安全购物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全购物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Synth modules

首页  Equipment  

Synth modules

Options
Items 51 to 100 of 1,010 on page 2 of 21
«  1  2  3  ...  21  »
Subscribe to our weekly Studio Equipment emails
2hp
Cat: 680018 Rel: 12 Mar 18
 
Analog voltage controlled oscillator with CEM3340 based architecture
Notes: VCO is an analog voltage controlled oscillator based on the reissue of the legendary Curtis CEM3340 IC.

Many believe this chip to be the greatest sounding analog oscillator of all time. VCO features simultaneous triangle, sawtooth, and square wave outputs with linear FM, hard sync, and PWM capabilities. Accurate 1V/Oct tracking across 10+ octaves provides a huge frequency range for melodies or dramatic sweeps.

Add some analog warmth to your patches with VCO.
Read more
MRP:$150.21 SAVE 17%
 2 in stock $124.12
Click for better price!
or call +44 20 7424 1960
quote 680018
2hp
Cat: 686047 Rel: 04 May 18
 
Lush sounding, voltage controllable stereo reverb
Notes: Verb is a lush stereo reverb with a full feature set and superior audio quality. A wide range of reverb times take your sound from small room to never-ending concert hall.

CV over mix allows dynamic movement between the dry and reverberated sound, and the dampening control lets you dial in the perfect timbre for the wet signal. Whether you need a traditional reverb for an FX send or an esoteric sound design tool, Verb can take you there. Get lost in space with Verb.
Read more
MRP:$127.49 SAVE 19%
 3 in stock $103.08
Click for better price!
or call +44 20 7424 1960
quote 686047
2hp
Cat: 649102 Rel: 11 May 17
 
Stereo reverb Eurorack module
Notes: Verb is a lush stereo reverb with a full feature set and superior audio quality. A wide range of reverb times take your sound from small room to never-ending concert hall.

CV over mix allows dynamic movement between the dry and reverberated sound, and the dampening control lets you dial in the perfect timbre for the wet signal. Whether you need a traditional reverb for an FX send or an esoteric sound design tool, Verb can take you there. Get lost in space with Verb.
Read more
MRP:$127.49 SAVE 19%
 1 in stock $103.08
Click for better price!
or call +44 20 7424 1960
quote 649102
2hp
Cat: 714255 Rel: 17 Dec 18
 
Speech synthesiser/formant oscillator with speech & FOF synthesis algorithms - 2HP
Notes: Vowel is a speech synthesis and formant oscillator. It synthesizes and approximates the human voice by generating vowel sounds. These can be manipulated to provide deep low baritones, or high pitched squeaks. Two unique algorithms provide separate takes on this exciting synthesis method and allow for a multitude of talking synth sounds.
Read more
MRP:$172.94
 1 in stock $157.79
Click for better price!
or call +44 20 7424 1960
quote 714255
2hp
Cat: 704937 Rel: 01 Oct 18
 
Powerful, easy-to-use speech synthesiser & oscillator
Notes: Vowel is a speech synthesis and formant oscillator. It synthesises and approximates the human voice by generating vowel sounds. These can be manipulated to provide deep low baritones, or high-pitched squeaks. Two unique algorithms provide separate takes on this exciting synthesis method and allow for a multitude of talking synth sounds.
Read more
MRP:$172.94 SAVE 19%
 1 in stock $139.90
Click for better price!
or call +44 20 7424 1960
quote 704937
Cat: 589492 Rel: 09 Dec 15
 
Buffered multiple synthesiser module with LED indicators - 3HP wide
Notes: The Buff Mult is a buffered multiple with LED indicators to show positive and negative voltages. Using wide bandwidth opamps, it functions as a dual 1-to-3 or a single 1-to-6 mult for audio, video, or CV signals.
Read more
MRP:$90.89 SAVE 21%
 2 in stock $71.53
Cat: 762166 Rel: 18 May 20
 
polyphonic oscillator module
Notes: Seriously potent polyphonic voice built around 16 sine-based oscillators. Capable of a huge range of tones thanks to FM, phase distortion and wavefolding. Another cracker from a consistently reliable brand.

Supplier's notes:
The Ensemble Oscillator is a unified polyphonic voice of sixteen complex oscillators combining additive, FM, phase-distortion and wavefolding synthesis techniques in new unorthodox ways. By quantizing the oscillators to scales or series of harmonics, the Ensemble Oscillator allows you to explore the sonic boundary between musical chords and rich evolving textures. Easily create a wide variety of sounds ranging from aggregates of pure sine waves to pulsar synthesis or pristine harmonic tones and lush wide chords to rich dirty drones and rumbling glitches. Custom scales can quickly be "learned" and saved using a CV keyboard or by manually entering notes with the controls.

The Ensemble Oscillator is designed by Matthias Puech and 4ms Company.

30 factory-programmed, user-writeable scales organized in three groups:
12TET: all notes quantized to equal temperament, repeating over octaves
Octave: unquantized notes, repeating over octaves
Free: unquantized notes, repeating over the interval between the lowest and highest note

16HP Eurorack format module
0.98" (25mm) maximum depth (including power cable)
10-pin to 16-pin Eurorack power header
Power consumption
+12V: 114mA maximum
-12V: 45mA maximum
+5V: 0mA (not used)
Audio outputs
Frequency range: 0Hz (DC) - 20kHz
Typical amplitude: 10Vpp
Maximum amplitude: 18.5Vpp
1V/oct inputs (Root and Pitch)
Voltage range: -2V to +6V (8 octave range)
Factory calibrated to 1.00V/oct
Per-jack user-calibration allows from 0.7V/oct to 1.3V/oct
CV inputs (other than 1V/oct)
Voltage range: -5V to +5V
Gate inputs
Trigger threshold: 2.5V
User memory (non-volatile)
Scale slots: 30
Shift feature settings
1V/oct calibration settings
Read more
MRP:$390.05 SAVE 22%
 More than 10 in stock $302.94
Click for better price!
or call +44 20 7424 1960
quote 762166
Cat: 717580 Rel: 06 Feb 19
 
Four channel stereo mixer with line-level, modular-level & headphone outs
Notes: The Listen Four is a four channel stereo mixer with line, modular, and headphone outputs. Two mono channels with Pan knobs and two stereo channels with dual inputs provide optimal compatibility with both stereo and mono signals. The Listen Four can be daisy-chained to other Listen modules to create a larger mixer with sub-mix outputs.
Read more
MRP:$218.38 SAVE 19%
 1 in stock $176.72
Click for better price!
or call +44 20 7424 1960
quote 717580
Cat: 717581 Rel: 06 Feb 19
 
Four channel stereo mixer with balanced 1/4-inch & headphone out - 12HP
Notes: The Listen Four Quarters is a four channel stereo mixer with 1/4" (6.35mm) TRS balanced outputs and 1/8" (3.5mm) headphones output. Two mono channels with Pan knobs and two stereo channels with dual inputs provide optimal compatibility with both stereo and mono signals. The Listen Four Quarters can be daisy-chained to other Listen modules to create a larger mixer with sub-mix outputs.
Read more
MRP:$241.10 SAVE 26%
 1 in stock $177.77
Cat: 752435 Rel: 25 Oct 19
 
Small passive expander for the Listen Four & Listen IO modules - 4HP
Notes: The Listen Up is a small passive expander for the Listen modules that provides stereo 1/4" (6.35mm) jack inputs and outputs. It connects to one or two Listen modules and/or WAV Recorder module with the included 3-pin cables. There are four 1/4" jacks arranged in left/right pairs. The left jack of each pair can be used as a TRS stereo jack if the right jack is unpatched.
Read more
MRP:$74.48
 1 in stock $71.53
Click for better price!
or call +44 20 7424 1960
quote 752435
Cat: 752443 Rel: 25 Oct 19
 
32HP metal enclosure for Eurorack modules - Beta version
Notes: Limited Beta version of the popular Pod32. These are new, fully tested and functional units. The only difference between the Pod32 Beta and the regular Pod32 is that the Beta version has fewer holes to screw in modules. Most common Eurorack sizes will fit from 4HP to 32HP, but some odd sizes and combinations won't fit. Please refer to the product image, or visit the 4ms website for possible module combinations.

Pods are a perfect way to get started in Eurorack module, or add a couple more modules to your monster system!

Made from 100% anodized aluminium, Pods are light, tough and perfect for on-the-go set ups. Mix and match your Pods with desktop synths, effect pedals, drum machines or any musical gear for a flexible modular system. Need to add another module? Just add a Pod! Need to pack light for a live set? Just grab the Pods you need and go!
Read more
MRP:$29.03 SAVE 17%
 4 in stock $24.20
Cat: 589491 Rel: 10 Dec 15
 
Expansion module for the Quad Clock Distributor (QCD) synth module - 12HP wide
Notes: The QCD Expander is an expansion module for the Quad Clock Distributor (QCD). The QCD Expander adds a host of features, turning the QCD into a programmatic non-linear sequencer. Each channel gets a CV Trigger Delay (Pulse Width) jack and knob, an additional output jack with three selectable modes, and attenuverters for all CV input jacks. Self-patched evolving rhythms and swing/shuffle patterns are easily obtained, as well as complete control over standard rhythmic patterns.
Read more
MRP:$229.74 SAVE 30%
 2 in stock $160.94
Cat: 589490 Rel: 10 Dec 15
 
4 channel voltage controlled clock divider/multiplier synthesiser module with master tap tempo - 10HP wide
Notes: Four channel voltage controlled Clock Divider/Multiplier with master Tap Tempo. Each channel can be synced to the tap tempo, to the channel above, or to an external clock. Each channel also has a reset jack.

With a Tap Tempo button and five sync'ed clock outputs, the QCD is a versatile head-of-the-chain "Master" clock module, and/or a complex rhythmic pattern generator.
Read more
MRP:$276.44 SAVE 23%
 2 in stock $213.54
Cat: 589499 Rel: 09 Dec 15
 
Breakout synthesiser module for Rotating Clock Divider module - 4HP wide
Notes: The RCD Breakout adds features to the Rotating Clock Divider module. Six switches allow you to set the maximum Divide-by amount, Gate or Trigger mode, Counting mode, Spread mode, and Auto-Reset. The RCD Breakout requires the RCD to function, and does not use any extra power.
Read more
MRP:$109.82 SAVE 20%
 2 in stock $88.36
Click for better price!
or call +44 20 7424 1960
quote 589499
Cat: 589497 Rel: 09 Dec 15
 
Rotating Clock Divider (RCD) synthesiser module - 4HP wide
Notes: The Rotating Clock Divider (RCD) produces eight divided clock tempos from a single input clock. The divisions range from /1 to /64, including all odd and non-standard divisions such as /3 and /17 and /62. A Rotate CV input re-assigns the division number of each jack, allowing for creative mix-ups and experimentation. A Reset input jack helps to sync/start with an external clock.

Jacks:
- Clock Input (5V to 15V clock, rising edge triggered), max 3kHz
- CV Rotate (0V to +5V input)
- CV Reset (5V to 15V trigger)
- Divided Clock Outputs (8 jacks):
Divide-by-(1+R)
Divide-by-(2+R)
Divide-by-(3+R)
Divide-by-(4+R)
Divide-by-(5+R)
Divide-by-(6+R)
Divide-by-(7+R)
Divide-by-(8+R)
...where R is the CV Rotation.
- Selectable Gate/Trigger mode:
- Selectable Divide range up to Divide-by-64:
Two jumper pins on the back can be pre-set with jumpers plugs, or used with (forthcoming) breakout panel.
- Selectable Auto-reset:
Auto-reset will reset the divide counter every 16/24/32 clocks, which keeps the beats more "dance-able" even when using the "weird" clock divisions (3/5/6/7/9/10/11/etc..) Two jumper pins on the back can be pre-set with jumpers plugs, or used with (forthcoming) breakout panel.
Read more
MRP:$207.02 SAVE 17%
 1 in stock $171.46
Click for better price!
or call +44 20 7424 1960
quote 589497
Cat: 752437 Rel: 25 Oct 19
 
25W Eurorack power supply
Notes: The Row Power 25 is a clean, regulated, and protected power supply module for Eurorack systems. It requires a barrel-style power brick (15V - 20V DC) and supplies power to modules via flying bus cables, direct connection, and/or bus boards.

The Row Power 25 provides 25W of power for any Eurorack modules (typically 4-10 modules*):

+12V @ 1.4A maximum, 1.0A recommended
-12V @ 0.8A maximum, 0.5A recommended
+5V @ 1.0A maximum, 0.8A recommended

*number of modules can vary depending on each module's power consumption.

Simply plug a universal power supply (laptop style) into either of the barrel plugs on the 4HP panel. Connect your modules via flying-bus cables or the Bus Stick.

Multiple Row Power modules can be powered from a single power brick by daisy-chaining with an inexpensive barrel cable. The Row Power 25 can also be daisy-chained to Pods. Each Row Power and Pod will be independently regulated and protected for ultra-low cross-talk between rows.
Read more
MRP:$114.87 SAVE 17%
 4 in stock $95.72
Click for better price!
or call +44 20 7424 1960
quote 752437
Cat: 739048 Rel: 29 Jul 19
 
Eurorack power supply module - 4HP
Notes: Row Power is a clean, regulated, and protected power solution for eurorack systems. Row Power 35 provides 35W of power, suited for any typical eurorack row (84HP to 168HP):

+12V @ 1.4A
-12V @ 1.25A
+5V @ 1.0A

Simply plug a universal power supply (laptop style) into either of the barrel plugs on the 4HP panel. Connect your modules via flying-bus cables or the Bus Stick.

Daisy-chain multiple Row Powers to use a single power brick for multiple rows (typically 3-5 rows per power brick). Each row will be independently regulated and protected for ultra-low cross-talk between rows. Rows can also be hot-swapped (plugged/unplugged without powering the whole system down).
Read more
MRP:$167.89 SAVE 24%
 1 in stock $128.34
Cat: 589505 Rel: 10 Dec 15
 
Innovative resonant filter synthesiser module - 26HP
Notes: The Spectral Multiband Resonator from 4ms Company is an innovative resonant filter which can process audio like a classic filter bank, ring like a marimba when plucked/struck, vocode, re-mix tracks, harmonize, output spectral data, quantize audio to scales, and much more...
A gorgeous ring of colored lights displays the frequency of each filter, as well as the levels and current scale selection(s).

At a glance, the SMR works like a normal six-band graphic EQ: six frequency band-pass filters are mixed together using sliders. Resonance/Q is variable, which changes the "ringy-ness" or width of the bands.

But here's where comparison stops. The frequency of each channel is treated like a note in a scale, and the six bands form a chord. Spin the Rotate knob and the "notes" circle around the scale, rotating back to the bottom once they've reached the top. Adjust Spread and the distance (interval) between each note changes. Triggers for up/down motion, CV inputs for sequencing and scale selection allow for flexible control with external modules. Morph, which automatically cross-fades between frequencies, together with variable Slew allows rhythmic clocks drive the SMR as a variable-speed evolving resonant filter.

At maximum Resonance/Q, the SMR can be struck like a gong or marimba by inputting clocks or triggers. The frequency of each channel is quantized to a scale: beautiful chords, ethereal tones and eerie ambiance flows easily. With lower resonance, the SMR can pull out particular frequency bands, and sweep these across the spectrum.

Two 1V/octave Frequency jacks allow for tracking even and/or odd bands and creating floating melodies over evolving chord bases, or complex percussive membrane sounds.

Save your settings into one of six storage banks, and recall on the fly. On startup, the SMR instantly jumps to the last saved settings. The color scheme of the lights can be adjusted, so if you prefer all white lights on your modular, you can have that (or all red, or rainbows, pastels, etc..)!

Advanced features:
- Program your own scale. The frequency of each of the 20 notes can be assigned by setting the octave, the semi-tone, and coarse and fine micro-tone. Up to 11 scales can be saved permanently in the user bank
- Adjust color scheme of the LEDs. Pick a pre-programmed color scheme or create your own using the sliders to set Red/Green/Blue values. Custom color schemes can be saved permanently
- Save your settings in one of six parameter banks. Note position, scale and bank selection, Q value, Lock settings and color scheme can be saved and recalled on the fly. On startup, the SMR loads settings from the last saved bank.
- Optional alternative filter type for a more exponential decay when plucked and different timbral qualities. Freq jacks no longer track 1V/oct in this mode.
- Slider LEDs can be assigned to display level for each channel (combination of slider position and CV on the jack), or clipping for each channel.
Read more
MRP:$549.10 SAVE 22%
 1 in stock $427.07
Cat: 655465 Rel: 29 Aug 17
 
High fidelity, two-channel stereo sample recorder & playback module
Notes: The Stereo Triggered Sampler can record high quality stereo files, while simultaneously playing two different stereo files. A maximum of 600 samples can be loaded from the removable/swappable microSD card, in a variety of formats up to 96kHz/32-bit/stereo WAV. All sample parameters (1V/oct pitch, sample file selection, length, and start position) are CV controllable.

600 Samples:
A maximum of 600 samples can be loaded at once, arranged into banks of 10 samples each. Samples and banks can be re-arranged on the fly using the simple on-board Edit features. Newly recorded samples can be instantly played back and re-pitched, reversed, chopped up, etc... the result of which can even be bounced down and re-recorded to as a new sample! Sample files are limited to 4GB each, which is over 6 hours at 44k/16b/stereo.

Two Stereo Playback Channels:
Each playback channel has a knob and CV jack for Sample File selection, as well as a Start Position knob and CV jack for controlling where in the sample playback will begin. The Length knob and CV jack determine how much of the sample is played back: from tiny grains, to percussive hits, to longer loops... or just the entire file. These are powerful tools for re-arranging a sample, joining multiple samples, and creating dynamically re-sized loops within a larger sample. Combined with the Play Trigger jack and the 1V/oct jack, the STS can be two complete multi-timbral pitch-tracked stereo voices!
There's also a Reverse button and jack for backwards playback, and an End Out jack for synchronizing loops, or cascading sample playback with other events.

Looping and Sync:
Looping is easy: just hold the PLAY button down for two seconds to toggle loop or one-shot. The loop timing clock will output from the End Out jack. Or, send a clock into the Play Trig jack to sync the loop to external timing.

Stereo Recording:
Whether you patched 47 modules to create the ultimate percussive blast, or you want to capture your four hour ambient performance, recording high-quality .wav files on the STS is simple. Just hit the REC button or fire a trigger and a new stereo .wav file will be created on the SD card. Do as many takes as you need: the STS never deletes your files. Re-ordering or re-arranging samples into banks is easy, even without a computer.
You can even fill a bank with 10 different variations and immediately use them for playback.
By default the STS records at 44.1kHz/16-bit, with an option for 24-bit (a future update may increase the sample rate to 96kHz)

Easy sample loading:
Using a computer is completely optional with the STS, since samples can be recorded directly to the module and placed into the bank of your choosing. But for users with large existing sample banks, the intuitive automatic bank loading features make dragging and dropping your entire sample library a snap. You never have to rename your files again!
Read more
MRP:$520.07 SAVE 18%
 2 in stock $423.92
Click for better price!
or call +44 20 7424 1960
quote 655465
4ms Wav Recorder Module (synth module)
Cat: 648950 Rel: 29 Jun 18
 
6HP Eurorack module for recording high-fidelity, low-noise stereo WAV files
Notes: The WAV Recorder from 4ms Company is a high fidelity, two-channel stereo audio recorder with basic playback features. Accepting a wide range of input signals, from line-level to modular-level, the WAV Recorder stores audio onto a microSD card in lossless .wav format up to 96kHz/24-bit. The trigger jack can be used for capturing rhythmic loops or synchronizing multiple WAV Recorder modules for multi-track recording. In Playback mode, the trigger jack or button plays the most recent recording. A simple file/folder navigation system can be used to browse the folders on the card for playing back .wav files. A Gain knob allows for up to +20dB of boost, and an LED Signal Meter indicates clipping and the signal level.
Read more
MRP:$309.26 SAVE 24%
 2 in stock $235.63
Cat: 601493 Rel: 22 Apr 16
 
Eight output, modular control panel - 14HP wide
Notes: Highly configurable Control, Modulation, Triggering and Pattern module. 8 simultaneous Outputs and 12, individually assignable, Output types.

Output and Modulation types include Pulses, Gates, LFOs, Digital Noise, Loopable S&H modes and a collection of Arpeggios and Rhythmic Loops.

Tempo-sync for all Outputs is provided by the on-board Clock or
an External Clock Input with Tempo ranges from 20 to 270 BPM.

Outputs can be set to any Clock Division or Multiple from 1/16th
of a Beat to 16 Bars and can be Offset up to 360 Degrees.

Intuitive interface allows user-definable control over knob and parameter behavior to match the preferences of individual users.

For audio, please visit: http://www.abstractdata.biz/products/eurorack/3x/ade32/?tab=audio
Read more
 2 in stock $313.47
Cat: 601494 Rel: 28 Mar 18
 
Sophisticated rhythm creation & manipulation module - 14HP
Notes: Pattern and rhythm creation and manipulation module for creating musically useful rhythms and patterns from a variety of inputs - it's a module that will jam along with you.

36 algorithms in 6 sets covering Variables, Multiples, Probability, Logic, Phase and Gates with configurable CV control over all parameters.

Takes regular clocks and generates rhythmic patterns, takes rhythmic patterns and generates new patterns, takes irregular and random patterns and generates new, irregular and probability-based patterns.

The patterns can be rhythmic, continually evolving or entirely random and can be controlled and manipulated via multiple CV options.

Can also be used as a utility module to perform Clock Division/Multiplication, Phase-Shifting and Logic-related tasks.
Read more
$197.76 SAVE 10%
 5 in stock $177.98
Cat: 665165 Rel: 18 Oct 17
 
Transistor ladder VCF with advanced low-pass design - 18HP
Notes: The Discrete Core Ladder VCF shines with crisp sound, a very low noise-floor and a multitude of technical gimmicks. The module features a three-channel input mixer with saturation capabilities. Four outputs provide audio material filtered with -6 dB, -12 dB, -18 dB and -24 dB edge steepness. Each connector is phase-shifted by 90 degrees compared to the prior socket. Cutoff and resonance are voltage controllable. While self-oscillating, the filter can be played chromatically. This means, that the Discrete Core Ladder VCF is usable as a quadrature VCO as well. Thanks to a boost knob, the bass fundament can be kept intact at high resonance settings. A high-pass filter in the feedback path allows users to alter the resonance behaviour. Compared to Moog's classic Ladder design, the sound of the ACL circuit is considerably rougher. Saturation effects lead to roaring results. Tip: Be sure to try out filter FM patches!
Read more
 2 in stock $413.40
Cat: 665158 Rel: 18 Oct 17
 
State variable filter with 12dB slope, individual outputs & variable filter routing - 26HP
Notes: The Dual State Variable VCF consists of two multimode filters with high-pass, band-pass, notch and low-pass outputs. The circuits feature an edge steepness of -12 dB per octave. Routing options allow serial or parallel connection. Thanks to normalizations and a total of three cutoff potentiometers, stereo material can be processed as comfortably as mono signals.

Furthermore, a well-known feature from the Oberheim SEM synthesizer was implemented in the Dual State Variable VCF: The notch characteristic can be weighted more to the high-pass or low-pass side.

The resonance sounds extraordinarily rich and wet, even high values never sound all too harsh. While self-oscillating, the filters can be played like sine oscillators. By modulating both circuits in opposite direction, users are able to achieve interesting stereo effects.
Read more
 2 in stock $544.90
Cat: 655470 Rel: 03 Jul 17
 
Envelope generator module - 21 HP
Notes: The ADSR envelope from the Japanese 100m system is well-known for its percussivity and the enormous punch. ACL gives us three of them in one single Eurorack module, the Envelope X3.

Sometimes an envelope generator doesn't have to be function-ladden, but just reliable, solid and good. This is what ACL achieves with the Envelope X3 module. The technical quality originates in precision components, as used in measuring instruments for instance, in order to keep the parameters exact, always the same and to keep you happy.

Three identical, classic Attack-Decay-Sustain-Release envelopes are integrated; function-wise rather simple with a gate input and one positive and one inverted envelope output each. The gate inputs are normalized (1 -> 2 -and 1 -> 3; with input 1 as master) which minimizes the amount of patch cords. Normalizations can be disrupted by patching a cable.

Each envelope generator has a time range switch with two positions to select between short and long envelope times.

The LEDs for visualisation were omitted to keep the power consumption low.
Read more
 1 in stock $358.70
FORTHCOMING
ACL Mini MIDI USB MIDI To CV Converter Module
Cat: 776679 Rel: 31 Jul 20
 
MIDI to CV converter module
Notes: The ACL MINI MIDI is a USB MIDI to CV convertor module in a small module.

It uses MIDI CLOCK, START/STOP, one selectable MIDI Controller and a monophonic MIDI Note to be converted to Eurorack compatible CV, GATE and clock signals.

It can be used as USB MIDI to CV interface by connecting to your computer via the USB B port. A Class Compliant USB MIDI device can be connected to the USB A port.
Read more
MRP:$339.56 SAVE 17%
coming soon $282.96
Cat: 690905 Rel: 17 Dec 18
 
Flagship oscillator featuring ten individual waveform outputs - 26HP
Notes: We are proud to present our newest workpiece: The ACL Multifunction Discrete VCO combines a massive single saw tooth core with a strong sub oscillator - each of them with its individual wave shaper. As usual, we didn't spare any effort to bring you the best quality - from the inside right to the outside.

The module comes with saw, inverted saw, PW rectangle, triangle and sine - all important waveforms of a proper modular unit are featured. We constructed all signal paths in fully discrete design up to the outputs - but it is much more to it than just a clone of a classical VCO:

If you play with the linear detune, it is possible to create awesome "beating effects" between two or more VCOs. The direct relation between the linear detune and VCO response makes it possible to use the same frequency at every pitch - for an atmospheric, rich and alive sound.

If you play the VCO in LFO mode, the module enables to control the speed in the same way as in VCO mode. If you leave V/Oct CV, you can generate very long lasting sweeps.

Another strong feature are the big syncing capabilities: Adjust the sync amount manually or via CV between the range of sync and no sync - and surf through variable degrees from soft to hard sync.

The core should sync to all repeatable waveforms - approximately exceeding 1 V pp - but in case sync wave is important for some applications, it is possible to choose between falling and rising edge sync in order to hold the proper phase relation between the syncing and the synced wave.

The Gate Input gives you the option to reset the VCO core at the beginning of every note. This feature is highly recommended for the creation of bass and percussion patches if every attack should sound equal and systematic at each time the notes are played. The Gate Input can be used as hard-sync input as well, even in the same time with the Sync input.

You are free to modulate both the oscillator and sub oscillator rectangle wave pulse widths through their separate PWM Ins and PW pots.

On top of this, you also have the possibility to choose between different PWM "carrier" waves to change the PWM-behaviour: Rising and Falling Sawtooth will create an unsymmetrical PWM, while Triangle will create a very musical sounding symmetrical PWM.
Read more
 1 in stock $800.50
ACL Pan Mix Mixer Module (synth module)
Cat: 776671 Rel: 30 Jun 20
 
mixer module
Notes: The ACL Pan Mix module mixes up to four different mono sources into a stereo output with panorama and gain control. It also includes an stereo aux input, which will be added unity gain to the sum for cascading purposes.
Read more
MRP:$254.98 SAVE 17%
 2 in stock $212.48
ACL Sum Sum Mixer Module (synth module)
Cat: 776668 Rel: 30 Jun 20
 
mixer module
Notes: The ACL SUM SUM consists of two rows of six inputs that are summed into one output each.

It can be used as a stereo signal summer or two mono signal summers, either audio or CV.

The internal gain of each row can be switched between Unity gain, a gain of 0.5 (-6dB) or 0.33 (-9.5dB) using convenient dip switches on the back of the module.
Read more
MRP:$170.41 SAVE 17%
 2 in stock $142.00
FORTHCOMING
ADDAC System ADDAC102 VC FM Radio Module (red faceplate)
Cat: 773955
 
FM radio module
Notes: This is Version 2 of this module, updated in order to be skiff friendly.

With the ADDAC102 FM Radio you'll be able to tune-in FM radio. Besides the ability of station broadcasts as sound generators for your synthesis, you can also have a lot of fun with the fact that its a great noise generator- the static picks up all kinds of great electromagnetic interference.

It provides controls like tune, volume and seek (all of them controllable through CV input) and there's two outputs for stereo sound.
Read more
MRP:$326.94
coming soon $314.53
FORTHCOMING
ADDAC System ADDAC103 T-Networks Module (black faceplate)
Cat: 776114
 
4-voice percussion module
Notes: Inspired by Twin T-Networks circuits used in many lengendary drum machines, ADDAC system have developed a simple and straight forward 4 voice percussion module with frequency controls for each of its voices.

At each voice input there's a gate to trigger converter so any input source is possible.
Audio inputs can also be used as an input, in this case and due to the nature of the gate to trigger converter, each voice can be used as very destructive filters.

The top 2 channels feature a higher frequency range, the bottom 2 channels feature a lower frequency range.

Tech Specs:
6HP
2.5 cm deep
40mA +12V
40mA -12V
Read more
MRP:$108.56
coming soon $104.13
FORTHCOMING
ADDAC System ADDAC104 VC T-Networks Module (black faceplate)
Notes: Following the ADDAC103 T-Networks, this new module is also inspired by Twin T-Networks circuits used in many lengendary drum machines. A simple 4 voice module with frequency controls for each of the voices. This new module also features CV inputs with attenuverters for each voice Frequency. Due to the specificities of the circuit, and to keep the module at a low price, these inputs are not callibrated to 1v/octave.

At each voice input there's a gate to trigger converter so any input source is possible.
Audio inputs can also be used as an input, in this case and due to the nature of the gate to trigger converter, each voice can be used as very destructive filters.

The top 2 channels feature a higher frequency range, the bottom 2 channels feature a lower frequency range.
Read more
MRP:$174.20
coming soon $167.24
FORTHCOMING
ADDAC System ADDAC105 4 Voice Cluster Module (black faceplate)
Cat: 776118
 
4-voice cluster module
Notes: Following the ADDAC103 T-Networks, this new module is inspired by it's simplicity. This is a 4 voice Square Oscillator with VCA, FM switch and a slew decay for the incoming Trigger IN. All voices are then sent through a Multimode Filter.

Each voice has it's own VCA input where any input is accepted (Trigger, Gate, CV) The [DECAY] controls the slew decay applied to the incoming signal, if [DECAY] is fully anti-clockwise then it works as a Mute. The [FM ON] switches activate/deactivate the FM input coming from the previous voice: Voice 1 FM comes from voice 4, voice 2 FM comes from voice 1, and so on, so you can FM all of them in a FM loop.

All 4 voices are summed and sent through a filter with controls over [CUTOFF] with an Attenuverter for the CV input and [RESO- NANCE]. Three filter outputs are provided [LOWPASS], [BANDPASS] and [HIGHPASS]

The [EXTERNAL IN] input can be routed through a jumper on the back of the module allowing the incoming signal to go to:
the filter input for processing an external audio source.
all of the 4 voices Frequency control allowing for some experi- mental CV control over pitch of all 4 voices at the same time (due to the specificities of the circuit and to keep the module at a low price these inputs are not callibrated to 1v/octave).

Read more
MRP:$108.56
coming soon $104.13
FORTHCOMING
ADDAC System ADDAC106 T-Noiseworks Module (black faceplate)
Notes: This is the last module in Addac System's T-Networks series, a straight forward 4 voice module with frequency and decay controls for each of the voices. As the name already unveils , a noise source has been added, and 2 different circuits have been created, that explore the timbre of a t-network when used to filter noise.

There are 2 different circuits in this module, voices 1 to 3 have a pre-vca t-network filter while in voice 4 the t-networks filter applied post-vca.

At each voice input there's a switch which sets which type of input to use, this signal will be used to control an internal VCA hence why the type of setting defined here is important:
1. Trigger - Any incoming CV will be converted into a 1ms trigger as soon as it crosses it's fixed threshold.
2. Mute - This disconnects then incoming signal effectivelly muting the voice.

3. Envelopes - This can be used with CV sources as well as Gate sources and simply follows the input signal.

This incoming signal will then be processed by a slew circuit which adds a decay factor allowing the user to set the "Tail" of each voice.

Trigger mode is mostly dedicated for percussive sounds while the Envelope mode is open to any external enve- lope control and able to control noise swooshes, swirls, crackles and pops simply out of t-networks filtered noise.

Audio inputs are also welcomed to be used as a Trigger/Envelope input.

Diferences between voices:
The first 3 voices also feature a Timbre selector switch: Hat/Snare
In Snare mode all frequencies coming from the t-networks filter pass thru to the output .
In Hat mode it adds a High Pass circuit which removes the mid/bottom frequencies (characteristic of the snare strike) creating a higher spectrum output which is closer to a Hat timbre.
All of these 3 voices are also differently tuned from each other to offer more timbrical options.

Voice 4 is closer to a typical t-networks circuit but this time peculiar one where the noise is gated by the vca and then sent through the t-networks filter.

Hat and Snare are terms used very looselly here, they are timbrical references and do not in any shape or form try to effectivelly replicate the complex timbres of a real world Hat or Snare.
Read more
MRP:$174.20
coming soon $167.24
FORTHCOMING
ADDAC System ADDAC111 Ultra .WAV Player Module (red faceplate)
Cat: 776121
 
.wav player module
Notes: The ADDAC111 ULTRA .WAV PLAYER is the long awaited upgrade to the praised ADDAC101 .WAV PLAYER.

While keeping all functions of the original, there's more dedicated controls as well as a few new functions.

For this version, Micro SD Cards were used- this decision was made in order to help the hardware construction and make it only 3cm deep.

An Expansion module, ADDAC111B, was also created to allow users to recall the first 8 files through dedicated trigger signals. This allows sequencing of files.

The Loop Size, Start Point and Sample Rate defines how the loop is played.

Loop Settings defines if sample is looping or playing only once.

File Access if it advances to the next or previous file.

The VCA section controls the overall volume of the module.

And finally the Envelope Follower generates a CV voltage related to the amplitude of the audio signal pre-VCA.
Read more
MRP:$597.07
coming soon $575.39
FORTHCOMING
ADDAC System ADDAC111B Ultra .WAV Player Expansion Module (red faceplate)
Notes: The ADDAC111B EXPANSION allows the user to access the first 8 files (a to h) through a trigger.

Files do not play simultaneously, if several triggers happen at the same time top priority goes from top to bottom- meaning that if B E and F triggers are received at once the file that will be played is file B.

The expansion module should be plugged to the back of the Ultra .Wav Player module. There's no connection to the bus boards.

Specificaitons:
Mechanical:
Format: Eurorack
Width: 16 hp
Depth: 3 cm

Control voltage i/o:
CV inputs: i 5v
CV outputs: 0 +10v

Electrical:
Max current: 150ma
Compatible with +-12v and +-15v power supplies
Bus board cable: 8x2 idc (doepfer style) connect
Read more
MRP:$130.02
coming soon $125.17
FORTHCOMING
ADDAC System ADDAC200B 2HP Buffered Multiples Module (red faceplate)
Cat: 776133
 
buffered multiples module
Notes: ADDAC System's smallest buffered multiples allow you to connect one source to its input and have it distributed through all of the 3 adjacent outputs. You get two sets of four connectors. and it can do both audio and CV!
Read more
MRP:$65.64
coming soon $63.10
FORTHCOMING
ADDAC System ADDAC200PI Pedal Integrator Module (red faceplate)
Cat: 776156
 
pedal integrator module
Notes: This small utility is the pedal's lover best friend, it allows 2 diferent chains of pedals to be independently connected to your synth.

The Send channels attenuate the synth level to instrument level.

The Return channels amplify the signal from instrument to synth level.

Specs:
. Width: 4 HP
. Depth: 3 cm
. Max current: 10mA
Read more
MRP:$97.20
coming soon $94.66
FORTHCOMING
ADDAC System ADDAC200S Size Matter Module (red faceplate)
Cat: 776135
 
adapter module
Notes: ADDAC System's 1/4 to 1/8 inch adapter allow you to connect one 1/4 inch jacks to an 1/8 inch one right in from your rack- now you can leave all those cable adapters behind.

Mechanical:
. Format: Eurorack
. Width: 4 HP
. Depth: 3.5 cm

Electrical:
. Passive
Read more
MRP:$49.23
coming soon $48.38
FORTHCOMING
ADDAC System ADDAC202 Amplifiers Module (red faceplate)
Cat: 776175
 
amplifier module
Notes: A dual channel Amplifier that either boosts your signals up to 10 times the original input or attenuates it to zero.

It also features two leds per channel, to monitor your output polarity.

MECHANICAL:
Format: Eurorack
Width: 4 HP
Depth: 2.5 cm

CONTROL VOLTAGE I/O:
CV inputs: i 10v
CV outputs: i10v

ELECTRICAL:
Max current: 30mA
Compatible with +-12v and +-15v power supplies
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$130.02
coming soon $125.17
FORTHCOMING
ADDAC System ADDAC203 CV Mapping Module (red faceplate)
Cat: 776164
 
CV mapping module
Notes: With the ADDAC203 CV mapping you'll be able to tame that voltage range and put it where it belongs. The attenuation knob compresses your voltage range and then you can also offset it.

Two channels for your mapping needs.

Mechanical:
. Format: Eurorack
. Width: 4 HP
. Depth: 3 cm

Control Voltage I/O:
. CV inputs: i 10v
. CV outputs: i 10v

Electrical:
. Compatible with +-12v and +-15v power supplies?
. Max current: 50mA
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$195.66
coming soon $188.28
FORTHCOMING
ADDAC System ADDAC204 VC CV Mapping Module (red faceplate)
Cat: 776178
 
CV mapping module
Notes: With the VC mapping module you'll be able to scale your voltage and also control its offset via CV.

This module provides two outputs for normal and inverted output voltages. A third output morphs between the normal and inverted outputs.

Mechanical:
. Format: Eurorack
. Width: 6 HP
. Depth: 2 cm

Control Voltage I/O:
. CV inputs: i 10v
. CV outputs: i 10v

Electrical:
. Compatible with +-12v and +-15v power supplies?
. Max current: 40mA
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$195.66
coming soon $188.28
FORTHCOMING
ADDAC System ADDAC206 Switching Sequencer Module (red faceplate)
Cat: 776180
 
switching sequencer module
Notes: This is a Quad Channel Switcher.

Among many other possibilities it allows to:

Turn any 4x4 step sequencer into a 16 step sequencer.
Scramble sequences with diferent clock division settings.
Route 1 audio or voltage signal to 4 diferent destinations.
Switch between 4 audio or voltage signals

MECHANICAL:
Format: Eurorack
Width: 8 HP
Depth: 3.5 cm

ELECTRICAL:
Max current: +80mA/-40mA
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector.
Read more
MRP:$292.85
coming soon $282.96
FORTHCOMING
ADDAC System ADDAC207 Intuitive Quantizer Module (red faceplate)
Notes: 4 Voices of Quantization with a 10 octave range.

Menu Reaction Time can be adjusted and saved.

User definable Scales- any scale is possible.

Simple Intuitive menu with settings such as:
User definable NOTES Intervals for Chord generation
Quantization types: Above, Below, Ignore
Definable Gate Out Length
Octave Offsets
Keyboard Mode (using Buttons as triggers)
Read more
MRP:$347.13
coming soon $334.50
FORTHCOMING
ADDAC System ADDAC208 Comparator & Rectifiers Module (red faceplate)
Notes: A Comparator is an electronic circuit that compares two voltages and switches its output to indicate which is larger. The Comparator operates between -10 or +10V

The Output is always -10V if below Threshold and +10V if above Threshold.

A Rectifier is an electronic circuit that is used to transform AC signals to an equivalent DC signal while removing one of it's polarities, i.e. Positive rectification excludes negative signals and vice-versa.
Both sections can be used to change the shape of any waveform as well as its harmonic content.

FRONTPANEL:
1 Comparator Threshold Knob
1 Comparator Jack Output
2 Comparator Monitor Led1 Common Signal Jack Input
4 Rectificated Outputs

MECHANICAL:
Format: Eurorack
Width: 4 HP
Depth: 2.5 cm

CONTROL VOLTAGE I/O:
CV inputs: i 10v
CV outputs: i10v

ELECTRICAL:
Max current: 30mA
Compatible with +-12v and +-15v power supplies
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$130.02
coming soon $125.17
FORTHCOMING
ADDAC System ADDAC209 VC Time Compensated Glide Module (red faceplate)
Cat: 776185
 
glide/slew circuit module
Notes: This is our take on a glide/slew circuit. It introduces a time compensation for the glide/slew rate so that any interval have the same glide time.

Normal glides have a fixed speed, they take X time to go up a semitone and X*12 to go up an octave. A compensation circuit was added to detect and dynamically change the speed according to the distance needed to be made, so that in the end it'll take the same time to reach the final destination no matter if the interval is 1 semitone or 3 octaves. This compensation feature (dry/wet) can controlled by the front panel knob or by CV.

Mechanical:
. Format: Eurorack
. Width: 4 HP
. Depth: 55 mm

Electrical:
. Max current: 60mA.
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector.

Included:
.black screws
.black fibre washers
Read more
MRP:$97.20
coming soon $94.66
FORTHCOMING
ADDAC System ADDAC210 Open Heart Surgery Module (red faceplate)
Cat: 776186
 
development platfom module
Notes: This is a development platform optimized for the Eurorack electronic enthusiast.

Power sources:
-12V, +12V
-3/10V, +3/10V

Ships with: 1M Ribbon Cable and 55cm standoff Spacers for desktop operation, screws and nylon washers

Mechanical Specs:
Width: 36 HP
Depth: 3.5cm (i1.375 inches) with or without Arduino installed, Depth increases if using arduino shields.
Read more
MRP:$314.31
coming soon $302.94
FORTHCOMING
ADDAC System ADDAC212 EG Map Pack Module (red faceplate)
Cat: 776195
 
VC attentuator/offset module
Notes: A 4 Channel VC Attenuator and Offset.

The ADDAC212 is a 4-channel VC attenuator and off-setter. It lets you deal with up to four parallel inputs as a single pack, modulating their amplitude and offset (± 10V) with the same control knobs, both with cv inputs and dedicated attenuators.

Features 4 parallel VCAs with the same amplitude and offset control knobs and cv inputs with dedicated attenuators.

Idealized to be the perfect companion for Envelope Generators, you can send 4 EGs through it and control the overall amplitude and offset of all 4 envelopes at once. This allows more control over the Envelopes when patching typical synth voices.
Read more
MRP:$195.66
coming soon $188.28
FORTHCOMING
ADDAC System ADDAC213A Eurorack Bridge Module (black faceplate)
Notes: A pair of ADDAC213As acts as a simple one-cable bridge between different cases. By itself the ADDAC213As can send/receive 8 CV or audio signals between your cases, but can be expanded to bridge two cases for up to 24 signals at the same time.

Use a pair of ADDAC213As to send & receive 8 CV or audio signals between distant points in your case, between two separate cases, or between your case and a friend's case. Less clatter, less spaghetti, faster connection! There's nothing better than being able to connect that controller skiff with just one cable to your main system. At a gig, in the studio, when jamming with a friend, give yourself a gift by grabbing a pair of ADDAC213As.The modules can be installed in normal position or a 180 degree position to fit any need and any case design.

Each ADDAC213A module can be connected through a ribbon cable connection on its backside with up to two ADDAC213Bs. Each ADDAC213B module added expands the channels options of the ADDAC213A by adding 8 more channels. With two 2 ADDAC213Bs connected to each ADDAC213A module, you'll have a total of 24 channels going between your cases with a simple one-cable bridge. Between the ADDAC213A pair and the ADDAC213B, your cases never looked so elegantly connected together!

The ADDAC213As are always sold as a pair of 2 modules and an included ribbon cable.

Each module can be installed in normal position or at 180 degrees.

Mechanical:
. Format: Eurorack
. Width: 6 HP
. Depth: 2.4 cm

Electrical:
Passive / Does not draw current
Ribbon Cable: 50cm or 100cm ribbon cable
Read more
MRP:$103.51
coming soon $99.92
FORTHCOMING
ADDAC System ADDAC213B Eurorack Bridge Module (black faceplate)
Notes: The ADDAC213B is the second pair of modules from ADDAC's Eurorack Bridge system.

A pair of ADDAC213Bs can be used in standalone to send/receive 8 CV or audio signals between different points inside the same case or as an expansion to the main pair of Eurorack Bridge modules, the ADDAC213As.

Two ADDAC213B modules can be connected to each other with the use of a single ribbon cable and then used inside a case to carry signals between distant points without the need for long cables. Less clatter, less spaghetti- more space of your fingers on those knobs!

ADDAC213Bs always come in pairs. A single pair can send & receive up to 8 CV or audio signals between different points in your case at the same time. The modules can be installed in normal position or a 180 degree position to fit any need.

As an Expansion to an ADDAC213A.

Each ADDAC213B connected to the backside of an ADDAC213A adds 8 more channels to the main bridging functionality of the ADDAC213A.

Up to 2 ADDAC213B can be connected to an ADDAC213A module, expanding the bridging between two difference cases to a total of 24 channels.

If you're looking for a simple one-cable bridge between your various cases, then look no further than the ADDAC213A.

Between the ADDAC213A pair and the ADDAC213B, your cases never looked so elegantly connected together!

Each module can be installed in normal position or at 180 degrees.

Mechanical:
. Format: Eurorack
. Width: 3 HP
. Depth: 2.5 cm

Electrical:
Passive / Does not draw current
Ribbon Cable: 50cm or 100cm ribbon cable
Read more
MRP:$87.10
coming soon $84.14
Items 51 to 100 of 1,010 on page 2 of 21
«  1  2  3  ...  21  »

Filter

Synth modules
商品
Release Date
Close