Details:

20hp

25mm deep

65mA on +12, 18mA on -12, 0mA on 5V

Notes: Spanning the gamut of known delay possibilities and beyond, the Echosystem could be the ultimate delay-crafting tool. Faithful emulations of classics like digital, tape and analog delays are numerous, as well as Empress' own take on each of these delay styles. Moving beyond the traditional, the vast amount of sonic ground the Echosystem can cover becomes apparent. Check out the ambient modes when you're feeling chilled out, or perhaps a visit to the multi tap modes for a taste of inspiration.

The Dual Engine functionality allows any 2 of these delays to be used together, routed in either parallel, series, or left/right configurations.

In addition to delays, there's the super-useful reverb combos, which will elevate any guitar part. Oh, and don't forget Whisky mode, best accompanied by a dram of whatever you've got!

The pedal has 12 algorithm types, all with multiple variations. For example, there are 4 different tape delays on tap.

Emulations of classic tape and analog units are available, as well as our take on these types of delay.

All the algorithm controls are sitting on a knob in front of you, no fiddling through laborious menus.

Global tap tempo as well as local tempo with lots of subdivisions are available on all modes, in addition to being able to set the delay time directly with the knob.

Features a signal to noise ratio of >104dB and maintains an analog dry path.

2 delays can be used at the same time, each with its own full set of controls and routed in serial, parallel or left/right.

Settings can be saved to 35 presets. With three stomp switches, accessing the presets is easy.

Bank style or scrolling style preset modes.

It can be configured to run with true bypass or buffered bypass if you want to hear trails.

Cabinet Simulator - 3 variations to choose from, perfect for recording, practicing or for gigs without an amp.

Get hum-free operation when operating in stereo with two amps. Output 2 is isolated with a transformer to eliminate nasty ground loops.

48kHz sampling, with 24 bit conversion and 32 bit internal processing.

Dry signal is left untouched, and blended with the wet signal using VCA. (no zipper noise, hooray!)

The Universal Control Port allows you to connect an expression pedal, external tap switch, control voltage, external audio input and MIDI - all using a standard 1/4" jack!

The Advanced configuration menu lets you configure how your delay works. Select from true or buffered bypass, 0-35 presets, MIDI configuration, Control Port(expression pedal, external tap, control voltage and MIDI) as well as which style of preset system to use, input signal pad, output transformer enable and more!

The enclosure measures approximately 5.7" by 3.75" by 1.75", which is delightfully small when considering all the features packed into this unit.

Notes: The next generation 12 stage, analogue multi tap Phaser, which is a development of, and replacement for, our earlier MegaPhase 12 unit. It includes all the features of the MegaPhase 12 and is also built around the circuitry of the superb sounding EH Smallstone Phaser, which was used to such great effect on synthesisers and string machines by J M Jarre on his early albums. It has the same versatile Stage and Emphasis stage switching, and the same configuration of stereo outputs, where the left channel is taken from the Stage switch, and the Right output from the Emphasis Stage Switch.

New features include independent Level Controls for Input 1 and Input 2, and a Phase "Colour" Control, which can lighten or darken the phasing effect. We have also used much lower noise internal VCA's and low noise audio op-amps along with a four layer PCB design, so that the S/N ratio is improved and the noise floor is considerably reduced compared with the previous MegaPhase 12 phaser. Like its predecessor it occupies 18HP of Eurorack space.

Notes: Very nice little physical modelling voice, serving up to eight notes of polyphony via stereo outputs. Plucked strings, tuned percussion, an excellent prepared piano mode and more.

Supplier notes:
Surface is a multi-timbral physical modeling voice. Its output ranges from plucked strings and marimbas, all the way to FM drums.

Each model features stereo outputs and up to eight unique voices that can be active at a time.

Notes: Ultra-characterful 80s grit from this unique stereo delay. The BIM's 12-bit circuitry gives all that vintage colour with modern features like perfect stereo balance, MIDI control and tap tempo.

Supplier notes:
BIM is a 12-bit stereo delay unit inspired by some studio delay processors built in the early 80s. These monophonic processors have been renowned for the quality and musicality of their sound. The processing was mainly analog (companders, limiters, low-pass filters, feedback path,...), and the signal was converted to digital just for the delay section, using 12-bit AD/DA converters and some RAM memory chips.

The advantage of this technology is particularly obvious when the sound is feedbacked many times through the whole analog and 12-bit circuitry. You'll hear a sweet degradation and dark damping that the 100% digital delay boxes can't offer. BIM was designed with the purpose of creating a unique, modern and versatile effects processor based on this 80's technology.

The sound of an old 12-bit digital delay has been mixed with modern features such as stereo processing, extra FXs, many user presets, MIDI control, tap tempo, compact size- therefore BIM is the best of both worlds!

BIM is the perfect companion for the musician, producer, sound engineer or live performer who is looking for a unique, warm and musical delay processor.

Notes: Revised take on the excellent Benjolin dual oscillator and filter from Rob Hordijk, featuring the 'rungler' stepped CV generator and extensive output options.

Supplier's Notes:
Benjolin V2 - Rob Hordijk's latest revision of the classic Benjolin. The core of the Benjolin continues to be two oscillators, the rungler (stepped CV generator), and a multimode filter.

This latest revision adds:

Reworked oscillator and filter sections

All levels are adjusted to eurorack standards

Two different steps modes (8/16 and 127)

Double and single clock rate

Externally clockable

External filter input with blend control

Notes: The Falistri is a fully analogue multi-purpose movement manager designed to generate and edit voltages to easily accomplish any patch.

The module can be divided into two big parts: in the upper two-thirds of the panel take place two specular function generators, while the lower third is composed of a dual cascaded frequency divider, a linear slew limiter, and a four-quadrant multiplier.

Key features:

Two Function Generators: Envelopes, LFOs, Oscillators
Adjust the Shape Without Changing the Time
Exclusive Shapes per Stage
Trig Buttons: Play Those Envelopes!
Three Play Modes (Voltage-Selectable)
Interacting Functions: Quadrature Mode
All the Outputs, Everywhere
Cascaded Frequency Dividers
Four-Quadrant Multiplier
Linear Slew Limiter

Size 18 HP
Depth 38 mm

Current draw
170 mA @ +12 V
170 mA @ -12 V

Notes: The SAPEL is a random control voltages source for Eurorack modular systems. It is composed of two main sections, one that generates audio noises, in 4 different versions, and another which includes two specular random clock, random voltages and clock sources.

Noise outputs are colour coded, based on the noise colours, and include:

- Blue (+3dB/oct spectrum)
- White noise (0dB/oct spectrum)
- Pink noise (-3dB/oct spectrum)
- Red noise, a.k.a. Brown or Brownian (-6dB/oct spectrum).

The random voltage and clock section features four uncorrelated random CV generation paths, divided in;

- Fluctuating random voltage;
- Quantized random voltage with 2n stages tuned in semitones referred to 1V/oct scale;
- Quantized random voltage with n+1 stages tuned in octaves referred to 1V/oct scale;
- Non quantized sample & hold.

It is also possible to set a probability distribution with a potentiometer, and apply (or do not apply) the chosen distribution setting to each of the four paths independently.

Furthermore, each of the two random sources section features an independent built-in clock generator, with clock output and random clock output, which can be used in "more than" or "less than" mode. It is possible to use an external clock signal as a clock source, bypassing the built-in one. In addition to that, it is also possible to hand trigger the clock via a manual sample & hold button, which can be also modulated by gate signals.

Notes: A multi-voice synthesizer that will track your guitar for tight monosynth leads, complex chord polyphony, or multi-note sequenced arpeggiation. All without any special pickup installation. Just put it on your board and discover your own reality. The Enzo isn't limited to guitar; use it on any instrument whether drum machine, vocals or other synths. Completely transform your input signal and synthesize. Use the full synth palette of multimode analog style synth filters, ring modulation, envelopes and much much more to drive punchy, thick synth textures. Or, explore an altered state of your pure instrument signal by transforming it with pitch, time and modulation effects. Plug in to a revelation generator.

Premium quality 24 bit A/D and D/A

32 Bit floating point DSP hardware

Premium low noise Analog signal path throughout

Digitally controlled Analog Dry path for wet/dry mix

Analog Devices JFET input circuitry

Selectable True Bypass (Relay) or Analog Buffered Bypass

Durable translucent coat of vibrant gold over brushed aluminum

Current draw < 150 mA

Dimensions - 4.25" wide, 4.5" long, 2" tall

Notes: A multi-VCA module on steroids, the Morph 4 is designed as a modulation hub for an entire Eurorack system, capable of working in coutnless different ways. Proper versatile business.

Supplier's Notes:
Modulation is the core concept of modular synthesis: parameters changing over time, adding movement and musical interest to what would otherwise be merely static sounds. Being able to control the amplitude of signals throughout a patch is therefore essential, and one can never have too many voltage controlled amplifiers (VCAs).

Designed as a fully-featured modulation hub for Eurorack synthesisers, Morph 4 takes the basic concept of the multi-VCA module to the next level.

Four linear amplitude modulators are controlled by a master 'morph' parameter. The response of each modulator to this parameter is completely variable, both manually and under voltage control, and can be overridden if desired. Each response is triangular, with the 'position' parameter setting the maximum point along the morph axis, while 'span' determines the width of the triangle's base.

In addition to separate signal inputs and outputs, a variety of combined outputs is available as well: A+B, C+D, add (unity gain) and averaging mixes, and instantaneous minimum and maximum. Input normalisation makes it easy to send the same signal to multiple modulators, while output and modulator response LEDs provide essential visual feedback.

The combination of master control, fully flexible modulators and multiple combined outputs creates a module truly embodying the spirit of 'patch programmable' modular synthesis. Use Morph 4 as a voltage controlled mixer, dual crossfader, dual panner, interpolating scanner, interpolating distributor, quad VCA, quadraphonic controller, slope modifier, rectifier, complex waveshaper or something in between any of those- the choice is yours.

Notes: Jomox's legendary analogue kick drum prowess distilled into Eurorack form. Hugely versatile sound with plenty of CV control on the front panel, plus MIDI via DIN sockets hidden round the back.

Supplier's Notes:
The mightiest Bass Drum - MK II

Tune Varies the pitch envelope of the VCO

Pitch Basses as low as 10Hz reach up to 175Hz

Decay Up to 2 sec

Harmonics Enrichment of harmonics of the VCO - for the hardest kick drums on planet earth

Pulse Change of the pure pulse part of the attack - gate time affects this parameter also

Noise Change of the pure noise part of the attack - gate time affects this parameter also

Attack Level of the mixing of Pulse and Attack

EQ Filters the bass drum with a low pass filter - for soft and 808ish kick drums

Gate T Varies the gate time from 0.1ms to 16ms

Compr Compression of decaying envelope - for slim and clicky kicks and all the depth that is needed

MetNze Metalized noise. A complex digital multitone pattern of 499 different combinations feeds the attack noise

CV1-CV4 can route the external 0-5V CV signals to any of the above parameters including LFOs. Also negative amounts are processed.

LIN.FM This is a true analog dedicated CV FM modulation input for the bass drum VCO. It only works linear-wise and does not offer musical semitones across the CV scale.

ACC This is a CV input for the kick drum accent / velocity. This input may also trigger the kick drum dynamically if the ACC trigger mode is set and the sequencer is able to generate dynamic pulses.

LFO The ModBase 09 has 2 LFOs that work on the pitch of the bass drum. The LFO always starts syncronous to the gate trigger.

The wave forms are: saw up, saw down, sine+/-, triangle+/-, rectangle+/- and portions of it.

MIDI The midi controllers of this module are identical to the Alpha Base/XBASE999/MBase11. All parameters including LFOs can be remotely controlled by Midi CCs.

Bus Env Is the programmable level of the audio out signal from the bus on the back mixed to the Kick Drum VCA envelope. Works with experimental Jayemsonic modules.

140 mA +12V
80 mA -12V
0 mA 5V
53 mm deep

Notes: Harness the Sound of Failure with Data Bender.

Data Bender is a circuit bent digital audio buffer. It is inspired by the ways in which audio equipment can fail. The sounds of skipping CDs, software bugs, and defective tape machine playback are all accessible. The 96kHz, 24-bit audio buffer can hold over a minute of stereo audio, providing a sonic canvas capable of infinite surprises and discovery.

Circuit bent digital audio buffer

Skipping CDs, software bugs, old tape machine, scratched records

96kHz sample rate, 24-bit depth for high fidelity audio with over a minute of stereo sampling time

Stereo IO

Tech Specs:

Width: 14HP

Depth: 28mm

Power: 58 mA +12V, 60 mA -12V, 0 mA 5V

Color: Silver

Notes: The Stereo Triggered Sampler can record high quality stereo files, while simultaneously playing two different stereo files. A maximum of 600 samples can be loaded from the removable/swappable microSD card, in a variety of formats up to 96kHz/32-bit/stereo WAV. All sample parameters (1V/oct pitch, sample file selection, length, and start position) are CV controllable.

600 Samples:
A maximum of 600 samples can be loaded at once, arranged into banks of 10 samples each. Samples and banks can be re-arranged on the fly using the simple on-board Edit features. Newly recorded samples can be instantly played back and re-pitched, reversed, chopped up, etc... the result of which can even be bounced down and re-recorded to as a new sample! Sample files are limited to 4GB each, which is over 6 hours at 44k/16b/stereo.

Two Stereo Playback Channels:
Each playback channel has a knob and CV jack for Sample File selection, as well as a Start Position knob and CV jack for controlling where in the sample playback will begin. The Length knob and CV jack determine how much of the sample is played back: from tiny grains, to percussive hits, to longer loops... or just the entire file. These are powerful tools for re-arranging a sample, joining multiple samples, and creating dynamically re-sized loops within a larger sample. Combined with the Play Trigger jack and the 1V/oct jack, the STS can be two complete multi-timbral pitch-tracked stereo voices!
There's also a Reverse button and jack for backwards playback, and an End Out jack for synchronizing loops, or cascading sample playback with other events.

Looping and Sync:
Looping is easy: just hold the PLAY button down for two seconds to toggle loop or one-shot. The loop timing clock will output from the End Out jack. Or, send a clock into the Play Trig jack to sync the loop to external timing.

Stereo Recording:
Whether you patched 47 modules to create the ultimate percussive blast, or you want to capture your four hour ambient performance, recording high-quality .wav files on the STS is simple. Just hit the REC button or fire a trigger and a new stereo .wav file will be created on the SD card. Do as many takes as you need: the STS never deletes your files. Re-ordering or re-arranging samples into banks is easy, even without a computer.
You can even fill a bank with 10 different variations and immediately use them for playback.
By default the STS records at 44.1kHz/16-bit, with an option for 24-bit (a future update may increase the sample rate to 96kHz)

Easy sample loading:
Using a computer is completely optional with the STS, since samples can be recorded directly to the module and placed into the bank of your choosing. But for users with large existing sample banks, the intuitive automatic bank loading features make dragging and dropping your entire sample library a snap. You never have to rename your files again!

Notes: Legendary sound meets the generation of mobile musicians: With the reface Mobile Mini Keyboards, Yamaha introduces a small revolution. Based on legendary synthesizer models like the DX7 or CS series, the company presents four compact instruments, which play to their strengths on the road, on stage or even in the studio. reface is perfect for songwriters, sound designers, live performers and those looking for access to an instrument which allows them to react when inspiration strikes. The online collaboration with musicians around the globe via Yamaha's 'Soundmondo' sound community and the easy connection to notebook, Apple iPhone and iPad are making the four models ideal for being creative together. Battery power and integrated stereo-speakers make the reface quartet ready to play at all times.

From Pink Floyd to Michael Jackson to U2 - with over 40 years in synthesizer history, Yamaha influenced Rock and Pop music like no other instrument manufacturer. Legendary models and series like the CS Control Synthesizer or the DX7 are an inherent part of music history. Time for a small revolution: With the reface Mobile Mini Keyboards, Yamaha presents a range of ultra-mobile synthesizers and a stage-piano that impress with their compact design and web-based sound-exchange. They build the bridge between the sound tradition of the legendary prime fathers and the cooperative music production over the internet.

It started as a sketch of a young Yamaha design team: Under the concept name "reimagined interfaces of classic Yamaha keyboards" the group presented a series of four compact instruments, in which every single one celebrates the personality of a legendary Yamaha instrument - but with a character of its own reimagined for today's 'on-the-go life style'. The concept also integrates a web-based sound exchange between musicians and allows a cooperative sound design. With the introduction of reface, this vision becomes reality.

At home, in a studio, in a park or on a train - the compact design and the powerful integrated stereo speakers allow inspiration in seconds - without any equipment to set up. Creativity can be realised anywhere: Thanks to the battery power, all reface Mobile Mini Keyboards are ready at any time - even when there is no power socket nearby. The setup is done in seconds, even the connection to notebook, iPhone or iPad for the recording and saving of sounds.

All four reface models are presenting themselves as a creative toy for sound design. But despite their compact design, they are professional instruments that are inviting to play. All models feature Yamaha's brand new 'HQ' Mini-Action keyboard with 37 keys (3 octaves). The user interfaces were designed separately for each instrument introducing features such as drawbars for the reface YC organ and the capacitive Multi-Touch surface on the reface DX.

reface YC: Electric Combo Organ - Rich, punchy sounds are its area of expertise: The reface YC offers additive synthesis paired with a unique power of expression using nine drawbars and virtual rotary speakers. The instrument combines five different models of organs, the sound is created using a special "Organ Flutes Tone Generator". In addition to the possibility to carry around five organs in a single piece of hardware without breaking your back, the reface YC delivers the authentic spirit of playing an organ using the smallest user interface possible.

All four reface models offer a rich potential for creative sound design - and the opportunity to get in touch with the whole world: With Soundmondo, Yamaha created an online hub connecting the reface community all over the globe. Soundmondo offers creative possibilities to create, share and discover sounds. The connection is established intuitively using a special Web MIDI technology for Google Chrome. As soon as a reface model is plugged in, it offers the possibility of direct synchronisation. Voices and set lists can be stored in a private area as well as shared with the community.

Quick and easy storage as well as management of sounds with iPhone and iPad: The free reface iOS app for Apple mobile devices makes data transfer extremely simple. A name, a picture and multiple tags can be applied to stored voices; they can be sorted in different ways as well. Search functionality is also included. Using a set list, voices can be arranged in a specific order and recalled one after the other. Another impressive feature is the possibility to exchange voices using QR codes: A distinctive code can be generated from any stored voice and can then be shared using the different options available with iOS. It can for example be sent via email or read using the camera of another iPad to import it into the app.

Notes: A whole lot of module for the money. Eight-track trigger sequencing with built-in drum synth, sample player and MIDI. Amazing value for studio use or live performance.

Supplier's Notes:
Trigger sequencer with audio and midi

TUKRA is an 8 track eurorack trigger sequencer with drum synth, sample player and midi.

This module can be an 'all in one' solution for drums, but also has great integration capabilities with other gear (eurorack modules, drum boxes, DAWs, midi devices and midi surface controllers).

There are no submenus, all functions and views are accessible all the time.

Brief overview:
- Up to 64 steps per pattern, 64 patterns, 64 parts and 16 songs per project. 64 projects in the microSD card.
- Play mode, clock divider, length & choke settings independent per track & pattern.
- Step value (can be used for modulation, to define the midi velocity, midi note & drum synth pitch or sample selection).

Ins & outs:
- 8 trigger/gate, clock & reset outputs. Clock & reset inputs.
- 4 CV inputs with offset potentiometers (so they're manual controls when no CV is plugged in).
- Audio L & R out (6 additional ones with the expander for independent track output).
- Front panel midi TRS in & out, and USB host for midi controllers.

Midi and audio:
- Midi note and channel configurable per track & song, midi note and velocity can be set by the step value.
- Drum synth, noise with envelope and 'one shot' sample player (factory and user banks) per track.
- Flexible sample selection (each track can play up to 128 samples).
- Mixer with volume, balance, reverb, bit crusher, filter cutoff, resonance and type (smoothly crossfades LP - BP - HP).

Modulation:
- CV & assignable midi CC plus 8 internal LFOs, 3 stepped random sources and step value.
- Modulation matrix for almost all parameters.

Rhythm variation:
- Probability for step, gate and roll.
- Euclidean Rhythm Generator.
- 'Ramifications' generative tool.
- Live view with solo, mute, fill, roll, invert pattern, reverse play direction and rotate.

Time:
- High precision clock source and low latency.
- External sync (via trigger, midi TRS or USB).
- Triplets and swing (aka 'shuffle'), triplet and swing can be generated from a straight clock input or midi clock.
- Micro grid edit, each step has 6 micro steps (24 ppq).
- Half and double tempo functions.

Notes: Updated version of IK's impressive iLoud monitors featuring real-time DSP correction to compensate for the acoustics of your lab.

IK's iLoud Micro Monitors stunned an industry. Producers and engineers at every level marvelled at the performance coming from such a small setup, so IK challenged our team to push its concept even further - to design a new compact speaker to rival 5", 6" and even 8" monitors.

The result is iLoud MTM, and it changes everything about the sound, accuracy and convenience of reference monitors in today's modern studio.

Once you hear iLoud MTM, you'll find it hard to ever go back to traditional big-box speakers.
Reference-class, ultra-linear response:

The first job of any studio monitor is to deliver accurate, un-coloured sound so you can trust your mixing decisions will translate across multiple playback systems. iLoud MTM uses the most advanced DSP techniques to provide total control over the speakers' performance, delivering results simply not obtainable with traditional analogue designs.

Highs are neutral and defined, mids are clear and balanced, and lows are as balanced as ever. You can mix for hours with no ear fatigue, and the work you create will translate better than ever. And of course, it's loud, with 100W RMS total power per speaker and 103dB SPL maximum sound pressure, delivering the proven volume the iLoud brand is known for.

Extended low-end to rival larger systems:

iLoud Micro Monitor wowed the world with the bass performance it delivered from a 3" speaker that "defied physics". But iLoud MTM offers even more, with even bass response down to an astonishing 40Hz ideal for modern music styles.

iLoud MTM debuts IK's new patent-pending Physical Response Linearization (PRL) system, that uses a precise model of the enclosure's design, construction and materials, combined with electro-mechanical measurements of the real units, to correct the system's performance in real time. The result is a stunningly "firm," balanced and defined low end, to surpass the sound of speakers even twice iLoud MTM's size.

Deep bass is solid and firm - you won't believe sound like this comes from a monitor so small.

A new phase in accurate sound reproduction:

Most conventional studio monitors, even high-end designs, suffer from skewed phase response caused by traditional, phase-shifting crossovers and driver/enclosure phase alterations. The end result is an unfocused stereo image, blurry transients, and overall lack of detail. iLoud MTM leverages IK's two decades of DSP experience to offer a true phase-coherent response across the useful frequency spectrum, for unbelievably realistic, natural sound like you've never heard.

You'll hear instruments and dialogue as if it's happening live, discover more detail in your tracks than ever before, and stop wasting hours trying to EQ away issues with your mixes that were never really there. This linear-phase response is rarely found in speakers even several times iLoud MTM's price, and has to be heard to be appreciated.

Symmetrical MTM design for superior imaging and precision:

iLoud MTM uses a midrange-tweeter-midrange symmetrical design, with a pair of 3.5" high performance woofers and one 1" high definition, back-chamber loaded tweeter, which provides ultra precise, defined, point source sound that can't be achieved by traditional 2-way systems at close distances. This means an even more natural, life-like sound, where the speakers "disappear" and you can focus on the music. It also minimizes the ear fatigue caused by traditional 2- or 3-way designs, where different frequencies arrive at your ear at different times. So you can mix longer, with less effort.

iLoud MTM's design also offers exceptional sound dispersion, enhancing the transparency and neutrality of what you hear.

Instantly adjust to any room environment:

Today's studios can be anywhere, from acoustician-designed spaces to a spare bedroom. Too many speaker manufacturers keep designing for ideal acoustic environments, ideal positioning and large listening distances. But many musicians simply don't have that luxury.

iLoud MTM offers built-in acoustic self-calibration via the included ARC reference microphone, to automatically adjust the frequency response to its placement. Just set up the monitors, put the microphone in your preferred listening position, press a button and you'll instantly have a custom calibration for the sweet spot of your listening environment.

Digitally-controlled for precision audio:

iLoud MTM uses audiophile-grade high resolution algorithms and the top-of-the line A/D converters to carefully manage cross-overs, filtering, time alignment, equalization, dynamics control and auto-calibration. Totally DSP-controlled and precision time-aligned, iLoud MTM also manages the off-axis response to manage the effects of room reverberations.

***NOW INCLUDES FREE T-RACKS METERING SUITE UPON REGISTRATION WITH IK MULTIMEDIA***

Notes: The Tapographic Delay is a complex multi-tap delay in the Eurorack format with a unique interface designed for live performance. It excels at transforming the simplest audio (a drone, a percussive sound) into complex rhythmic structures, meshes of organic textures, lush harmonic mille-feuilles, liquid and resonant effects.

Have you ever got tired of the monotonous repetitions that your standard delay pedal/module produced? Have you ever wished for a more complex rhythmic structure than just decaying repetition? If yes, you have come to the right place: the Tapographic Delay is an advanced effect that lets you handle repetition in a completely novel way. It is to a traditional delay what a full rhythmic sequencer (with pattern recall, velocity control, tactile input) is to a simple clock. With the TD, you interactively define the rhythm that the repetitions will follow: a velocity-sensitive sensor allows you to record, edit, modify, and sequence your own arrangements of delays. In a sense, the TD is the converse of the classic Frippertronics sound-on-sound setup popularized by Robert Fripp in the 70's: you don't play the guitar, you play the tape loop!

The Tapographic Delay is an expressive experimental instrument meant to be played in real-time, rather than a set-and-forget end-of-chain effect. Interact with it! Experiment! Push it to its limits!

Notes: The Studio 1824c 192 kHz USB-C audio interface is ideal for producers interested in recording full bands, including multi-channel drums. It records up to 18 simultaneous inputs and features 8 XMAX Class A mic preamps, as well as MIDI I/O. Its 20 outputs offer flexible routing with zero-latency DSP-based monitor mixing and control-room integration with included Studio One Artist music production software and UC Surface control software.

World-class recording software included:

Seamlessly integrated with the included PreSonus UC Surface control software for macOS, Windows, iPad, and Android tablet and Studio One Artist music production software, the Studio 1824c audio interface works with virtually all macOS and Windows recording software. Easy to learn, Studio One enables you to compose, record, and produce without getting distracted by the tools. Need a new loop or sample for your latest production? Studio One lets you shop, audition, and purchase new content right from your production environment - including powerful extensions for Studio One like the CTC-1 Console Shaper and Presence XT Editor.

Take the tour:

The Studio 1824c audio interface features USB-C computer connectivity and records up to 18 simultaneous inputs, including two combo mic and switchable line/instrument inputs and six mic/line inputs, all with XMAX mic preamps and +48V phantom power. Digital inputs include eight channels of ADAT Optical I/O (four channels at 96 kHz) and stereo S/PDIF I/O. In addition to the main L/R outputs, you get eight DC-coupled line-level outputs that can send control voltages. You also get two headphone outputs. A built-in MIDI interface enables connection to a keyboard, sound module, or control surface.

Superior sound:

The Studio 1824c audio interface operates at up to 192 kHz for ultra-high-definition mixing and recording. High-quality converters on every input and output and PreSonus' professional-grade XMAX mic preamps deliver incredibly high headroom, deep lows, smooth highs, and a rich overall sound.

Designed for producers who need more:

With ample connectivity, onboard monitor mixing, pristine mic preamps, and up to a 192 kHz sample rate, the Studio 1824c audio interface will give you the ultra-high-definition sound and versatile connectivity you need to make state-of-the-art recordings. The perfect companion for any recording software, the Studio 1824c's integration with Studio One and remote control with UC Surface provide a complete and thoroughly professional recording studio.

Includes Studio Magic Plug-in Suite:

This suite of plug-ins adds a wealth of fresh sounds and effects to Studio One. Cherry-picked from the first names in virtual instruments and effects, each plug-in brings a different flavour of practical magic to your songs. These plug-ins aren't gimmicky one-trick ponies - these are real-deal workhorses that you'll rely on for countless mixes.

Notes: In the 15 years since they were introduced, the HS Series powered studio monitors have become a favourite in professional, project and home studio environments.
The new special edition HS5 MP Set includes two HS5 monitors, both manufactured using a unique process and both utilising specially selected parts. The result is a pair of monitors, each as closely matched to one another as is possible.

2-way bass-reflex bi-amplified nearfield studio monitor with 5" cone woofer and 1" dome tweeter
54Hz - 30kHz (-10dB), 74Hz - 24kHz (-3dB) frequency response
45W LF plus 25W HF bi-amp system for high-performance 70W power amplification
ROOM CONTROL and HIGH TRIM response controls
XLR and TRS phone jack inputs accept balanced or unbalanced signals

The HS Series embodies the design philosophy on which Yamaha has long insisted for its studio monitors, and is now available as a special paired model that uses selected volume parts. The paired model series bears the designation of MP (Matched Pair), and MP stickers are affixed to the back of each unit. Manufactured at the same time and with paired serial numbers, the HS MP models can play a valued role in your recording, mixing, and mastering work.

Yamaha Pro Audio's history of aspiration and innovation goes back to 1969. Since the creation of Yamaha's first pro audio products (the VA120 and VA180 vocal amp systems), they've repeatedly aspired and innovated to create a wide-ranging lineup for applications including broadcast studios and commercial spaces, such as mixing consoles, power amplifiers, speakers, processors, and immersive sound solutions, each with the aim of becoming the new standard in their respective market.

Monitor speakers are one of the product areas that must be mentioned when speaking of Yamaha Pro Audio's fifty-year history. The NS10M STUDIO which went on sale in 1977 was a studio monitor speaker loved by numerous engineers, and earned a role in studios around the world. In 1998 came the MSP5 powered monitor speaker which focused on providing the painstakingly faithful playback of the original sound that is demanded from nearfield monitors. Subsequently, the MSP/MSP STUDIO series that appeared during the period 2000 through 2008 benefited from a full measure of the know-how and technology that has been accumulated in the field of pro studio monitor design, going on sale as a flagship model that boasted a stunning degree of perfection.

Yamaha have insisted on complete fidelity to the original sound and the ability to reproduce the subtle changes of tone and position in the mix, and these principles are exemplified in the HS series that appeared in 2005 with its bright white cones. As high-bit and high-sampling-rate continue as trends in the field of music production, leading to an increasing need for high-quality nearfield monitors, these speakers deliver the high-quality sound and accuracy that are ideal for the studio environment. In 2013, fusing the know-how and cutting-edge analysis technology that has been developed through many years of studio monitor design, and carefully rethinking every element, the next-generation HS series have been announced, adds yet more polish to the accuracy of these speakers.

Notes: Explore unique sonic possibilities with this semi-modular digital synth, combining physical modelling with spectral sound sources, versatile effects and complex modulators.

Supplier's Notes:
An affordable hybrid monophonic synthesizer that allows you to create new sound universes inspired from the real world, where objects collide, vibrate, and resonate.

Anyma Phi blends the classic ingredients of electronic music with physical modelling technology, allowing it to simulate acoustic sound sources, such as strings or reeds, as well as resonating structures, like wood, glass, or metal.

Anyma Phi is compact enough to stand on your keyboard, or anywhere on your desk, and is compatible with any MIDI controller, such as keyboards, sequencers, or even wind controllers, including Aodyo's own Sylphyo.

Whether you play live or record in the studio, design sounds or play presets, Anyma Phi will become an indispensable tool. It can even be used as a stand-alone effects processor, or as part of a guitar effects pedal setup.

The heart of the Anyma Phi is the matrix, which provides a quick and easy way to explore your sounds by following a physical metaphor, with four macros for each of the five stages of sound generation:

With its matrix, Anyma Phi offers a straightforward way to tweak, explore, and create sound universes. It also provides easy ways to make your sound react to your MIDI controllers with mapping shortcuts. But don't be fooled by the simplicity!

If you want to dive deeper, you can take control of the powerful semi-modular synth engine beyond the matrix, with oscillators covering a wide range of synthesis techniques, effects, and modulators.

By connecting those together, you can create any kind of sound, and control it any way you want.

Anyma Phi offers you:
Up to 3 oscillators (sound sources)- physical models, classic spectral, noise souces, external input
Up to 5 effects: resonators, filers - EQ, pitch shifter, ring mod, delay - reverb, chorus - phaser, drive - folder
Up to 8 modulators: envelopes, LFOs, curves, slew limiter, math & logic

This amounts to 69 different module types available, including 30 sources, 22 effects, and 17 modulators.

Technical specifications:
Hybrid monophonic synthesizer
Stereo audio output:
Two 1/4" mono line jack outputs
One 1/4" stereo headphone jack output
1/4" stereo jack audio input (internal piezoelectric mic when external input unplugged)
MIDI inputs and outputs via USB and DIN ports
Powerful digital semi-modular synthesizer engine :
Memory: 200 patches
3 oscillator slot
5 effect slots along 2 serial buses (Main, Aux) + 1 mono reverb
16 modulator slots, including envelope generators, LFO, curves, interpolators, slew limiters, etc.
32 mapping slots (virtual patch cords), each allowing to control any synth parameter (including another mapping) using a modulator or a controller input, with a sidechain input
Responsive to pitch, pitch-bend, velocity, breath control / expression, as well as 4 other controller inputs

Additional features:
Percussive playing surface
Patch librarian / editor
Extended memory

The percussive playing surface will allow you to tap and scratch your sounds directly on the case, making your performance even more expressive and fun! This would be made possible by integrating a piezoelectric contact microphone into the case. The resulting sound would be available to use on the Anyma as an audio input, ready to be fed into resonators and effects!

You can edit patches directly on your Anyma, as well as send and receive patches via MIDI SysEx. But what about something more comfortable and powerful?

This software will allow you to easily manage and share patches, as well as edit them in depth in a streamlined environment on your PC or Mac, by making all the synth components directly visible and showing their interactions.

With more memory, you can have a huge library of sounds at your fingertips, or you can make many variations of your patches without having to worry about space or having the computer editor around to make backups!

Let's free the Anyma Phi from the shackles of the Western 12-tone equal temperament! A440 be gone!

Notes: Perfect for use with Ableton Live and Traktor, the Killamix-Mini is a compact USB controller housed in a sturdy brushed aluminium case with solid aluminium knobs. It is the perfect companion to your laptop, whether you are using a sequencer, DJ-ing or VJ-ing, just plug in the USB cable and go. Despite having only 9 knobs, 9 buttons and a joystick, the Killamix-Mini can in effect be 144 knobs,144 buttons and a joystick.

By pressing a single knob you can select any MIDI transmit channel from 1 to 9, or, with a combination of two knobs, select the remaining channels 10 to 16. When you select a new MIDI channel, the current values of the knobs for that channel are stored so that they can be restored when you next select this channel, thus avoiding any parameter jump difficulties typical of units with traditional knobs and faders.

When the values are restored, the LED rings around the knobs indicate their new positions.

Notes: Your Palette case is the ideal solution for your space conscious and/or portable needs. It fits comfortably on your desktop; at your favourite coffee shop; in your jam space; or pretty much anywhere else you might desire to play. Your imagination is the only limit. With either 62hp or 104hp of rack space, you can piece together powerful but focused mini systems and control surfaces. Intellijel's 1U row and built-in i/o ports add a ton of extra utility to bring the most out of your eurorack modules. Truly a palette for the sonic artist.

High spec 60 Watt power supply capable of powering up to 24 modules with +12 V output at 1500 mA, -12 V output at 1500 mA and +5 V output at 500 mA.

Notes: The best delay and reverb programs from the Nemesis Delay and Ventris Dual Reverb are combined to create a potent, versatile new pedal. Create soundscapes and ambiences from vintage effects to modern experimentalism.

Supplier's Notes:
Design complex soundscapes in seconds with the Collider Delay+Reverb. Source hand-picked 12 standout delay and reverb effects from the award winning Nemesis Delay and Ventris Dual Reverb, and put them together in one compact housing with massive power and dead simple control. The Collider's intuitive control surface makes it easy to mix-and-match any two-engine combination of delay and reverb. Dual footswitches provide individual Engage/Bypass control over each effect, making it a perfect choice for live performance.

The Collider offers an exceptional collection of rich, spacious tones, including realistic reproductions of vintage Analog, Tape, and Oil Can Delays, classic models of Spring and Plate Reverb, natural replications of large and small acoustic spaces, and an intriguing and highly musical selection of "unnatural" tones including a tripped-out Reverse Delay and an other-worldly Shimmer Reverb.

Collider takes supremely high-end delay and reverb effects and offers them in a sleek and powerful design with massive processing muscle and clean functionality. The Collider features two completely independent 56-bit signal processors, essentially housing a high-powered reverb AND a high-powered delay pedal in a single box. This means that it is possible to create magnificent tones with any two-effect combination of delay/reverb, delay/delay, or reverb/reverb.

This extremely versatile pedal offers a long list of useful features, including analog dry through, stereo inputs and outputs, the option of true or buffered bypass, 8 user presets (or 128 with MIDI), full MIDI functionality, delay tap tempo, reverb hold (a.k.a. "freeze"), external expression capabilities, external preset switching capabilities and extra editing and signal routing options via the Neuro Desktop and Mobile App Editors.

The sound engineering team of Bob Chidlaw and Jesse Remignanti were relentless in their pursuit of perfection with each and every one of the Collider's delay and reverb effects. Whether it's beautifully capturing every minute detail of vintage units or bringing exceptional depth and richness to the contemporary effects, the Collider delivers excellence.

Includes 9v DC power supply (300mA / Negative Tip)
Includes 1/8" to 1/4" cable for Neuro Mobile App connection.
Power Consumption - 300mA
USB port i Connects to Mac or Windows PC for MIDI control of firmware updates.
Brushed anodized aluminum housing.
Dimensions: L: 4.5 in./11.4cm x W: 4.5 in./11.4cm x H: 2 in./5.1cm (including knobs)
Weight: 1 lb./0.45 kg.

Notes: Ten-channel version of one of the most cost-effective mixers on the market. Great sound, good EQ and handy built-in effects. Check out the 12-channel version if you prefer faders for level control.

Supplier's notes:
The Allen & Heath ZED-10FX mixer is an amazing little desk for small band mixing. It is ultra portable for carrying to the gig, and can be used for recording live or in the studio. It comes with configurable USB audio in/out making it easy to capture stereo recordings.

Guitars can be plugged in directly to the mixer using the specially designed high-impedance inputs, while the mixer has two stereo inputs for MP3/CD players or keyboards. Equipped with professional XLR stereo outputs and a flexible monitoring section with headphone and speaker feed outputs. We've added a set of fabulous effects to give shimmering reverbs and enhance your sound.

USB AUDIO FLEXIBILITY
Getting audio to and from a computer easily is now a common requirement for live sound and music production. The way this has been implemented on ZED is super-flexible and super-easy! No longer do you need to fiddle around the back of your PC to get to the soundcard inputs, only to find that the levels are all wrong and noisy. Just plug in a USB lead to your ZED, select the USB routing on the mixer and the device on your computer and that's it! CD quality audio to and from your PC or Mac. Switches and connection through jack socket terminals provide different send/return configurations:-

SEND OPTIONS:
1) Main Mix Left + Right (Post master Level)

2) Aux + FX bus (Aux is a pre-fade send, FX is a post-fade send)

3) Record Bus Left + Right (Separate stereo bus to Main Mix)

RETURN OPTIONS:
1) To Playback input (through jack socket break contacts)

2) To Stereo 2 channel (through jack socket break contacts)

ZED-10FX features a responsive 3-band, swept mid frequency EQ design which utilises MusiQ - with optimised slope (or Q factor) for equalising individual instruments.

ZED-10FX has an essential selection of 16 time-delay effects, designed for small groups who don't want to carry around an effects unit with their gear but who still want great quality FX at their gigs and on their recordings. Our DSP engineers worked hard, crafting and refining beautiful reverb algorithms to enhance every performance. These effects are available nowhere else at this price point - this quality and integration is only available from the ZED-FX. ZED effects are easily controlled using 3 buttons with 9 display LEDs. For example, the ideal delay time can be quickly tapped-in, or the perfect amount of reverb on the lead vocal can be dialled-in. There is one-stop navigation and editing - in fact, it's just as easy as using effects pedals. To alter effects parameters, the TAP button is held down and the up/down buttons pressed to adjust the specific parameter for that effect, for example, the decay length on PLATE, or the depth on CHORUS.

ZED-10FX's pre-amps are similar in design to our MixWizard range of mixers, but with a twist! Inputs 3 & 4 have a high impedance jack input capable of taking either a normal line level or a low level input from a guitar pickup. These newly designed inputs have been crafted with the aim of replicating the sound of a classic guitar or instrument tube pre-amp in a combo or head amp. An extremely high input impedance ensures loading on pick-ups is minimal and a Class A FET (field effect transistor) circuit powered from 48V is employed to give the valve-like gain stage. There is a gain "Boost" switch associated with the guitar inputs which boosts gain by 26dB to cater for instruments with very low level outputs and the overdrive characteristics of the guitar inputs are very similar to a valve (tube) circuit, being asymmetric and soft. All this makes for a wonderfully natural sound to be reproduced from the instrument, full of warmth and character.

The ZED-10FX is bundled with IK Multimedia's AmpliTube X-GEAR software, giving access to superbly modelled amps and effects.

Notes: The 1022GX record cartridge is recommended for the discerning listener. The diamond stylus is a Vital PH type, which provides increased resolution and ensures the maximum accuracy of musical reproduction.

Notes: Erica Synths Acidbox III brings you the core of the famous Polivoks VCF in stereo version with a unique audio signal overdrive circuit, built in LFO and envelope follower in a compact, full aluminium case.

The Acidbox III has adjustable input gain, therefore it works with various sound sources - guitars, units with line level signals (synthesizers, grooveboxes, etc.) and modular synths. Configurable control input allows you to connect a bypass footswitch, expression pedal, external cut-off control voltage source and LFO synchronization trigger. This makes the Acidbox an ideal companion in almost every production or live performance setup.

Notes: The Circadian Rhythms is moving modular synthesizer technology another step forward by gluing all the pieces of a system together. Each module or voice can now be programmed to play straight from an intelligent, eight-channel, 512-step master trigger sequencer made for composers looking to make music on the modular. Building on the sequencing concept of step programing multi-channel patterns of musical phrases can be repeated, looped, chained, muted and manipulated on the fly in real-time, and most importantly, all of this is done through a simple, clearly labeled interface. Using an array of multicolor illuminated buttons and innovative grid views provides a highly functional live performance sequencer with a beautiful glowing appearance of the programmed music that will look amazing on stage for both performer and crowd. As a master controller, the heart of the modular synthesizer, Circadian Rhythms generates high precision clock and reset signals for all the other sequencers and devices in the system to align with and can also act as a high precision bridge for DAW synchronization.

Views - Unlike most hardware sequencers that have a single static display of a timeline, Circadian Rhythms offers four different horizontal views of the timeline and two unique vertical views that scale from macro to micro. Switch between viewing 64 steps at once or all 8 channels side by side instantly. Stretch gates over multiple patterns to drive envelopes or use Zoom view to move a single hit back a few milliseconds in time to get the right feel all from the same interface.

LED Grid Built for Quick Access - Built around 72 buttons set as a multi-color illuminated 8x9 array, Circadian Rhythms displays both note data and settings in a clear and precise manner. It takes only one click to switch to vertical view and the grid turns into a set of programming and realtime playing functions like Mutes, Loops, Swing, Fills, Copy and Pate, Grouping, Randomizing, Manual trigger entry drum machine style and many many more. Activate any of those functions with only a button press or two.

Clock - Inside the CR ticks an extremely precise clock with jitter and latency measured in mere microseconds for the ultimate feel of groove. The four modes of clock sync make interfacing with other modules, hardware or software simple. Whether driving a large Eurorack system or synced to a DAW, the groove always remains tight.

SyncBus Technology - The Tiptop Audio designed SyncBus enables the CR to connect to any number of other SyncBus devices with the highest possible level of synchronization. A SyncBus master directly injects its core clock and running status into every connected unit so they work seamlessly as one device. Hook up two CRs to make a 16 channel device or add a Trigger Riot (or three) to the mix for further experimentation. Plus, the connection is done behind the panel so no need to patch anything together.

Under The Hood - When state of the art chip technology, musically driven firmware, and professionally engineered hardware design all come together in one electronic device, the result is a music sequencer with unparalleled specifications. Starting with a powerful, precise sequencing engine that has superb feel for the groove, add internal functions that automatically balance performance and smooth user interface operation, and finish with outstanding low power consumption placing minimal stress on power supplies even at maximum output, Circadian Rhythms has a design focused on the requirements of the most dedicated musicians and composers. Long time pros will immediately feel a machine made for their needs, while the newcomers can instantly dive into next level programming and performance.

Notes: The definitive MIDI controller keyboard, KeyLab MkII is a luxurious, expressive tool for your studio or live rig. Unsurpassed connectivity, effortless integration, customizable interface, and inspiring included software; there simply is no other MIDI controller quite like KeyLab MkII.

KeyLab MkII is an expressive, versatile, and superbly powerful next-generation USB MIDI controller keyboard. It features dynamic performance and studio controls, including a high quality 49-note keyboard with aftertouch, 16 RGB backlit pads, 9 faders, 9 rotary knobs, and dedicated DAW and transport controls. Its huge connectivity also includes CV/Gate outputs, so you can take command of outboard synth and Eurorack modules with ease. Factor in the amazing included software, and you've just found your ideal creative companion for the studio and stage.

Another level in terms of quality and luxury, KeyLab MkII is a treat for the fingertips and gives unprecedented levels of control over your music and software.

Both 49-key and 61-key versions of KeyLab MkII feature Arturia's Pro-Feel action, the same lusciously playable keybed as the MatrixBrute and MiniBrute 2. Sensitive enough to accurately capture the subtleties and nuances of delicate playing, while still being robust enough to feel the energy of high-impact playing.

Every version of KeyLab MkII also offers 16 RGB-backlit, multi-function performance pads which can be used in a huge variety of ways, whatever suits your performance style or studio needs best. Trigger custom chords, activate samples, quickly switch user maps, KeyLab MkII puts the "control" firmly back into "controller".

A gateway to software, KeyLab MkII features 9 rotary encoders, 9 faders, and a selection of fully assignable buttons to give you unfettered access to your virtual instruments, effects, and recording environment. Send and receive CV/gate data to bridge the gap between modular and MIDI, with a fully customizable setup.

To allow for maximum expression, and to put that unmistakable "human touch" into your music, KeyLab MkII features multiple expression pedal inputs, that can be assigned to whatever parameters you desire in your DAW or virtual instruments, and sports robust, luxurious machined metal pitch and mod wheels. Truly a live-performers dream!

Amazingly versatile, hugely expressive, and geared up to enhance your creativity and workflow wherever your music takes you.

Included is an impressive software bundle: Arturia's complete Piano V virtual piano instrument, Analog Lab 3, and Ableton Live Lite.

Notes: Perfect for adding that final touch to a modular patch, the AJHSynth Finaliser R-EQ module includes seven Mono / Stereo reverb types, along with a four band equaliser and a Sonic Maximiser / Enhancer.

The Reverb, EQ and Maximiser can be used in Mono IN, Mono OUT mode or Mono IN, Stereo OUT modes. The reverb alone can also be used in Stereo IN / Stereo OUT mode too.

The fully analogue four band Equaliser includes three parametric equalisers for Low, Low Mid and High Mid ranges, and the High EQ has switchable shelving of either 2kHz or 5kHz. The Low EQ also includes a shelving mode.

The Maximiser is a fully analogue circuit too, with low and high treatment bands which change the phase and amplitude relationships of the sound to add punch and harmonics and really bring the sound to life in the mix.

The Reverb engine is based on 20 year old DSP technology, harking back to the reverb units which were used extensively on many synth and EDM tracks a couple of decades ago. We have added full control of reverb wet / dry mix, either manually or under CV control.

Notes: Fusion VCO2 is a full analogue sound source with lots of distinct features.

The core of the module is highly stable AS3340-based VCO with three simultaneously available waveforms, transistor-based suboscillator and detune function - two BBD delay lines that make frequency shifter that is mixed back to the principal oscillator in order to emulate two detuned VCOs. Tube crunch - distinct tube overdrive - is added on the top of the mix. Furthermore, Audio input mixes an external audio signal with the principal oscillator which results in crazy sonic experience. Fusion VCO2 is exactly what you need, if you wish to get really low frequencies and have a sound that sets your modular system apart from mass!

Features:
" Full analogue design
" Great tracking over 8 octave range
" Detune function for thickening the sound
" -1 oct transistor based suboscillator
" Tube overdrive circuit
" External audio input
" VCO synchronization
" Simultaneous waveform outputs

Dimensions
14 HP
42 mm deep

Current Draw
228 mA +12V
55 mA -12V

Notes: The Allen & Heath ZED-14 is a fantastic entry-level mixer for small bands, solo performers or AV applications. Its comprehensive feature set, compact size and fine lines combine to make it one of the best small mixers around. Provided with 6 mic or line inputs, 4 stereo inputs with EQ, there are an incredible 157 controls on the front panel of the ZED-14.

This is a mixer for anyone, from entry-level to professionals, who appreciates fantastic sound, rugged build quality and imaginative feature sets. It'll be equally happy running your gig on stage, recording live or mixing down in your studio at home.

USB AUDIO FLEXIBILITY
Getting audio to and from a computer easily is now a common requirement for live sound and music production. The way this has been implemented on ZED is super-flexible and super-easy! No longer do you need to fiddle around the back of your PC to get to the soundcard inputs, only to find that the levels are all wrong and noisy. Just plug in a USB lead to your ZED, select the USB routing on the mixer and the device on your computer and that's it! CD quality audio to and from your PC or Mac. Switches and connection through jack socket terminals provide different send/return configurations:-

SEND OPTIONS
1) Main Mix Left + Right (Post-fade)
2) Main Mix Left + Right (Pre-Fade)
3) Auxes 1-2
4) Auxes 3-4

RETURN OPTIONS
1) To Stereo 3 channel

ZED-10 features a responsive 3-band, swept mid frequency EQ design which utilises MusiQ- with optimised slope (or Q factor) for equalising individual instruments.

Based on the proven pre-amps from the hugely successful PA series, ZED-14 has DuoPre pre-amps, which use a two stage design, with carefully controlled amounts of gain in each stage. When amplifying the signal from the XLR input, the gain range is huge - 69dB of range to be exact - and is very evenly distributed around the gain control, meaning better control of signal level. Most of the gain comes from the first stage, so unwanted noise is kept to a minimum. Line level signals are simply plugged into the second stage of the pre-amp by using the line input jack socket, which has the great advantage of less noise when using the line input and also matching to a higher input impedance.

Notes: This new device is a powerful new CV controlled effects unit for your electronic music setup and pairs extremely well with the KOMA Field Kit.

- Looper
- Frequency Shifter
- Sample Rate Reducer/Bitcrusher
- Digital Delay
- Analogue Spring Reverb
- 4 Channel VCA Mixer
- 4 Step Mini Sequencer
- Envelope Generator

All of this, combined with the new 4 Channel CV Interface which allows you to route four CV signals throughout the device, means an incredible control over sound and timbre and a great addition to your mobile performance rig.

The Field Kit FX is built up from 7 separate functional blocks all focused on mangling and changing incoming audio and CV signals. They are designed to operate together as a coherent addition to our Field Kit Electroacoustic Workstation or alternatively together with other pieces of music electronics with the ability to use control voltage signals.