Laboratorio Elettronico Popolare

Notes: With the latest PCB revision, Lunanoise have added a tree power connector to share the power with another instrument.

Lumamix accept voltage from 12 to 20 volts, the voltage present at the rear power in connector, will be shared with the power out connectors, with one power supply you can now power the mixer and other 3 instruments.

The new LUMAMIX is the latest addition to the Lumanoise family, a four channel RESONANT mixer with send\return and a resonant equalizer, inspired by the Polymoog resonator section.

Lumamix has four jack\mini jack audio inputs, jack\mini jack send\return, the send out is pre the resonant equalizer and the return can be seen as 5- input.

The main output is mono jack or stereo mini jack, all the channels go through the resonant equalizer where you can select the type of filter; low pass, band pass, high pass and the frequency range low, medium, high.

The equalizer can resonate, the cut-off can be controlled via the Light Dependent Resistor, and the LDR can be activated with the switch.

The gain knob sets the level before the equalizer.

Lumamix works with 12v 500ma tip+.

Notes: The new Multicassa is here, we added a snare channel with five dividers, tree trig out and tree trig input.

T3 input can now accept audio, CV and trig signal, while T2 & T4 only trig signal.

Routing an audio signal to T3 in, will give you the possibility to filter it with the Bongo and Legno channel and also trigger the sound.

A new swing switch, change the internal groove, updated clock in, synch to 2ppqn and 24ppqn. Individual audio out for each sound and a mix out.

Notes: Volume 1 pot: regulates the volume for the mini jack input 1.

Volume 2 pot: regulates the volume for the mini jack input 2.

Volume 3 pot: regulates the volume for the mini jack input 3.

Send out the mixer signal before the resonant equalizer, mini jack out, to use with external effect or as mixer dry out.

Return pot: regulate the volume for the mini jack return input, to use with external effect or as a 5- input.

Resomix has one mono mini jack out.

High pass, band pass, low pass switch; selects the filter type.

High, mid, low switch; selects the filter frequency range.

Cutoff pot: regulates the cutoff frequency of the filter, the 0-10v CV input affects the cutoff frequency to obtain the CV in maximum effect keep the cutoff pot to 0.

Resonance pot: regulates the resonance level.

Gain pot: regulates the gain level at the filter input, work as general mixer gain.

Resomix works with a +/-12v 10pin modular connector.

Dimensions

8 HP
38 mm deep