Back in stock: Studio Equipment

Notes: The Befaco Synth Duster is a super soft brush to keep your modular synth and audio equipment far away from dust.

Notes: This module has 1/8" jacks to accept either mono or stereo audio signals from your modular gear.

It features input level indicator LEDs, and contains all the gain control circuitry necessary to drive external audio gear at the proper levels.

A ribbon cable is included for connecting it to either the Stereo Out Jacks 1U module, or a compatible Intellijel case with 1/4" jacks (e.g. 7U x 104HP, 7U x 84HP, or Palette 62).

Notes: Really versatile little MIDI controller designed to add hands-on control to software and even hardware. 16 push-button rotary encoders plus function buttons and OLED display.

Supplier's notes:
This all-rounder has 16 gridless push-encoders, 7 function buttons and a large OLED-display. Encoders are switchable to 16 groups that allow controlling a total of 256 control parameters per setup. The display shows the current values of all controls or editable encoder/group/setup names. Various kinds of MIDI commands are possible, like program change, pitch bend, aftertouch, NRPN, and control change in relative and absolute mode with different acceleration amounts. All these properties are easily and efficiently programmable on the device, allowing personalized customisation for each separate control.

The encoders can work as high resolution 14bit controllers too (NRPN, control change or pitch bend). This makes them suitable for sensitive parameters like resonating filter cutoffs, etc.

Use the internal 16 setups to save your individual settings. Backup and restore of all settings by SysEx dumps are possible too.

The factory settings are perfect to control music and video software products out of the box. Thus, any additional device programming isn't necessary for many applications.

The little box is also a great extension for your Ableton Live setup. There you can control all the continuous parameters like track volumes, rack macros, send amounts, and track pannings. A special control surface script for Ableton Live, including all necessary mappings, is enclosed in the package.

Working with this amazing power box will prove to you that it is a trustworthy, reliable, and invaluable asset to your productions.

Notes: Mixup is a versatile, expandable audio mixer for Eurorack format. It has eight inputs (6 on the front panel) and two outputs. Inputs 1 and 2 are single-channel mono inputs, each with its own mute switch and level control; Input 3 is a dual-channel stereo input with a shared mute and level control; and input 4 is an auxiliary unity-gain, non-mutable stereo input.

Using bus connectors on the back panel, you can chain multiple Mixups together in series, giving you the ability to mix together even more inputs, or to create sub-mixes for routing around larger systems.

Because Mixup is designed specifically for audio (and not for CV mixing), it uses AC-coupled circuitry (which reduces the potential for 'pops' when muting and unmuting audio), and it uses audio-grade, logarithmic attenuators for a smooth, even response across the entire volume range.

Notes: Noise Random Tools comprises a collection of useful utility blocks that you could use in many of your patches - Clock, Random Pulse, Analog Noise, Sample and Hold, and Slew.

Features:

- Clock and Random pulse source with adjustable rate
- Analog pink and white noise source with very accurate spectrum
- Analog sample / track and hold with very low droop
- Analog slew with adjustable slew rate

Notes: The Voltage Controlled Amplifier or "VCA" is one of the most essential and useful building blocks in a synthesis patch. The DUAL VCA 1U packs two high quality, DC coupled, linear VCAs into a very compact 1U package.

The two VCAs can be used completely independently or in tandem via the handy signal normalling. The DC coupling means that the VCA can be used for the amplitude control of both control voltages (CV) and audio signals.

Some application/use examples:

- Dual, independent VCA for dynamic level control of two different audio or cv sources
- Stereo VCA (use the CV normalling where CV A normals to CV B) for processing stereo sources or CV pairs.
- CV/Audio summing (when Out A is not patched, it normals to sum with OUT B, CV A and B control the independent levels)
- Voltage/signal doubling (use input A only and the doubled voltage will appear at OUT B when a CV of +5V applied to CV A)

Notes: The UDG Ultimate DIGI Backpack Black/Orange Inside is specially designed to cater for the laptop-based generation DJ affording them maximum functionality with performance orientated style.

Fits: Pioneer DJM-S5, DDJ-XP2, DDJ-200, Akai MPC Live II, NI Maschine MK3/ Jam, Numark Scratch, PT01 Scratch, or similar size controllers.

Ultimate DIGI Backpack specially designed for the laptop DJ. Constructed from high quality water resistant Nylon, it contains a cleverly designed side entry compartment for a laptop up to 15.4" without having the hassle of going through the main body of the bag. The bag main compartment can hold an extra laptop and it can also hold a Native Instruments MASCHINE MK2 size MIDI controller. There is a detachable interface pouch and on top of the bag there is a padded, quick access headphone pocket. There are 5 zipped compartments to securely store USB sticks, SD cards, wires and cables, AC power adapters, compact camera's, MP3 player, and other accessories.

Specifications

Colour: Black, Orange inside
Weight: 1,80 kg / 3.96 lbs
Outer Dimensions (W x H x D): 43.0 x 31.0 x 28.0 cm | 16.9 x 12.2 x 11.0 inch
Inner Dimensions (W x H x D): 42.0 x 30.0 x 13.0 cm | 16.5 x 11.8 x 5.1 inch
Material: Water Resistant Nylon 450D
Protection: Various padding used

Extras

Front compartment with organization panel and detachable pouch for audio interface
5 exterior pockets for personal essentials, including one with earbud pass-through for Mp3 players
S-curved shoulder straps for ultimate comfort.

Fits:

Up to 15.4" laptop, LP's
Pioneer DJM-S5, DDJ-XP2, DDJ-200, DDJ-XP1, DDJ-SP1, DDJ-WeGO 3/ 4, Toraiz Squid
NI Maschine MK3/ Jam/ MK2
Denon DJ MC2000, SC2000
Akai MPC Live/ II, MPD226, MPD232, MPD32, MPD26, MPK Mini MK II, MPC Element, MPC 500, APC 20, APC Key 25
Ableton Push/ 2
Allen & Heath Xone 23/ C, Xone 43C
Novation Launch Control XL, LaunchPad Pro, Circuit, Twitch, Numark Scratch, Omni Control, Stealth Control, Party Mix, iDJ Live II, Mixtrack Edge
Reloop Beatmix, Digital Jockey III/ II, Mixage IE, Neon
Roland Aira MX-1, TR-707, MC-202, TR-8, TR-8S
Korg MicroKey 25
M-Audio Oxygen 25, Trigger Finger Pro,
Arturia Drumbrute
Gemini FirstMix Pro, Slate2, Slate4, CDJ-700,
Hercules P32 DJ Controller, Universal DJ, DJ Consule 4-MX, DJ Control Air S, DJ Control Wave, DJ Control Instinct
Livid CNTRL:R
Stanton DJC.4
Vestax Spin 2, VCI-300/MK2, VCI-100/MK2
Audio interface or MP3/MP4 player, books and magazines

Notes: More knobs than you can shake a stick at. Add hands-on control to pretty much any MIDI-equipped hardware or software. Upgraded version of the classic PC44, featuring a whopping 72 rotary pots and 12 buttons.

Supplier's notes:
PC12 as successor of the PC44 is a universal controller for all kinds of MIDI controllable hardware and software.

You can combine two or more NEW MODULE devices to create a large system. The connections are on the right side to allow a back to back placing of two or more devices. Connect two NEW MODULES by a special extension port.

Furthermore, there are 4 MIDI-ports and one USB-port with various routing possibilities.

It is packed in a metal case with the same dimensions like the famous ELEKTRON devices so it's a great extension for these devices. But you can use the pot controller also with your DAW like a classical 12-track-mixer.

The device has 72 standard pots and 12 buttons in a 12-track-layout, various kinds of MIDI commands like control change, note on/off, pitchbend, aftertouch and program change are possible. You can program every MIDI command for every separate control on the device very fast and easily.

Of course you can assign the pots and keys to any of these commands by learning incoming MIDI commands, which is the same procedure you know from your software/DAW. The pots work with standard resolution of 7 bit to have full compatibility to any software and hardware instrument, effect and DAW. Use the internal 30 setups to save your individual settings. Backup and restore of all settings by sysex dumps is possible too.

The factory settings are perfect to control music and video software products out of the box if they are freely assignable. So any additional device programming isn't necessary for many applications.

Some special setups are preconfigured for use with ELEKTRON RYTM and ABLETON LIVE.

Check out this amazing power box and you will get a reliable mate...

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: Blank panel for Intellijel 1U spaces. Made from high quality brushed aluminium that matches the 1U modules.

These can also be used for DIY purposes if you drill/mill them to fit your own custom circuits.

Comes with 2 screws.

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: Triplatt is a three-channel active/buffered attenuverter and summing mixer. Each channel has a knob, which can function as a unipolar attenuator or a bipolar attenuverter, depending on the setting of its corresponding two-position polarity switch.

Each input is normalled to a built-in precision +5V DC voltage source. With nothing plugged into the jacks, each knob controls a voltage range of 0 to +5 V or -5 to +5 V depending on the position of the channel polarity switch. Outputs A and B are also capable of a range of 0-10 / -10 to +10 when using the special function switches.

Each output is normalled to mix into the output of the channel below, making it possible to do sub mixes in groups of two or three.

In addition, each channel has a "special function" switch to alter its input voltage in a specific way. Channel A has a 2x voltage multiplier switch, allowing you to double the voltage sent into Channel A. Channel B has a +5V switch, allowing you to add 5V to whatever voltage is sent into Channel B. Channel C has a mute switch, allowing you to completely turn off the signal being sent into Channel C.

Notes: *** NO POWER SUPPLY INCLUDED - USES GENERIC 12VAC ADAPTER ***

Basically, the Ekdahl Moisturizer is a spring reverb where the springs are exposed so they can be played/hit/fiddled with. As well as being capable of creating sound in itself, you can of course also play sound through the springs like a regular spring reverb - this makes for happy-fun-time finger-modulation of the reverb on whatever audio that's going through it. On top of this there's an analog multimode filter that can be used to attenuate or exaggerate certain frequencies in the sound, this is real handy while playing the springs as you can - for instance - cut all the highs and just make thunderous doomy sounds or do the opposite; cut all the lows and make that ear piercing high frequency special love. Also, it incorporates an LFO that's internally routable to the filter and that also has some external routing-stuff. The Ekdahl Moisturizer has tons of CV / Expression pedal options on the back for even more hillarious moments. The Moisturizer is a mono unit.

The Moisturizer was developed with the help of Jason Willett (Half Japanese, Leperchaun Catering), Martin Schmidt (Matmos, Instant Coffee), Joshua Atkins (Polygons, Major Powers), mom & dad and many more.

The Ekdahl Moisturizer contains exactly:
Preamp (up to 10 times gain)
Reverb
Reverb / Preamp wet/dry crossfader (Knob & CV/EP controllable)
State variable filter with
Lowpass/Bandpass/Highpass seamless crossover (Knob, CV/EP & LFO controllable)
Cutoff (Knob, CV/EP & LFO controllable)
Resonance (WITHOUT resonance limiter)
LFO with
Speed control (Knob & CV/EP controllable)
Square / Triangle crossover
External output with output amplitude knob
Filter / No filter wet/dry crossfader (Knob & CV/EP controllable)

The preamp section is designed for a max of 10 times gain, this to accomodate for low level output instruments such as guitars etc. The reverb tank has normal reverb signal gain on it, meaning that if you hit the springs hard they'll distort like crap which is real nice, if you hit them softly the sound won't be distorted.

The filter in the Ekdahl Moisturizer is abrasive, the fact that it doesn't have any resonance limiting makes it possible to get the filter to sound *really* bubbly & metallic (way more then any filter i've ever heard), but it's also of course capable of sounding completely "normal" - it all depends on the amount of resonance and/or gain. The fact that you can seamlessly fade inbetween lowpass, bandpass or highpass filter (or lowpass+bandpass and highpass+bandpass) makes the unit pretty damn versatile and by using the wet/dry filter/no filter crossfader there's some neat shit that can be done too. Now it should be said that due to the fact that there's no resonance limiter, if using very high gain, with high resonance and turning the cutoff frequency very high the filter might cut out - not to worry, just turn the cutoff back a bit and the filter pops in again. This happens because the filter gets overloaded and can be avoided with a resonance limiter, however if i had one of those all the super-awesome bounce would be gone and it'd sound like all the other filter out there.

The Ekdahl moisturizer has six CV/Expression pedal related jacks on the back, one of them is a LFO output so you can control other shit with The Moisturizer's LFO. All the other jacks are inputs and takes either CV or Expression pedal, they are: Reverb Mixture, VCF Cutoff, VCF Filter Mode (LP/BP/HP), Filter Mixture and LFO Speed.

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: Outs enables your modular system to output both professional and prosumer compliant audio, and send it to external amplifiers, mixers, recording devices, or DAW interfaces. Using the L+R Level knob, it scales modular-level voltages down to the level required to drive external gear at either the +4dBu balanced professional line-level standard or the -10 dbV unbalanced standard.

Headphone monitoring is also provided via a low noise built-in headphone amp (with its own independent level control), capable of driving a wide range of impedances - from studio grade headphones to portable style earbuds.

To use Outs, simply connect the final output of your patch to the 1/8" inputs (where the built-in activity LEDs light up to indicate the presence and intensity of the input signal). The left input is normalled to the right, so you can create a stereo signal from a mono source. Or if you have an Intellijel Mixup, you can remove a jumper from its rear panel, and connect it to the Outs module using the 3-pin link cable included with the Mixup.

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: Control the expression inputs of your effects with Old Blood Noise's clever Ramper. Glide or step between two adjustable expression settings. A cheap and effective way to expand creative options.

Supplier's Notes:
Expression Ramper - Parameter Mover

Simplicity is the heart of innovation. This is exactly what the Expression Ramper from Old Blood Noise Endeavors offers - a super simple, yet highly innovative way to automate expression control, letting you conjure sounds you never thought possible from any pedal with an expression input. It's time to release your Inner-Ramper!

The Expression Ramper allows you to pick two expression settings and move between them, either in one motion or as a continuous LFO activated by a single footswitch. Just hook up the Expression Ramper to your expression-enabled effects pedal, simply pick your first expression setting in the A position, then your second in the B position and you're good to go.

From here, you can set Expression Ramper to move between A and B in three different ways. In TRI mode, it glides in a linear Triangle wave sweep from A to B, while in SQR mode it will make instant Square Wave jumps. Both TRI and SQR are LFO modes - you start the LFO when you hit the footswitch once, then stop it as you press the switch again. Alternatively, A<>B mode triggers a cool one-shot sweep, where every press of the footswitch jumps from one position to the other. The speed of the LFO and One-Shot movement is set via the Rate knob.

These simple and intuitive features can unlock worlds of sound. For instance, if you have Expression Ramper hooked up to a pitchshifter, you can create classic Whammy-like octave glides in one-shot mode, stretchy modulation in Triangle wave mode or hypnotic pitch sequences in Square wave mode. Got an expression-enabled phaser? Turn it into a step-filter with Expression Ramper's square wave. Or maybe an expression-enabled delay pedal? Use Expression Ramper to create swelling Feedback waves in Triangle mode or jump between two preset delay times in one-shot mode. The list goes on and on and the possibilities are basically endless.

While it should suit most effects pedals right out the box, Expression Ramper can easily be configured for different polarity or types of expression pedal simulation by using the internal jumpers. Plus, you can even change the supplied internal 50K digital socketed potentiometer and replace it with one of 10K or 100K values if needed. This enables the pedal to be specifically tailored for whatever expression-enabled devices you might have like keyboards, synths, vintage gear or more esoteric sound devices. All of this goodness is packed into a highly compact enclosure, ensuring that you can fit the Expression Ramper (or several Expression Rampers) into any setup.

Notes: Open up your signal routing options with this neat and simple pedal. Split one signal into three, run effects in parallel, mix three signals together, set up ABY routing or set levels. Versatile.

Supplier's Notes:
The Signal Blender provides a number of parallel routing solutions through its use of a pair of send/returns, primary input and output, switching, and volume control.

Signal Blender can be used as a:
Parallel effect blender
3-to-1 mixer
1-to-3 splitter
Active ABY in either direction
Volume level setter

and more.

A courtesy 9V power outlet and phase correction switches for both Sends add further versatility to this box. Clever switching allows for latching or momentary on/off action.

The Signal Blender uses standard 9V center negative power, and has a current draw of 31 mA.

Notes: The DS01 is the second-generation clone of the most classic dub siren in the known universe, old school transistors sound FX machine with unique feel and sound.

Audio output: impedance balanced 1/4" TRS Jack

DC Input: 12VDC, 500mA, centre positive, 2.1mm x 5,5mm barrel type connector

Dimensions: 120mm x 90mm x 40mm

12VDC 1A power supply included.

Notes: This is the main module of the mixer and the only indispensable one, the only one that needs the eurorack power cable. It provides power to all the other modules and contains the summing circuit for all channels in every audio bus.

32 mA +12V
32 mA -12V

Notes: Mix up to four stereo channels in just 4hp, or chain multiple modules together to add channels. Inputs are normalled for mono operation. Simple, compact and high quality at a reasonable price.

Supplier's Notes:
4xSt.Mixer is 4 HP quad stereo mixer.

Right inputs are normalled to Left inputs for easy mono operation

Several 4xSt.Mixers can be chained together or with other HN stereo modules via sockets on the back side

65 mA +12V
50 mA -12V
35 mm deep

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: The classic dub siren, updated and improved. Machine-gun/laser-gun and airhorn sounds with modulation controls and tough build quality for use in live settings.

Supplier's Notes:
Our take on one of the most iconic dub sirens

-Classic machine-gun/laser-gun sound FX

-Brand new airhorn-like sound FX

-Modulation speed and frequency pitch control

-3 Base frequencies for the audio oscillator

Classic laser-gun sound FX machine

SPECIFICATIONS
Audio output: impedance balanced 1/4" TRS Jack

DC Input: 12VDC, 500mA, centre positive, 2.1mm*5,5mm barrel type connector

Dimensions: 120mm*90mm*40mm

12VDC 1A power supply included.

Notes: Creatively inspiring business from Xaoc as usual. The Erfurt is a digital phase accumulator, digital oscillator, binary counter or clock/audio frequency divider. Versatile stuff.

Supplier's Notes:
Xaoc Devices Erfurt is a digital module that may be used as an 8-output clock and audio frequency divider, a bi-directional binary counter, or a component of the Leibniz binary system, i.e. a programmable digital oscillator.

Erfurt features an 8-bit register which holds its current state: an 8-bit number representing digital values from 0 to 255. The state is available at the front panel via eight binary (5V gate) outputs and reflected by the 8 status LEDs. There are three clock inputs: one incrementing the state at each impulse, one decrementing, and one resetting the state to zero. The state may also be changed manually with two buttons.

When operating alone, the state of Erfurt changes by 1 at each impulse from the clock inputs, so that it counts from 0 to 255 in a cycle (modulo 256). This yields the signal frequency divided by 2, 4, 8, etc. up to 128, available at individual bit outputs. Depending on which clock input is used, the clock patterns correspond to the so called mathematical or musical divisions of the rhythm.

With two different clocks patched to the inputs, the counter alternately increases and decreases its state, and ultimately it counts with a rate proportional to the frequency difference between the clocks. A third clock patched to the Reset input may be used to shorten the sequence thus making the cycle incomplete for even more rhythmic diversity.

When there is a Leibniz data source connected at the back (even as simple as Lipsk), the state increases or decreases in larger steps, depending on the data present at the Leibniz bus (eg. the value programmed by the Lipsk buttons). The counter overflows quicker, and produces more complex patterns.

The state of the counter may be used as a phase input to a digital wave table. Connected to other Leibniz modules, Erfurt may play various roles, eg. it may scan waveshapes in Jena, produce stepped voltages useful for making interesting glissandi with Drezno and any VCO, generate gate patterns animating the spectrum of Odessa harmonic banks, spawn pseudo-chaotic sequences when fed back to Lipsk, etc. Since Erfurt is based on CMOS logic (no CPU!), it can be clocked at very high frequencies (exceeding audio rate), therefore some selection switches are provided for clock pre-scaling.

Dimensions:
6 HP

Current Draw:
25 mA +12V
30 mA -12V
0 mA 5V

Notes: We took the Big Muff Pi circuit and simply shrunk it without changing its rich, creamy, violin-like sustain and sound!

The EHX Nano Big Muff Pi works and sounds identical in every way to our classic NYC Big Muff Pi. Get a piece of the pi for yourself!

Crushing distortion
Singing sustain with attitude
Compact, rugged nano enclosure
True bypass
Adjustable tone
9V battery included

Specifications:
Circuit
Analog
Bypass
True Bypass
Audio
Mono
Power Supply
9V battery included (optional 9.6VDC-200mA power adapter not included)
Dimensions (in)
4.5 x 2.75 x 2.1
Current Draw
3mA
Year Released
2013

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: MX12 as successor of the UC44 is a universal controller for all kinds of MIDI controllable hardware and software.

You can combine NEW MODULE devices to a large system. The connections are on the right side to allow a back to back placing of two or more devices. Connect two NEW MODULES by a special extension port.

Furthermore, there are 4 MIDI-ports and one USB-port with various routing possibilities.

It is packed in a metal case with the same dimensions like the famous ELEKTRON devices so it's a great extension for these devices. But you can use the mix controller also with your DAW like a classical 12-track-mixer.

The device has 24 standard pots, 12 Faders and 24 buttons in a 12-track-layout, various kinds of MIDI commands like control change, note on/off, pitchbend, aftertouch and program change are possible. You can program every MIDI command for every separate control on the device very fast and easily.

Of course you can assign the pots and keys to any of these commands by learning incoming MIDI commands, which is the same procedure you know from your software/DAW. The pots work with standard resolution of 7 bit to have full compatibility to any software and hardware instrument, effect and DAW. Use the internal 30 setups to save your individual settings. Backup and restore of all settings by sysex dumps is possible too.

The factory settings are perfect to control music and video software products out of the box if they are freely assignable. So any additional device programming isn't necessary for many applications.

Some special setups are preconfigured for use with ELEKTRON RYTM and ABLETON LIVE.

Check out this amazing power box and you will get a reliable mate...

Notes: Inspired by the legendary UDG ProducerBag, the UDG Ultimate ProducerBag Large has been created to cater for those electronic musicians who crave more space for their performance equipment.

Fits: Pioneer DJM-S5, Toraiz SP-16, Denon DJ Prime Go, Novation AFX, Akai MPC Live II, Reloop Elite, Rane Seventy, Seventy-Two, NI Maschine Jam, and various pedalboards

The UDG ProducerBag Large offers increased space for performers using laptops up to 18.4" and larger MIDI Controllers. Constructed from high quality fabrics, the backpack style UDG ProducerBag Large features padded walls with an adjustable divider to create an internal partition to suit your own requirements. Available in black, the bag offers both comfortable transportation and padded protection for your valuable items.

Specifications

Colour: Black, Orange inside
Weight: 3,25 kg / 7.15 lbs
Outer Dimensions (W x H x D): 56.0 x 45.0 x 18.0 cm | 22.0 x 17.0 x 7.1 inch
Inner Dimensions (W x H x D): 46.5 x 32.0 x 15.0 cm | 18.3 x 12.6 x 5.9 inch
Material: Water Resistant Nylon 420D
Protection: Padded MIDI Controller compartment
Bottom guards fabrics protect from scuffing and abration.

Extras

6 pockets for Accessories and smaller gears
Top carry handles
Ergonomic detachable shoulder strap
Integrated combination lock.

Fits:

Up to 18.4" laptop
Pioneer DJM-S5, Toraiz SP-16, DJS-1000, DJM-750MK2
NI Traktor Kontrol S2 MK2, Maschine Jam/ MK3/ MK2, Traktor Z2
Denon DJ Prime Go, MC6000 MK2, MC3000
Numark iDJ Live II, Mixtrack II / Pro II
Rane Seventy, Seventy-Two
Akai MPC Live II, APC 40 MK2, MPD232, MPD26, MPD32
Reloop Elite, Beatpad/2, Beatmix, Digital Jockey-3, Jockey 3 Remix, Terminal Mix 2
Novation AFX, 25SL MK2, Launchkey 25, Nocturn 25
Hercules DJConsole RMX2, DJControl Jogvision, DJ Control Air+ S
M-Audio Oxygen 25, Trigger Finger Pro, Xponent
Stanton SCS.4DJ, DJC.4
Livid OHM 64
Vestax VCI-380/400/400DJ,
Arturia Drumbrute, Keylab 25
Various pedalboards

Notes: Updated expander module for the Moskwa II sequencer. The Ostankino adds additional connectivity to the Moskwa II, allowing CV control of most parameters, plus extra outputs.

Supplier's Notes:
Ostankino II expander adds CV inputs for many Moskwa II functions, as well as a transpose input, clock out and individual gate/bit outputs for each step.

Notes: Amazing analogue delay plus chorus and vibrato!

The EHX Memory Boy straps on the cape and flies with heritage into the search for amazing sound at a price that mere mortals can afford.

The Memory Boy uses the Deluxe Memory Man as a base, expanding upon it with additional modulation features and an optional Expression Pedal input allowing external control over Delay Time or Modulation Rate.

The Memory Boy carries the performance heritage for warm analogue delays and modulations that made its ancestors the go to legends that remain today. With two years in design, the focus was making the legend affordable to every musician while maintaining the character and artistic sounds that let you stand apart.

All analogue delay with Feedback
Up to 550 ms delay time
Selectable Chorus or Vibrato modulations rates
Choose between triangle or square modulation waveforms
Expression pedal control of delay time or modulation rate (expression pedal extends the range of modulation rate)
True Bypass
Power adapter included

Specifications

Circuit: Analogue
Bypass: True Bypass
Audio: Mono
Power Supply: 9.6VDC-200mA power adapter included (optional 9V battery not included)
Dimensions (in): 4.75 x 4 x 2.25 121 x 102 x 57
Current Draw: 60mA
Year Released: 2009

Notes: Dynamic hold effects are the aim with this creative reverb pedal. Three reverb modes (tape, comb filtering and resonant bandpass filtering) can be frozen and triggered to create infinite sustaining textures.

Supplier's Notes:
Dynamics. It's the shifting ebb and flow of the tide. It's the ups and downs of life. It's witnessing night turn into day, as the sun attacks and sustains through the nightly veil, making the darkness release its gloomy grasp and decay. It's where you'll find the Old Blood Noise Endeavors Sunlight Dynamic Freeze Reverb. An envelope triggered multi-mode reverb with the ability to dynamically freeze and sustain your notes forever, seeing you create truly mesmerising sunlit soundscapes.

Building on what made OBNE's top-selling Dark Star such a stellar early-chain pad reverb, Sunlight twists it into the other dimension as a reverb pedal centred around the idea of a dynamic hold. When you play, your new notes are let through and old notes are allowed to fade away, but when you stop playing, old notes have the chance to repeat forever.

A dead simple to use interface of just two knobs controls the nature of this relationship. In addition, there are three sonic modes that highlight modulation, comb filtering and resonant bandpass filtering, each of which takes their own spin on the reverb signal. The Mix, Input and Decay controls work exactly the same across each mode, as they help control the dynamics.

Mix sets the loudness of the reverb, which goes from all dry to all wet and anywhere in between, allowing you to create everything from subtle reverberations to deep ambient textures. Now, the interplay between Input and Decay is where the real Sunlight magic starts to happen. Decay determines how long the reverb trails will sustain, which will go from quick ephemeral evaporations to infinite reverb pads. On the other hand, Input controls how much of your signal is allowed into and fed back within the reverb. At zero, no new input will be added to your reverb, but as you increase it, more signal is let through, letting you create gently evolving ambient textures or drastically changing synth-like pads.

Rate and Depth are mode-dependent controls. TAPE Mode is a modulated reverb inspired by the unexpected shifts of a tape machine wobbling. Here, Rate and Depth set the speed and intensity of the lopsided vibrato applied to the reverb signal. COMB Mode is a combination of reverb and delay. Four delay lines are placed after the reverb, and the emphasis on stacked short delays creates comb filters like a fixed flanger. Rate sets the time of all four delays, and Depth sets the feedback (or resonance) of the delay section. PASS Mode is a bandpass filter applied between two reverb paths, where a random sample-hold function sets the cutoff frequency of the bandpass. Rate sets the timing of the sample-hold and Depth sets the range of possible cutoff frequencies. If Rate is set to 0, Depth sets a fixed cutoff frequency.

But the sound shaping adventure doesn't end here. Sunlight also contains a bunch of expressive capabilities performed through the on-board ALT switch, which can be set to change control settings either momentarily or latching. It can be assigned to the Rate, Depth, Decay or Input controls or any combination of the four. You can also control them externally via an external expression pedal, the OBNE Expression Slider or even the OBNE Expression Ramper, which will open up even more creative possibilities.

Dimensions:

Product Height (cm): 5.800
Product Width (cm): 6.600
Product Depth (cm): 12.000
Product Weight (kg): 0.300

Box Height (cm): 7.800
Box Width (cm): 8.200
Box Depth (cm): 14.400
Boxed Weight (kg): 0.453

Notes: The new, 2nd generation Audio Jacks Board comes pre-installed in every Intellijel 7U case manufactured since early 2019. Because this board is more fully featured than the previous generation, it's available as a stand-alone component for anyone who wishes to update an older 7U case.

You can tell which board you have by looking at the connectors. The new Audio Jacks Board has a large shrouded header flanked by two smaller shrouded headers, flanked by two link connectors at either end. Older boards have only one connector along the bottom edge.

The board holds four Neutrik TRS jacks, each of which can be configured as either an input or an output depending on the modules you connect. This allows you maximum flexibility when configuring your case - whether you wish to use the audio jacks as outputs, inputs, sends & returns; or some combination of these.

The jacks carry different audio signals depending on what you connect to the Audio Jacks Board. Please refer to the manual for more details on the many options available.

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: Module A-192-2 contains two independent CV/Gate-to-Midi/USB interfaces. For each of the two sub-units these inputs are available:

- Gate Input (min. +5V)
- CVN Input (defines the Midi note number), 1V/octave standard, range 0...+10V (i.e. 10 octaves)
- CVV Input (defines the velocity value assigned to the Midi note message), can be used alternatively for Midi volume (CC#7), range 0...+5V
- CVC Input (free assignable to any Midi control change number), range 0...+5V

For both sub-units a common CV Transpose input is available (1V/octave, range 0...+10V). The voltage applied to this input is added internally to CVN before the Midi note number is generated. It can be used e.g. to transpose two sequences simultaneously by one voltage.

How it works:

Whenever the rising edge of the Gate input is recognized a Midi note on message is generated. The note number corresponds to the sum of the voltages applied to the CVN input and the common CV Transpose Input that is present at the rising edge of the gate signal.

Notes: Lipsk facilitates the inversion of the individual bits produced by Drezno (or any other module connected to its input header at the back), and delivers the resulting code to its output header. Bit inversion can be manually controlled by pressing any of combination of its eight illuminated buttons, or it can be automated by patching gate signals into its gate input sockets. An active (5V) gate flips the state of the respective bit. If the button is active (bit already flipped), then the gate flips the bit again yielding double inversion (no inversion). The corresponding LEDs show the combined effect of both manual and gate actions. The bit processing logic is hardware-based, so there is virtually no latency, allowing the binary signals to be manipulated at extreme rates.

Notes: Next-gen version of the popular iRig Pro Duo offers versatile recording options in a compact, portable package. Two mic/line inputs with phantom power, stereo line outputs, headphone out and MIDI in/out.

Supplier's notes:
IK Multimedia introduces the iRigr Pro Duo I/O, an enhanced, ultra-compact 2-channel audio/MIDI interface that enables high-quality recording on the go with iPhone, iPad, Android devices and Mac/PC. Designed for musicians, podcasters and other content creators, it can accommodate a variety of input sources including microphones, MIDI controllers, line-level and high-impedance instruments such as guitars, basses and keyboards, and more. It can also be used as a MIDI interface.

A sequel to IK's acclaimed iRig Pro Duo, the new iRig Pro Duo I/O features updated mic preamps with increased gain, as well as the addition of a USB-C cable to work with all of today's latest devices and new, dedicated PC drivers to ensure optimal performance on laptops and Surface tablets. In addition, refined volume controls with level indicators for more convenient workflow and a new rubberised finish to better stand up to the road, offer the same standard of quality customers have enjoyed from IK's award-winning iRig Pro I/O single-channel interface.

Recording capabilities
Two analogue combo inputs (1/4" / XLR) are provided for connecting and simultaneously recording any combination of dynamic and condenser microphones and instruments (line level or Hi-Z). They are complemented by Class-A preamps, adjustable gain and 48V phantom power. Each channel has its own input gain control for dialling in the perfect amount of input signal for a particular recording.

iRig Pro Duo I/O can also be used as a MIDI interface via MIDI input and output connectors and included breakout cables. Additional connections include two balanced 14" outputs and headphone output.

A direct monitor switch provides latency-free monitoring of direct incoming signal for use with video or streaming apps, or lets users monitor the processed signal returning from their device when recording music or using audio processing apps.

Out-of-the-box performance
iRig Pro Duo I/O runs on USB bus power or 2 AA batteries (or an optional PSU), and includes Lightning, USB-A and USB-C cables to work with any device right out of the box.

Although compatible with any app designed for high-quality digital audio input for recording or creation, iRig Pro Duo I/O comes with free access to over $/€500 of IK software, apps, and in-app material, making it an all-in-one package with everything needed to record, edit, and share great music, podcasts, interviews and more.

About the iRig series
Celebrating its 10th anniversary in 2020, IK's iRig series of interfaces helped define the mobile music-making category. With products designed for guitarists, vocalists, broadcasters and social media journalists, the series makes high quality audio recording accessible to everyone at an affordable price.

Notes: Bananuts are anodized aluminium custom minijack nuts, following Buchla/Serge colouring code: Blue, purple, red, orange, yellow, white, green and black. Perfect lovely thingies to pimp your modular, code your inputs and outputs with colours or just give a touch of beauty to your favourite gear!

Notes: Bananuts are anodized aluminium custom minijack nuts, following Buchla/Serge colouring code: Blue, purple, red, orange, yellow, white, green and black. Perfect lovely thingies to pimp your modular, code your inputs and outputs with colours or just give a touch of beauty to your favourite gear!

Notes: Bananuts are anodized aluminium custom minijack nuts, following Buchla/Serge colouring code: Blue, purple, red, orange, yellow, white, green and black. Perfect lovely thingies to pimp your modular, code your inputs and outputs with colours or just give a touch of beauty to your favourite gear!

Notes: You're a visionary videographer, an intrepid journalist, a dedicated podcaster. And when you're out in the field, you want to be able to record high-quality audio for your projects with the hands-free convenience of a lavalier microphone, and you want to do it without breaking the bank.

That's where iRig Mic Lav comes in, it's an ultra-affordable and compact professional-quality mobile lavalier microphone for iPhone, iPad, iPod touch and Android.

iRig Mic Lav is chainable. That means it can double your recording power by letting you easily chain up to two iRig Mic Lav's to the same device. Each iRig Mic Lav captures high-quality audio thanks to its omnidirectional condenser capsule and foam pop shield. And recording convenience is taken to the next level thanks to its on-board headphone monitoring output, secure mounting clip, generous cable length and durable roadworthy design. And best of all, you can have all these premium features at a price as small as the device itself.

iRig Mic Lav gives you the power to record great sounding audio anytime and anywhere. Designed to meet the exacting demands of broadcast professionals, its omnidirectional condenser capsule lets you capture a 30Hz - 16kHz frequency range of crystal-clear audio from all directions. It comes with a foam pop filter to eliminate vocal plosives, wind noises and other unwanted sounds. And like all good lavalier microphones, it comes with a durable mounting clip that you can easy mount on a t-shirt, lapel or other material for dependable and secure hands-free recording. Just clip it on, and you'll be ready to go.

Capturing great audio in the field requires more than just superior microphone technology. To get the best sound, you have to be able to monitor your source as its being recorded. Not all lavalier microphones come with on-board monitoring, but iRig Mic Lav does. In fact, among major brands, it's the first mobile lavalier microphone to offer this feature.

It comes with a combo 1/8" TRRS port that can be used to output audio to your favourite pair of headphones. Just set the toggle switch next to the port to "monitor" and plug in your headphones, and you'll be on your way to recording effortlessly amazing audio.

There's a saying that goes something like, "two heads are better than one."

The same can be said for microphones - when you're out in the field, sometimes you need to record more than one person.

iRig Mic Lav lets you chain and record with up to two iRig Mic Lav's on the same device thanks to the same dual-purpose 1/8" TRRS port used for headphone monitoring.

Simply set the toggle switch to "input," and then plug a second iRig Mic Lav in to record with two microphones.

To monitor a dual iRig Mic Lav setup, you just need to set the switch on the second iRig Mic Lav's jack to "monitor," and then you'll be able to plug in your headphones.

You never know what mobile device you'll have accessible while you're out conducting that next heated interview or spontaneous Youtube video. This can be a problem if a microphone is specifically made for one type of device. Fortunately, you'll never have that problem when iRig Mic Lav is in your pocket. It outputs its sound via an analog 1/8" TRRS output jack, and it captures the same high-quality audio no matter whether it's plugged into an iPhone or an Android device with a compatible TRRS input jack compliant with the CTIA/AHJ wiring standard.

In other words, with iRig Mic Lav you can make quality recordings anytime, anywhere and on any mobile device.

Pair iRig Mic Lav with VocaLive or EZ Voice and an iLoud portable speaker, and you'll have the perfect "hands-free" portable PA system that you can easily fit in a briefcase or backpack for trade shows, small group gatherings and other mobile presentations.

With iRig Mic Lav, you're ready to record right out of the box thanks to its powerful suite of included apps. You get iRig Recorder FREE for iPhone, iPad and iPod touch and Android, a straightforward audio capture app that is great for everything from recording journalistic interviews to making podcasts while on the go (and everything in between).

VocaLive is an expandable, powerful effects processor and multi-track recording app that's perfect for adding a creative touch to audio. EZ Voice for iPhone, iPad and Android is a streamlined and easy-to-use app loaded with vocal effects that make it easy to practice and record over any song stored in your device's music library.

Notes: Mantis have taken years of experience with Eurorack to create a low-cost case that makes the Eurorack modular synthesizer look, work, and feel like a professional instrument. Mantis is an instrument that is at home on stage, touring, or in the center of the studio.

Mantis has two rows of 104HP for you to rack your modules. It comes fully powered and assembled, just drop in your modules and play.

Using its sophisticated leg mechanism, you can set it to three different positions: 0, 45, and 90 degrees.

Power Power and more Power! With Mantis, say bye-bye to the tedious, never-ending calculation of current consumption for the i12V power. Mantis comes with a juicy Zeus power supply that delivers plenty of power both now and for the future.

Mantis deep black coloru gives you another option to customize your Eurorack look and matches perfectly with black Tiptop Audio modules.

Mantis comes with real Z-Rails made according to Eurorack enclosure standards. No sliding nuts or wrong spacing! It also has keyed power connectors to help protect your modules from damage from plugging the power in in reverse.

Weighing only 3kg/6.5lb, Mantis is so light, traveling has never been so relaxed.

Dual Mantis Studio Brackets

Using the optional bracket accessory Mantis can be doubled up to 416HP! Multiply your Mantis and watch your studio setup grow.

Notes: VU meter for eurorack.

BLINKS is a VU meter for eurorack with 24 RGB leds per channel, function is pretty easy, it has 2 inputs, one for each led column (no output).

PATT button changes the led pattern ( 6 patterns to choose ).

SENS button changes the input sensitivity, cycling in 7 steps.

Long pressing the PATT button enters the color scheme selection.

Long pressing SENS button enters the brightness adjustment. Most probably you'll prefer the lowest setting.

The module has a 5v regulator in case you don't have 5v in you eurorack PSU. A jumper in the back select if the led board would be powered by the 5v rail or the internal regulator (which works with the +12v rail)

Up to 3 stereo signals can be connected to a buffered input using the rear headers.

Easy DIY with only a few components, the led board is already assembled.

5v not indispensable
+5v: 30 mA (on lowest brightness)
+12v: 4mA (or ~40mA if 5v rail is not used)

Notes: This module is a 8 ins and 8 outs precision buffered matrix.

Every output has a rotary switch to select an input. You can make the same input go through several outputs but not several inputs go to the same output.

There's also a bicolor led next to every switch for visual info of the signal that is going thru it.

Allows fast patch changes and easy rerouting signals, both audio and cv.

Can be used as a traditional buffered multiple, pretty flexible one: 1 x 8 outs, 2 x 4 outs, 4 x 2 outs or any other combination.

62 mA +12V
65 mA -12V

Notes: The only module named after a Swedish botanist? Possibly. Relentless synth innovator Dave Rossum pushes the boundaries again with a state-variable stereo filter offering through-zero frequency modulation. Sounds complicated. Sounds good.

Supplier notes:
Following in the tradition of Evolution and Morpheus, LINNAEUS represents yet another Dave Rossum innovation in filter technology.

LINNAEUS is a stereo state-variable filter that provides the unique ability to linearly modulate its resonant frequency through zero into negative frequency, while maintaining stability. With extensive voltage control of nearly every parameter, Linnaeus lets you manipulate the filter's natural response curve in new ways, to create both subtle and dramatic timbral effects. And with a "one-knob-per-parameter" interface, LINNAEUS inspires sonic creativity that invites (and rewards) real-time interaction.

LINNAEUS's cutoff/resonant frequency is exponentially voltage controllable from sub-audio to ultrasonic frequencies, while its resonant gain (Q) is exponentially voltage controllable from 0dB to greater than 60dB.

LINNAEUS's channel output response characteristics are independently and continuously variable from Lowpass, through Bandpass, Highpass and Notch, to Low and High Shelving characteristics. Voltage control of the response characteristics are independently selectable for each of the two channels.

The linear thru-zero modulation is provided by an integrated modulation oscillator and/or an External Linear FM modulation input.

The voltage-controllable modulation oscillator can track the filter's exponential frequency or operate independently. The modulation oscillator's output waveform is continuously variable from Off through Sine, Triangle, and Sawtooth, to Square. The modulation oscillator output is summed with the external linear FM input and applied to the modulation index VCA, which controls the linear thru-zero modulation index from zero to 8X. The modulation index is, of course, also voltage controllable.

Notes: Buzz. Beep and bloop. Get high on the lo-fi sounds of "old-school" games, toys and terminals!

The Mainframe provides sample rate reduction ranging from 48kHz to 110Hz. A little background... the sample rate is the number of times per second that a sample or snapshot of an analogue signal is taken. For example, CDs (remember them?) had a sample rate of 44.1kHz which means that the original analogue signal is sampled 44,100 times per second.

The sample rate defines the frequency range that can be reproduced while maintaining good fidelity. When the sample rate is reduced the quality of the audio is degraded and aliasing occurs. Aliasing means audible artifacts created when higher frequencies are sampled at an inadequate rate and the result is distortion. The Mainframe's sample rate range is wide enough to take you from sounds that are quite pristine to sounds that are unrecognizable when compared to the input signal.

It also provides bit crushing ranging from 24-bit to 1-bit. What does that mean? Bit crushing is bit depth reduction. Back to the CD example... CDs used a 16-bit bit depth meaning that each of its samples was represented by 16-bits of information. Higher bit depths can accurately represent a greater dynamic range while bit crushing increases the number of sampling errors and creatively degrades the sound to bring us back to those nasty "old school" sounds we love.

The Mainframe's selectable High/Low/Band-Pass filter lets the user shape the artifacts of the bit crushing and sample rate. Another very cool feature is its Sample Rate Tuning Mode where the pedal analyses your input signal in real-time and sets the sample rate to match the pitch of your signal, or a set interval above your signal. This allows you to set the sample rate to match the key of a song, or it will continually adjust the sample rate based on what you play!"

Specifications

Circuit: Digital
Bypass: Buffered Bypass
Audio: Mono
Power Supply: 9.6VDC-200mA power adapter included
Dimensions (in): 4.5 x 2.75 x 2.1
Current Draw: 90mA
Year Released: 2020

Notes: Mighty oscillations, mini size.

An analog oscillator and LFO with pure waveforms and precise tracking in a compact package. Perfect as a utility modulation source but equally capable to be used as a primary sound source. Patch it up and let it rip!

Features
Four simultaneous pure waveforms: Sine, Triangle, Square and Sawtooth
Pitch input for 1V/Oct tracking and FM
SYNC input for Hard Sync. This input has a comparator so that you can use a variety of waveforms as triggers.
Switch to select VCO (audio) or LFO range of operation
Three position Octave switch to jump pitch up or down by two octaves
PITCH knob has three octave range in VCO mode (extended to seven with the octave switch) and seven octave range in LFO mode (extended to 11 with the octave switch).
Bicolor led indicates the state of the triangle core rate

Specs
Width 14HP
Depth 37.5mm
Power 19mA @ +12V
16mA @ -12V

Notes: The Vermona MEX3 is a midi extension for the meloDICER sequencer and allows the sequencing of synthesizers outside the modular system.

Features:

MIDI output of sequences
Sequences can now be polyphonic with up to three voices
meloDICER can receive MIDI Control Change messages to remotely control all parameters.
All meloDICER controls can send MIDI Control Change messages
Direct synchronisation to a MIDI clock including shuffle conversion (e.g. from a Multiclock)
MeloDICER converts the MIDI real-time messages START, STOP and CONTINUE.
Module width: 4 TE
Power supply via meloDICER

Included in delivery:

MEX3
Connection cable to meloDICER
2 x MIDI cable DIN-3.5mm; 150 cm (Type A)
To use the meloDICER with the MEX3, the latest firmware must be installed. This can be downloaded from the manufacturer's website.

Notes: The ultimate real analog synth for everyone.

UNO Synth is the ultimate portable, monophonic, true analog synthesizer and IK Multimedia's entry in the hardware synthesiser world.

IK Multimedia combined two decades of experience in software and hardware development with the expertise of Italian boutique synth-maker Soundmachines and IK's synth guru, Erik Norlander (one of the brains behind acclaimed synths like the Alesis Andromeda). The result is a no-compromise instrument with massive analog sound that's also easy to use with hands-on programmability and advanced features at an unbeatable price.

The days of compromise are over. Now everyone can own a real analog synth with professional sound.

And UNO Synth is proudly made in IK's own Italian manufacturing facility to ensure the highest quality standards. Like the majority of IK hardware products, UNO Synth is built using a combination of IK's state-of-the-art, automated mounting machines and test systems and fine, renowned Italian craftsmanship.

Seasoned synth professionals and beginners alike will love UNO Synth's high-quality, pure analog audio path and its ultra-compact form factor. With both classic and modern synth sounds instantly at hand, UNO will put a smile on the face of synth fans of every musical genre. All this in a synth module that can be easily carried anywhere.

Electronic music lovers or first-time synth users will get instant satisfaction from this affordable, easy-to-use instrument even if they are new to analog synths or synth programming. Thanks to its onboard presets and easy-to-play keyboard with selectable scales and arpeggiator, UNO Synth is the perfect gateway into the synthesizer world.

The highly flexible synthesis engine not only excels in producing the rich, warm, punchy, deep bass sounds that are the core of a high-quality monophonic synth, it's also perfectly designed to bring a wide sonic palette of leads, drones, arps, sequences, sweeps and effects.

While UNO Synth is monophonic nature, its two independent oscillators can be tuned differently to also generate interesting pad-like interval sounds as well as octaves. Pulse width modulation of each oscillator provides the ability for a single oscillator to sound like two while the second oscillator can be tuned to an octave or interval for advanced modular-style timbres from the greatest classic synths.

Ease-of-use with powerful programming:

UNO Synth comes with 100 grab-and-go presets (80 fully rewritable), making it ready to play right out of the box. Each preset not only includes the sound programming, it also includes an associated arpeggio and sequence for even greater musical expression and portable sonic power.

This makes it easy for everyone to find the perfect sound, and beginners and professional producers alike will have great inspirational starting points to make working with the UNO Synth faster, more productive and more enjoyable.

Ultra-portable, battery-powered, to make music everywhere:

UNO Synth's ultra-compact dimensions make it among the smallest monophonic synth available. With its light weight (only 400g) and its battery-power supply (4xAA included) or USB power-supply (for battery power banks), UNO Synth gives musicians of all kinds the freedom to make music everywhere without being tied to a location! Fully untethered, it's the ideal analog synth to carry around all the time.

Use it standalone, live with your keyboard or with your DAW:

Electronic music lovers or DJs can make music with UNO Synth whenever and wherever the inspiration strikes. The built-in audio input also allows for daisy chaining other external audio device (like drum machines) so they can be used together with UNO Synth without the need for an additional mixer, keeping the set up at minimum for the greatest portability.

Notes: Erica Synths Black Spring Reverb is a different take on spring reverberation units. Firstly, it has built in vactrol based audio compressor, secondly, it can operate an external tank and combination of both internal and external ones for effects unheard before, thirdly, in order to animate reverb effect, the module has built-in feedback effects - pitch shifters, delay, ring-modulator, etc; feedback amount and effect parameters can be controlled manually and via CV, making the module an experimental instrument on its own. Module comes with compact spring reverberation tank which can be easily installed in most eurorack cases.

Features
Compact spring reverberation tank to install in a skiff case
Manually and CV controlled feedback amount
Vactrol-based compressor
7 distinct feedback effects
Selection between internal, external reverberation tanks or combination of both
Feedback Send and Return jack sockets
The module is designed to be used with wide variety of spring tanks, but the best results will be using tanks with low input impendance - 8-200ohm

Technical specifications:
Audio input level -5V - +5V
CV level (full span) -5V - +5V
Power consumption 43mA, -71mA
Module width 12HP
Module depth 30mm
Internal reverb tank dimensions 190mmx67mmx24mm (30mm with spacers)